eaw/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

pinctrl: stm32: Convert to use APIs which support live DT

Browse Source 
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrick Delaunay
2020-09-09 17:50:14 +02:00
parent cb08e84d68
commit d3bfad266c
1 changed files with 23 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

43
drivers/pinctrl/pinctrl_stm32.c
View File

@@ -13,8 +13,6 @@
#include <linux/err.h>
#include <linux/libfdt.h>
DECLARE_GLOBAL_DATA_PTR;
#define MAX_PINS_ONE_IP 70
#define MODE_BITS_MASK 3
#define OSPEED_MASK 3
@@ -308,7 +306,8 @@ static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin)
return 0;
}
static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn,
ofnode node)
{
gpio_fn &= 0x00FF;
gpio_ctl->af = 0;
@@ -329,16 +328,16 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
break;
}
gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0);
gpio_ctl->speed = ofnode_read_u32_default(node, "slew-rate", 0);
if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain"))
if (ofnode_read_bool(node, "drive-open-drain"))
gpio_ctl->otype = STM32_GPIO_OTYPE_OD;
else
gpio_ctl->otype = STM32_GPIO_OTYPE_PP;
if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up"))
if (ofnode_read_bool(node, "bias-pull-up"))
gpio_ctl->pupd = STM32_GPIO_PUPD_UP;
else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down"))
else if (ofnode_read_bool(node, "bias-pull-down"))
gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN;
else
gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
@@ -350,32 +349,37 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
return 0;
}
static int stm32_pinctrl_config(int offset)
static int stm32_pinctrl_config(ofnode node)
{
u32 pin_mux[MAX_PINS_ONE_IP];
int rv, len;
ofnode subnode;
/*
* check for "pinmux" property in each subnode (e.g. pins1 and pins2 for
* usart1) of pin controller phandle "pinctrl-0"
* */
fdt_for_each_subnode(offset, gd->fdt_blob, offset) {
ofnode_for_each_subnode(subnode, node) {
struct stm32_gpio_dsc gpio_dsc;
struct stm32_gpio_ctl gpio_ctl;
int i;
len = fdtdec_get_int_array_count(gd->fdt_blob, offset,
"pinmux", pin_mux,
ARRAY_SIZE(pin_mux));
rv = ofnode_read_size(subnode, "pinmux");
if (rv < 0)
return rv;
len = rv / sizeof(pin_mux[0]);
debug("%s: no of pinmux entries= %d\n", __func__, len);
if (len < 0)
if (len > MAX_PINS_ONE_IP)
return -EINVAL;
rv = ofnode_read_u32_array(subnode, "pinmux", pin_mux, len);
if (rv < 0)
return rv;
for (i = 0; i < len; i++) {
struct gpio_desc desc;
debug("%s: pinmux = %x\n", __func__, *(pin_mux + i));
prep_gpio_dsc(&gpio_dsc, *(pin_mux + i));
prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), offset);
prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), subnode);
rv = uclass_get_device_by_seq(UCLASS_GPIO,
gpio_dsc.port,
&desc.dev);
@@ -424,19 +428,18 @@ static int stm32_pinctrl_bind(struct udevice *dev)
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
static int stm32_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
return stm32_pinctrl_config(dev_of_offset(config));
return stm32_pinctrl_config(dev_ofnode(config));
}
#else /* PINCTRL_FULL */
static int stm32_pinctrl_set_state_simple(struct udevice *dev,
struct udevice *periph)
{
const void *fdt = gd->fdt_blob;
const fdt32_t *list;
uint32_t phandle;
int config_node;
ofnode config_node;
int size, i, ret;
list = fdt_getprop(fdt, dev_of_offset(periph), "pinctrl-0", &size);
list = ofnode_get_property(dev_ofnode(periph), "pinctrl-0", &size);
if (!list)
return -EINVAL;
@@ -446,8 +449,8 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev,
for (i = 0; i < size; i++) {
phandle = fdt32_to_cpu(*list++);
config_node = fdt_node_offset_by_phandle(fdt, phandle);
if (config_node < 0) {
config_node = ofnode_get_by_phandle(phandle);
if (!ofnode_valid(config_node)) {
pr_err("prop pinctrl-0 index %d invalid phandle\n", i);
return -EINVAL;
}