eaw/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

colibri-imx6ull: migrate mmc to using driver model

Browse Source 
Migrate MMC to using driver model.
Migrate USDHC to using pinctrl.
While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
This commit is contained in:
Marcel Ziswiler
2019-04-09 17:24:15 +02:00
committed by Stefano Babic
parent cd69e8ef9b
commit 535800d33f
4 changed files with 17 additions and 75 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
arch/arm/dts/imx6ull-colibri.dts
View File

@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2018 Toradex AG
* Copyright 2018-2019 Toradex AG
*/
/dts-v1/;
@@ -11,6 +11,10 @@
model = "Toradex Colibri iMX6ULL";
compatible = "toradex,imx6ull-colibri", "fsl,imx6ull";
aliases {
mmc0 = &usdhc1;
};
chosen {
stdout-path = &uart1;
};
@@ -190,10 +194,18 @@
dr_mode = "host";
};
/* Colibri MMC */
&usdhc1 {
assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
vmmc-supply = <&reg_sd1_vmmc>;
status = "okay";
};
&iomuxc {
@@ -547,4 +559,3 @@
>;
};
};

70
board/toradex/colibri-imx6ull/colibri-imx6ull.c
View File

@@ -18,11 +18,9 @@
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <imx_thermal.h>
#include <jffs2/load_kernel.h>
#include <linux/sizes.h>
#include <mmc.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <netdev.h>
@@ -34,10 +32,6 @@
DECLARE_GLOBAL_DATA_PTR;
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
PAD_CTL_DSE_48ohm)
@@ -56,19 +50,6 @@ int dram_init(void)
return 0;
}
#ifdef CONFIG_FSL_ESDHC
static iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
#endif
static iomux_v3_cfg_t const usb_cdet_pads[] = {
MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
@@ -135,57 +116,6 @@ static int setup_lcd(void)
}
#endif
#ifdef CONFIG_FSL_ESDHC
#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0)
static struct fsl_esdhc_cfg usdhc_cfg[] = {
{USDHC1_BASE_ADDR, 0, 4},
};
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
switch (cfg->esdhc_base) {
case USDHC1_BASE_ADDR:
ret = !gpio_get_value(USDHC1_CD_GPIO);
break;
}
return ret;
}
int board_mmc_init(bd_t *bis)
{
int i, ret;
/* USDHC1 is mmc0 */
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
ARRAY_SIZE(usdhc1_pads));
gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
gpio_direction_input(USDHC1_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
break;
default:
printf("Warning: you configured more USDHC controllers"
"(%d) than supported by the board\n", i + 1);
return -EINVAL;
}
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
if (ret)
return ret;
}
return 0;
}
#endif
#ifdef CONFIG_FEC_MXC
static int setup_fec(void)
{

1
configs/colibri-imx6ull_defconfig
View File

@@ -50,6 +50,7 @@ CONFIG_DFU_NAND=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_NAND=y

6
include/configs/colibri-imx6ull.h
View File

@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018 Toradex AG
* Copyright 2018-2019 Toradex AG
*
* Configuration settings for the Colibri iMX6ULL module.
*
@@ -30,7 +30,7 @@
/* ENET1 */
#define IMX_FEC_BASE ENET2_BASE_ADDR
/* MMC Config*/
/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
@@ -182,4 +182,4 @@
#define CONFIG_VIDEO_BMP_LOGO
#endif
#endif
#endif /* __COLIBRI_IMX6ULL_CONFIG_H */