eaw/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch '2021-09-04-makefile-cleanups-part-b' into next

Browse Source 
- Further Makefile/Kconfig namespace cleanups from Simon.  This migrates
  a number of symbols to Kconfig and replaces some inconsistencies
  between CONFIG_FOO and CONFIG_SPL_FOO_SUPPORT/CONFIG_TPL_FOO_SUPPORT.
This commit is contained in:
Tom Rini
2021-09-04 15:43:59 -04:00
parent a48f5ff4f5 9f6649209f
commit 21b86803eb
463 changed files with 1131 additions and 973 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
Makefile
View File

@@ -813,23 +813,9 @@ libs-y += fs/
libs-y += net/
libs-y += disk/
libs-y += drivers/
libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/net/
libs-y += drivers/net/phy/
libs-y += drivers/power/ \
drivers/power/domain/ \
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
drivers/power/battery/ \
drivers/power/regulator/
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/cdns3/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/

8
arch/Kconfig
View File

@@ -120,7 +120,7 @@ config RISCV
imply SPL_OF_CONTROL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_TIMER
config SANDBOX
@@ -259,9 +259,9 @@ config X86
imply SPL_PINCTRL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
imply SPL_SPI
imply SPL_OF_CONTROL
imply SPL_TIMER
imply SPL_REGMAP
@@ -273,7 +273,7 @@ config X86
imply TPL_PINCTRL
imply TPL_LIBCOMMON_SUPPORT
imply TPL_LIBGENERIC_SUPPORT
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_OF_CONTROL
imply TPL_TIMER
imply TPL_REGMAP

10
arch/arm/Kconfig
View File

@@ -966,7 +966,7 @@ config ARCH_SOCFPGA
select SPL_NAND_SUPPORT if SPL_NAND_DENALI
select SPL_OF_CONTROL
select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYSRESET
select SPL_WATCHDOG
select SUPPORT_SPL
@@ -986,11 +986,11 @@ config ARCH_SOCFPGA
imply SPL_DM_SPI
imply SPL_DM_SPI_FLASH
imply SPL_LIBDISK_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
imply SPL_SPI
imply L2X0_CACHE
config ARCH_SUNXI
@@ -1036,9 +1036,9 @@ config ARCH_SUNXI
imply SPL_GPIO
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT if MMC
imply SPL_MMC if MMC
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply USB_GADGET
config ARCH_U8500

4
arch/arm/cpu/arm926ejs/mxs/spl_boot.c
View File

@@ -23,7 +23,7 @@
DECLARE_GLOBAL_DATA_PTR;
static gd_t gdata __section(".data");
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
static struct bd_info bdata __section(".data");
#endif
@@ -108,7 +108,7 @@ static void mxs_spl_fixup_vectors(void)
static void mxs_spl_console_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
gd->bd = &bdata;
gd->baudrate = CONFIG_BAUDRATE;
serial_init();

2
arch/arm/cpu/armv7/ls102xa/spl.c
View File

@@ -8,7 +8,7 @@
u32 spl_boot_device(void)
{
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
return BOOT_DEVICE_MMC1;
#endif
return BOOT_DEVICE_NAND;

2
arch/arm/cpu/armv8/fsl-layerscape/spl.c
View File

@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
u32 spl_boot_device(void)
{
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
return BOOT_DEVICE_MMC1;
#endif
#ifdef CONFIG_SPL_NAND_SUPPORT

2
arch/arm/mach-at91/spl_at91.c
View File

@@ -136,7 +136,7 @@ void board_init_f(ulong dummy)
at91_periph_clk_enable(ATMEL_ID_PIOC);
#endif
#if defined(CONFIG_SPL_SERIAL_SUPPORT)
#if defined(CONFIG_SPL_SERIAL)
/* init console */
at91_seriald_hw_init();
preloader_console_init();

2
arch/arm/mach-davinci/spl.c
View File

@@ -51,7 +51,7 @@ u32 spl_boot_device(void)
return BOOT_DEVICE_NAND;
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
case DAVINCI_SD_OR_MMC_BOOT:
case DAVINCI_MMC_ONLY_BOOT:
return BOOT_DEVICE_MMC1;

2
arch/arm/mach-exynos/lowlevel_init.c
View File

@@ -218,7 +218,7 @@ int do_lowlevel_init(void)
if (actions & DO_CLOCKS) {
system_clock_init();
#ifdef CONFIG_DEBUG_UART
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL_SUPPORT)) || \
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \
!defined(CONFIG_SPL_BUILD)
exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
debug_uart_init();

4
arch/arm/mach-imx/image-container.c
View File

@@ -73,7 +73,7 @@ static int get_dev_container_size(void *dev, int dev_type, unsigned long offset,
return -ENOMEM;
}
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
if (dev_type == MMC_DEV) {
unsigned long count = 0;
struct mmc *mmc = (struct mmc *)dev;
@@ -213,7 +213,7 @@ unsigned long spl_spi_get_uboot_offs(struct spi_flash *flash)
}
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
unsigned long raw_sect)
{

4
arch/arm/mach-imx/mx6/Kconfig
View File

@@ -304,12 +304,12 @@ config TARGET_MX6DL_MAMOJ
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC_SUPPORT if SPL
select SPL_MMC if SPL
select SPL_OF_CONTROL if SPL
select SPL_OF_LIBFDT if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
select SPL_SERIAL if SPL
select SPL_USB_GADGET if SPL
select SPL_USB_HOST if SPL
select SPL_USB_SDP_SUPPORT if SPL

2
arch/arm/mach-imx/spl.c
View File

@@ -199,7 +199,7 @@ int g_dnl_get_board_bcd_device_number(int gcnum)
}
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)
#if defined(CONFIG_SPL_MMC)
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
u32 spl_mmc_boot_mode(const u32 boot_device)
{

2
arch/arm/mach-k3/sysfw-loader.c
View File

@@ -370,7 +370,7 @@ void k3_sysfw_loader(bool rom_loaded_sysfw,
/* Load combined System Controller firmware and config data image */
switch (bootdev.boot_device) {
#if CONFIG_IS_ENABLED(MMC_SUPPORT)
#if CONFIG_IS_ENABLED(MMC)
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:

4
arch/arm/mach-mediatek/spl.c
View File

@@ -31,9 +31,9 @@ void board_init_f(ulong dummy)
u32 spl_boot_device(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
return BOOT_DEVICE_SPI;
#elif defined(CONFIG_SPL_MMC_SUPPORT)
#elif defined(CONFIG_SPL_MMC)
return BOOT_DEVICE_MMC1;
#elif defined(CONFIG_SPL_NAND_SUPPORT)
return BOOT_DEVICE_NAND;

6
arch/arm/mach-mvebu/Kconfig
View File

@@ -282,7 +282,7 @@ config MVEBU_SPL_BOOT_DEVICE_SPI
imply SPL_DM_SPI
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_LOAD
imply SPL_SPI_SUPPORT
imply SPL_SPI
select SPL_BOOTROM_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_MMC
@@ -293,12 +293,12 @@ config MVEBU_SPL_BOOT_DEVICE_MMC
imply SPL_DM_MMC
imply SPL_GPIO
imply SPL_LIBDISK_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
select SPL_BOOTROM_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_SATA
bool "SATA"
imply SPL_SATA_SUPPORT
imply SPL_SATA
imply SPL_LIBDISK_SUPPORT
select SPL_BOOTROM_SUPPORT

21
arch/arm/mach-mvebu/spl.c
View File

@@ -17,7 +17,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC_SUPPORT) || defined(CONFIG_SPL_SATA_SUPPORT)
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \
defined(CONFIG_SPL_SATA)
/*
* When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must
@@ -39,7 +40,7 @@
* and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET need to point to the
* kwbimage main header.
*/
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is unsupported
#endif
@@ -56,7 +57,7 @@
* stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be
* set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
*/
#ifdef CONFIG_SPL_SATA_SUPPORT
#ifdef CONFIG_SPL_SATA
#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
#error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
#endif
@@ -92,7 +93,7 @@ struct kwbimage_main_hdr_v1 {
uint8_t checksum; /* 0x1F */
} __packed;
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
u32 spl_mmc_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
@@ -121,10 +122,10 @@ int spl_parse_board_header(struct spl_image_info *spl_image,
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
mhdr->blockid != IBR_HDR_SPI_ID &&
#endif
#ifdef CONFIG_SPL_SATA_SUPPORT
#ifdef CONFIG_SPL_SATA
mhdr->blockid != IBR_HDR_SATA_ID &&
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
mhdr->blockid != IBR_HDR_SDIO_ID &&
#endif
1
@@ -135,7 +136,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image,
spl_image->offset = mhdr->srcaddr;
#ifdef CONFIG_SPL_SATA_SUPPORT
#ifdef CONFIG_SPL_SATA
/*
* For SATA srcaddr is specified in number of sectors.
* The main header is must be stored at sector number 1.
@@ -152,7 +153,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image,
}
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
/*
* For SDIO (eMMC) srcaddr is specified in number of sectors.
* This expects that sector size is 512 bytes and recalculates
@@ -261,11 +262,11 @@ u32 spl_boot_device(void)
* If SPL is compiled with chosen boot_device support
* then use SPL driver for loading U-Boot proper.
*/
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
case BOOT_DEVICE_MMC1:
return BOOT_DEVICE_MMC1;
#endif
#ifdef CONFIG_SPL_SATA_SUPPORT
#ifdef CONFIG_SPL_SATA
case BOOT_FROM_SATA:
return BOOT_FROM_SATA;
#endif

12
arch/arm/mach-omap2/Kconfig
View File

@@ -20,11 +20,11 @@ config OMAP34XX
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SUPPORT
imply SPL_OMAP3_ID_NAND
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
imply TWL4030_POWER
@@ -42,11 +42,11 @@ config OMAP44XX
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SIMPLE
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
@@ -66,12 +66,12 @@ config OMAP54XX
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
config TI814X

8
arch/arm/mach-omap2/am33xx/Kconfig
View File

@@ -46,12 +46,12 @@ config TARGET_AM335X_EVM
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SUPPORT
imply SPL_OF_LIBFDT
imply SPL_POWER
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_WATCHDOG
imply SPL_YMODEM_SUPPORT
@@ -230,10 +230,10 @@ config TARGET_AM43XX_EVM
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_WATCHDOG
imply SPL_YMODEM_SUPPORT
help

2
arch/arm/mach-rmobile/Kconfig
View File

@@ -29,7 +29,7 @@ config RCAR_GEN3
imply SPL_GZIP
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_TINY_MEMSET
imply SPL_YMODEM_SUPPORT

28
arch/arm/mach-rockchip/Kconfig
View File

@@ -11,8 +11,8 @@ config ROCKCHIP_PX30
select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
select TPL_NEEDS_SEPARATE_STACK if TPL
imply SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select TPL_SERIAL_SUPPORT
select SPL_SERIAL
select TPL_SERIAL
select DEBUG_UART_BOARD_INIT
imply ROCKCHIP_COMMON_BOARD
imply SPL_ROCKCHIP_COMMON_BOARD
@@ -84,9 +84,9 @@ config ROCKCHIP_RK322X
select TPL_NEEDS_SEPARATE_STACK if TPL
select SPL_DRIVERS_MISC
imply ROCKCHIP_COMMON_BOARD
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_ROCKCHIP_COMMON_BOARD
select TPL_LIBCOMMON_SUPPORT
select TPL_LIBGENERIC_SUPPORT
@@ -119,7 +119,7 @@ config ROCKCHIP_RK3288
imply TPL_RAM
imply TPL_REGMAP
imply TPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_SYSCON
imply USB_FUNCTION_ROCKUSB
imply CMD_ROCKUSB
@@ -146,8 +146,8 @@ config ROCKCHIP_RK3308
imply SPL_REGMAP
imply SPL_SYSCON
imply SPL_RAM
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply SPL_SEPARATE_BSS
help
The Rockchip RK3308 is a ARM-based Soc which embedded with quad
@@ -165,8 +165,8 @@ config ROCKCHIP_RK3328
imply ROCKCHIP_COMMON_BOARD
imply ROCKCHIP_SDRAM_COMMON
imply SPL_ROCKCHIP_COMMON_BOARD
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply SPL_SEPARATE_BSS
select ENABLE_ARM_SOC_BOOT0_HOOK
select DEBUG_UART_BOARD_INIT
@@ -188,8 +188,8 @@ config ROCKCHIP_RK3368
imply ROCKCHIP_COMMON_BOARD
imply SPL_ROCKCHIP_COMMON_BOARD
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply TPL_ROCKCHIP_COMMON_BOARD
help
The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
@@ -219,7 +219,7 @@ config ROCKCHIP_RK3399
select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
select TPL_NEEDS_SEPARATE_STACK if TPL
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_DRIVERS_MISC
select CLK
select FIT
@@ -235,7 +235,7 @@ config ROCKCHIP_RK3399
imply ROCKCHIP_SDRAM_COMMON
imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
imply SPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_LIBCOMMON_SUPPORT
imply TPL_LIBGENERIC_SUPPORT
imply TPL_SYS_MALLOC_SIMPLE
@@ -382,7 +382,7 @@ config TPL_ROCKCHIP_EARLYRETURN_TO_BROM
This enables support code in the BOOT0 hook for the TPL stage
to allow multiple entries.
config SPL_MMC_SUPPORT
config SPL_MMC
default y if !SPL_ROCKCHIP_BACK_TO_BROM
config ROCKCHIP_SPI_IMAGE

2
arch/arm/mach-rockchip/px30/Kconfig
View File

@@ -36,7 +36,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LDSCRIPT

2
arch/arm/mach-rockchip/rk3036/Kconfig
View File

@@ -22,7 +22,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
source "board/rockchip/evb_rk3036/Kconfig"

2
arch/arm/mach-rockchip/rk3188/Kconfig
View File

@@ -24,7 +24,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LIBCOMMON_SUPPORT

2
arch/arm/mach-rockchip/rk322x/Kconfig
View File

@@ -20,7 +20,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_MAX_SIZE

2
arch/arm/mach-rockchip/rk3288/Kconfig
View File

@@ -163,7 +163,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LDSCRIPT

2
arch/arm/mach-rockchip/rk3308/Kconfig
View File

@@ -14,7 +14,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config ROCKCHIP_BOOT_MODE_REG

2
arch/arm/mach-rockchip/tpl.c
View File

@@ -48,7 +48,7 @@ void board_init_f(ulong dummy)
struct udevice *dev;
int ret;
#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL)
/*
* Debug UART can be used from here if required:
*

2
arch/arm/mach-socfpga/spl_a10.c
View File

@@ -93,7 +93,7 @@ u32 spl_boot_device(void)
}
}
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
u32 spl_mmc_boot_mode(const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)

2
arch/arm/mach-socfpga/spl_gen5.c
View File

@@ -52,7 +52,7 @@ u32 spl_boot_device(void)
}
}
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
u32 spl_mmc_boot_mode(const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)

2
arch/arm/mach-socfpga/spl_soc64.c
View File

@@ -14,7 +14,7 @@ u32 spl_boot_device(void)
return BOOT_DEVICE_MMC1;
}
#if IS_ENABLED(CONFIG_SPL_MMC_SUPPORT)
#if IS_ENABLED(CONFIG_SPL_MMC)
u32 spl_boot_mode(const u32 boot_device)
{
if (IS_ENABLED(CONFIG_SPL_FS_FAT) || IS_ENABLED(CONFIG_SPL_FS_EXT4))

2
arch/arm/mach-stm32/Kconfig
View File

@@ -41,7 +41,7 @@ config STM32F7
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_RAM
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYS_MALLOC_SIMPLE
select SPL_TIMER
select SPL_XIP_SUPPORT

4
arch/arm/mach-stm32mp/Kconfig
View File

@@ -15,14 +15,14 @@ config SPL
select SPL_PINCTRL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYSCON
select SPL_WATCHDOG if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI
config SYS_SOC
default "stm32mp"

2
arch/arm/mach-tegra/Kconfig
View File

@@ -9,7 +9,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TEGRA_CLKRST

2
arch/arm/mach-uniphier/Makefile
View File

@@ -6,7 +6,7 @@ obj-y += boards.o
obj-y += spl_board_init.o
obj-y += memconf.o
obj-y += bcu/
obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc-boot-mode.o
obj-$(CONFIG_SPL_MMC) += mmc-boot-mode.o
else

6
arch/arm/mach-zynq/Kconfig
View File

@@ -15,16 +15,16 @@ config SPL_LIBDISK_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_MMC_SUPPORT
config SPL_MMC
default y if MMC_SDHCI_ZYNQ
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config SPL_SPI_FLASH_SUPPORT
default y if ZYNQ_QSPI
config SPL_SPI_SUPPORT
config SPL_SPI
default y if ZYNQ_QSPI
config ZYNQ_DDRC_INIT

4
arch/arm/mach-zynq/spl.c
View File

@@ -45,7 +45,7 @@ u32 spl_boot_device(void)
u32 mode;
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
case ZYNQ_BM_QSPI:
mode = BOOT_DEVICE_SPI;
break;
@@ -56,7 +56,7 @@ u32 spl_boot_device(void)
case ZYNQ_BM_NOR:
mode = BOOT_DEVICE_NOR;
break;
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
case ZYNQ_BM_SD:
mode = BOOT_DEVICE_MMC1;
break;

6
arch/arm/mach-zynqmp/Kconfig
View File

@@ -12,16 +12,16 @@ config SPL_LIBDISK_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_MMC_SUPPORT
config SPL_MMC
default y if MMC_SDHCI_ZYNQ
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config SPL_SPI_FLASH_SUPPORT
default y if ZYNQ_QSPI
config SPL_SPI_SUPPORT
config SPL_SPI
default y if ZYNQ_QSPI
config SYS_BOARD

6
arch/arm/mach-zynqmp/spl.c
View File

@@ -88,7 +88,7 @@ u32 spl_boot_device(void)
switch (bootmode) {
case JTAG_MODE:
return BOOT_DEVICE_RAM;
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
case SD_MODE1:
case SD1_LSHFT_MODE: /* not working on silicon v1 */
return BOOT_DEVICE_MMC2;
@@ -100,11 +100,11 @@ u32 spl_boot_device(void)
case USB_MODE:
return BOOT_DEVICE_DFU;
#endif
#ifdef CONFIG_SPL_SATA_SUPPORT
#ifdef CONFIG_SPL_SATA
case SW_SATA_MODE:
return BOOT_DEVICE_SATA;
#endif
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
return BOOT_DEVICE_SPI;

2
arch/mips/mach-mtmips/Kconfig
View File

@@ -68,7 +68,7 @@ config SOC_MT7628
select SPL_OF_CONTROL if SPL_DM
select SPL_SIMPLE_BUS if SPL_DM
select SPL_DM_SERIAL if SPL_DM
select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT
select SPL_CLK if SPL_DM && SPL_SERIAL
select SPL_SYSRESET if SPL_DM
select SPL_OF_LIBFDT if SPL_OF_CONTROL
help

4
arch/mips/mach-mtmips/mt7620/serial.c
View File

@@ -23,7 +23,7 @@ void board_debug_uart_init(void)
void mtmips_spl_serial_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
#if CONFIG_CONS_INDEX == 1
@@ -32,5 +32,5 @@ void mtmips_spl_serial_init(void)
clrsetbits_32(base + SYSCTL_GPIOMODE_REG, UARTF_SHARE_MODE_M,
UARTF_MODE_UARTF_GPIO << UARTF_SHARE_MODE_S);
#endif
#endif /* CONFIG_SPL_SERIAL_SUPPORT */
#endif /* CONFIG_SPL_SERIAL */
}

4
arch/mips/mach-mtmips/mt7628/Kconfig
View File

@@ -29,7 +29,7 @@ config BOARD_MT7628_RFB
config BOARD_VOCORE2
bool "VoCore2"
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_UART2_SPIS_PINMUX
help
VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
@@ -39,7 +39,7 @@ endchoice
config SPL_UART2_SPIS_PINMUX
bool "Use alternative pinmux for UART2 in SPL stage"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.

4
arch/mips/mach-mtmips/mt7628/serial.c
View File

@@ -11,7 +11,7 @@
void mtmips_spl_serial_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
#if CONFIG_CONS_INDEX == 1
@@ -30,5 +30,5 @@ void mtmips_spl_serial_init(void)
1 << SPIS_MODE_S);
#endif /* CONFIG_SPL_UART2_SPIS_PINMUX */
#endif /* CONFIG_CONS_INDEX */
#endif /* CONFIG_SPL_SERIAL_SUPPORT */
#endif /* CONFIG_SPL_SERIAL */
}

2
arch/mips/mach-mtmips/spl.c
View File

@@ -17,7 +17,7 @@ void __noreturn board_init_f(ulong dummy)
{
spl_init();
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
/*
* mtmips_spl_serial_init() is useful if debug uart is enabled,
* or DM based serial is not enabled.

4
arch/powerpc/cpu/mpc83xx/Kconfig
View File

@@ -119,7 +119,7 @@ config MPC83XX_PCIE2_SUPPORT
config MPC83XX_SDHC_SUPPORT
bool
config MPC83XX_SATA_SUPPORT
config MPC83XX_SATA
bool
config MPC83XX_SECOND_I2C
@@ -198,7 +198,7 @@ config ARCH_MPC837X
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_PCIE2_SUPPORT
select MPC83XX_SDHC_SUPPORT
select MPC83XX_SATA_SUPPORT
select MPC83XX_SATA
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
select SYS_CACHE_SHIFT_5

8
arch/x86/cpu/apollolake/Kconfig
View File

@@ -12,10 +12,10 @@ config INTEL_APOLLOLAKE
select INTEL_SOC
select INTEL_PMC
select TPL_X86_TSC_TIMER_NATIVE
select SPL_PCH_SUPPORT
select TPL_PCH_SUPPORT
select SPL_PCH
select TPL_PCH
select PCIEX_LENGTH_256MB
select PCH_SUPPORT
select PCH
select P2SB
select SMP_AP_WORK
select INTEL_GMA_SWSMISCI
@@ -88,7 +88,7 @@ config CPU_ADDR_BITS
config APL_SPI_FLASH_BOOT
bool "Support booting with SPI-flash driver instead memory-mapped SPI"
select TPL_SPI_FLASH_SUPPORT
select TPL_SPI_SUPPORT
select TPL_SPI
select TPL_DM_SPI
select TPL_DM_SPI_FLASH
help

2
board/AndesTech/ax25-ae350/ax25-ae350.c
View File

@@ -109,7 +109,7 @@ void board_boot_order(u32 *spl_boot_list)
#ifdef CONFIG_SPL_RAM_SUPPORT
BOOT_DEVICE_RAM,
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
BOOT_DEVICE_MMC1,
#endif
};

4
board/advantech/imx8qm_rom7720_a1/spl.c
View File

@@ -172,7 +172,7 @@ int board_mmc_getcd(struct mmc *mmc)
void spl_board_init(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_ON)) {
puts("Warning: failed to initialize FSPI0\n");
@@ -185,7 +185,7 @@ void spl_board_init(void)
void spl_board_prepare_for_boot(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_OFF)) {
puts("Warning: failed to turn off FSPI0\n");

4
board/compulab/cl-som-imx7/cl-som-imx7.c
View File

@@ -267,7 +267,7 @@ int board_init(void)
return 0;
}
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
#define I2C_PMIC 0
int power_init_board(void)
{
@@ -293,7 +293,7 @@ int power_init_board(void)
return 0;
}
#endif /* CONFIG_POWER */
#endif /* CONFIG_IS_ENABLED(POWER_LEGACY) */
/*
* cl_som_imx7_setup_wdog() - watchdog configuration.

6
board/compulab/cl-som-imx7/spl.c
View File

@@ -157,15 +157,15 @@ static void cl_som_imx7_spl_dram_cfg(void)
}
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void cl_som_imx7_spl_spi_init(void)
{
cl_som_imx7_espi1_pads_set();
}
#else /* !CONFIG_SPL_SPI_SUPPORT */
#else /* !CONFIG_SPL_SPI */
static void cl_som_imx7_spl_spi_init(void) {}
#endif /* CONFIG_SPL_SPI_SUPPORT */
#endif /* CONFIG_SPL_SPI */
void board_init_f(ulong dummy)
{

4
board/compulab/cm_fx6/spl.c
View File

@@ -302,7 +302,7 @@ static void cm_fx6_setup_uart(void)
enable_uart_clk(1);
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void cm_fx6_setup_ecspi(void)
{
cm_fx6_set_ecspi_iomux();
@@ -350,7 +350,7 @@ void board_boot_order(u32 *spl_boot_list)
}
}
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
static struct fsl_esdhc_cfg usdhc_cfg = {
.esdhc_base = USDHC3_BASE_ADDR,
.max_bus_width = 4,

2
board/embest/mx6boards/mx6boards.c
View File

@@ -473,7 +473,7 @@ void board_init_f(ulong dummy)
/* setup GP timer */
timer_init();
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
setup_iomux_uart();
preloader_console_init();
#endif

2
board/freescale/imx8mp_evk/spl.c
View File

@@ -63,7 +63,7 @@ struct i2c_pads_info i2c_pad_info1 = {
},
};
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
#define I2C_PMIC 0
int power_init_board(void)
{

2
board/freescale/imx8mq_evk/spl.c
View File

@@ -156,7 +156,7 @@ int board_mmc_init(struct bd_info *bis)
return 0;
}
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
#define I2C_PMIC 0
int power_init_board(void)
{

2
board/imgtec/ci20/ci20.c
View File

@@ -254,7 +254,7 @@ int checkboard(void)
#ifdef CONFIG_SPL_BUILD
#if defined(CONFIG_SPL_MMC_SUPPORT)
#if defined(CONFIG_SPL_MMC)
int board_mmc_init(struct bd_info *bd)
{
ci20_mux_mmc();

4
board/liebherr/display5/spl.c
View File

@@ -273,7 +273,7 @@ static void spl_dram_init(void)
#endif
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void displ5_init_ecspi(void)
{
displ5_set_iomux_ecspi_spl();
@@ -283,7 +283,7 @@ static void displ5_init_ecspi(void)
static inline void displ5_init_ecspi(void) { }
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
#ifdef CONFIG_SPL_MMC
static struct fsl_esdhc_cfg usdhc_cfg = {
.esdhc_base = USDHC4_BASE_ADDR,
.max_bus_width = 8,

2
board/samsung/common/board.c
View File

@@ -185,7 +185,7 @@ int board_early_init_f(void)
}
#endif
#if defined(CONFIG_POWER) || defined(CONFIG_DM_PMIC)
#if CONFIG_IS_ENABLED(POWER_LEGACY) || CONFIG_IS_ENABLED(DM_PMIC)
int power_init_board(void)
{
set_ps_hold_ctrl();

2
board/technexion/pico-imx7d/pico-imx7d.c
View File

@@ -60,7 +60,7 @@ int dram_init(void)
return 0;
}
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
#define I2C_PMIC 3
int power_init_board(void)
{

2
board/ti/am335x/board.c
View File

@@ -249,7 +249,7 @@ static struct emif_regs ddr3_icev2_emif_reg_data = {
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
/* break into full u-boot on 'c' */
if (serial_tstc() && serial_getc() == 'c')
return 1;

2
board/tqc/tqma6/tqma6.c
View File

@@ -247,7 +247,7 @@ static const char *tqma6_get_boardname(void)
};
}
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
/* setup board specific PMIC */
int power_init_board(void)
{

2
board/udoo/neo/neo.c
View File

@@ -96,7 +96,7 @@ static struct i2c_pads_info i2c_pad_info1 = {
};
#endif
#ifdef CONFIG_POWER
#if CONFIG_IS_ENABLED(POWER_LEGACY)
int power_init_board(void)
{
struct pmic *p;

6
common/Makefile
View File

@@ -69,7 +69,7 @@ endif
obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
obj-$(CONFIG_SPL_NET) += miiphyutil.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
ifdef CONFIG_SPL_USB_HOST
@@ -88,9 +88,9 @@ obj-$(CONFIG_HWCONFIG) += hwconfig.o
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_TPL_BUILD
obj-$(CONFIG_TPL_SERIAL_SUPPORT) += console.o
obj-$(CONFIG_TPL_SERIAL) += console.o
else
obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
obj-$(CONFIG_SPL_SERIAL) += console.o
endif
else
obj-y += console.o

85
common/spl/Kconfig
View File

@@ -196,7 +196,7 @@ config SPL_BOOTCOUNT_LIMIT
config SPL_RAW_IMAGE_SUPPORT
bool "Support SPL loading and booting of RAW images"
default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT))
default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA))
default y if !TI_SECURE_DEVICE
help
SPL will support loading and booting a RAW image when this option
@@ -495,7 +495,7 @@ config SPL_FIT_IMAGE_TINY
ensure this information is available to the next image
invoked).
config SPL_CACHE_SUPPORT
config SPL_CACHE
bool "Support CACHE drivers"
help
Enable CACHE drivers in SPL. These drivers can keep data so that
@@ -585,12 +585,13 @@ config SPL_SAVEENV
config SPL_ETH
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
depends on SPL_NET
help
Enable access to the network subsystem and associated Ethernet
drivers in SPL. This permits SPL to load U-Boot over an Ethernet
link rather than from an on-board peripheral. Environment support
is required since the network stack uses a number of environment
variables. See also SPL_NET_SUPPORT.
variables. See also SPL_NET.
config SPL_FS_EXT4
bool "Support EXT filesystems"
@@ -700,7 +701,7 @@ config SPL_DM_MAILBOX
this option to build the drivers in drivers/mailbox as part of
SPL build.
config SPL_MMC_SUPPORT
config SPL_MMC
bool "Support MMC"
depends on MMC
select HAVE_BLOCK_DEVICE
@@ -721,7 +722,7 @@ config SYS_MMCSD_FS_BOOT_PARTITION
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
depends on SPL_MMC_SUPPORT
depends on SPL_MMC
help
Enable MMC framework tinification support. This option is useful if
if your SPL is extremely size constrained. Heed the warning, enable
@@ -737,12 +738,12 @@ config SPL_MMC_TINY
config SPL_MMC_WRITE
bool "MMC/SD/SDIO card support for write operations in SPL"
depends on SPL_MMC_SUPPORT
depends on SPL_MMC
help
Enable write access to MMC and SD Cards in SPL
config SPL_MPC8XXX_INIT_DDR_SUPPORT
config SPL_MPC8XXX_INIT_DDR
bool "Support MPC8XXX DDR init"
help
Enable support for DDR-SDRAM (double-data-rate synchronous dynamic
@@ -808,12 +809,6 @@ config SPL_UBI
README.ubispl for more info.
if SPL_DM
config SPL_CACHE
depends on CACHE
bool "Support cache drivers in SPL"
help
Enable support for cache drivers in SPL.
config SPL_DM_SPI
bool "Support SPI DM drivers in SPL"
help
@@ -916,7 +911,7 @@ config UBI_SPL_SILENCE_MSG
endif # if SPL_UBI
config SPL_NET_SUPPORT
config SPL_NET
bool "Support networking"
help
Enable support for network devices (such as Ethernet) in SPL.
@@ -925,7 +920,7 @@ config SPL_NET_SUPPORT
the network stack uses a number of environment variables. See also
SPL_ETH.
if SPL_NET_SUPPORT
if SPL_NET
config SPL_NET_VCI_STRING
string "BOOTP Vendor Class Identifier string sent by SPL"
help
@@ -934,7 +929,7 @@ config SPL_NET_VCI_STRING
of a client. This is often used in practice to allow for the DHCP
server to specify different files to load depending on if the ROM,
SPL or U-Boot itself makes the request
endif # if SPL_NET_SUPPORT
endif # if SPL_NET
config SPL_NO_CPU_SUPPORT
bool "Drop CPU code in SPL"
@@ -1004,7 +999,7 @@ config SPL_PCI
necessary driver support. This enables the drivers in drivers/pci
as part of an SPL build.
config SPL_PCH_SUPPORT
config SPL_PCH
bool "Support PCH drivers"
help
Enable support for PCH (Platform Controller Hub) devices in SPL.
@@ -1044,6 +1039,7 @@ config SPL_POWER
config SPL_POWER_DOMAIN
bool "Support power domain drivers"
select SPL_POWER
help
Enable support for power domain control in SPL. Many SoCs allow
power to be applied to or removed from portions of the SoC (power
@@ -1073,7 +1069,7 @@ config SPL_REMOTEPROC
Enable support for REMOTEPROCs in SPL. This permits to load
a remote processor firmware in SPL.
config SPL_RTC_SUPPORT
config SPL_RTC
bool "Support RTC drivers"
help
Enable RTC (Real-time Clock) support in SPL. This includes support
@@ -1082,7 +1078,7 @@ config SPL_RTC_SUPPORT
needed. This enables the drivers in drivers/rtc as part of an SPL
build.
config SPL_SATA_SUPPORT
config SPL_SATA
bool "Support loading from SATA"
help
Enable support for SATA (Serial AT attachment) in SPL. This allows
@@ -1094,7 +1090,7 @@ config SPL_SATA_SUPPORT
config SPL_SATA_RAW_U_BOOT_USE_SECTOR
bool "SATA raw mode: by sector"
depends on SPL_SATA_SUPPORT
depends on SPL_SATA
default y if ARCH_MVEBU
help
Use sector number for specifying U-Boot location on SATA disk in
@@ -1108,7 +1104,7 @@ config SPL_SATA_RAW_U_BOOT_SECTOR
Sector on the SATA disk to load U-Boot from, when the SATA disk is being
used in raw mode. Units: SATA disk sectors (1 sector = 512 bytes).
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
bool "Support serial"
select SPL_PRINTF
select SPL_STRTO
@@ -1119,7 +1115,7 @@ config SPL_SERIAL_SUPPORT
unless there are space reasons not to. Even then, consider
enabling SPL_USE_TINY_PRINTF which is a small printf() version.
config SPL_SPI_SUPPORT
config SPL_SPI
bool "Support SPI drivers"
help
Enable support for using SPI in SPL. This is used for connecting
@@ -1131,14 +1127,14 @@ config SPL_SPI_SUPPORT
config SPL_SPI_FLASH_SUPPORT
bool "Support SPI flash drivers"
depends on SPL_SPI_SUPPORT
depends on SPL_SPI
help
Enable support for using SPI flash in SPL, and loading U-Boot from
SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
the SPI bus that is used to connect it to a system. It is a simple
but fast bidirectional 4-wire bus (clock, chip select and two data
lines). This enables the drivers in drivers/mtd/spi as part of an
SPL build. This normally requires SPL_SPI_SUPPORT.
SPL build. This normally requires SPL_SPI.
if SPL_SPI_FLASH_SUPPORT
@@ -1221,13 +1217,14 @@ if SPL_USB_GADGET
config SPL_USB_ETHER
bool "Support USB Ethernet drivers"
depends on SPL_NET
help
Enable access to the USB network subsystem and associated
drivers in SPL. This permits SPL to load U-Boot over a
USB-connected Ethernet link (such as a USB Ethernet dongle) rather
than from an onboard peripheral. Environment support is required
since the network stack uses a number of environment variables.
See also SPL_NET_SUPPORT and SPL_ETH.
See also SPL_NET and SPL_ETH.
config SPL_DFU
bool "Support DFU (Device Firmware Upgrade)"
@@ -1258,7 +1255,7 @@ endchoice
config SPL_USB_SDP_SUPPORT
bool "Support SDP (Serial Download Protocol)"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
Enable Serial Download Protocol (SDP) device support in SPL. This
allows to download images into memory and execute (jump to) them
@@ -1284,7 +1281,7 @@ config SPL_WATCHDOG
config SPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable
@@ -1431,6 +1428,18 @@ config TPL_NEEDS_SEPARATE_STACK
Enable, if the TPL stage should not inherit its initial
stack-pointer from the settings for the SPL stage.
config TPL_POWER
bool "Support power drivers"
help
Enable support for power control in TPL. This includes support
for PMICs (Power-management Integrated Circuits) and some of the
features provided by PMICs. In particular, voltage regulators can
be used to enable/disable power and vary its voltage. That can be
useful in TPL to turn on boot peripherals and adjust CPU voltage
so that the clock speed can be increased. This enables the drivers
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an TPL build.
config TPL_TEXT_BASE
hex "Base address for the .text section of the TPL stage"
depends on TPL_NEEDS_SEPARATE_TEXT_BASE
@@ -1515,17 +1524,17 @@ config TPL_LIBGENERIC_SUPPORT
Enable support for generic U-Boot libraries within TPL. See
SPL_LIBGENERIC_SUPPORT for details.
config TPL_MPC8XXX_INIT_DDR_SUPPORT
config TPL_MPC8XXX_INIT_DDR
bool "Support MPC8XXX DDR init"
help
Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See
SPL_MPC8XXX_INIT_DDR_SUPPORT for details.
SPL_MPC8XXX_INIT_DDR for details.
config TPL_MMC_SUPPORT
config TPL_MMC
bool "Support MMC"
depends on MMC
help
Enable support for MMC within TPL. See SPL_MMC_SUPPORT for details.
Enable support for MMC within TPL. See SPL_MMC for details.
config TPL_NAND_SUPPORT
bool "Support NAND flash"
@@ -1540,7 +1549,7 @@ config TPL_PCI
necessary driver support. This enables the drivers in drivers/pci
as part of a TPL build.
config TPL_PCH_SUPPORT
config TPL_PCH
bool "Support PCH drivers"
help
Enable support for PCH (Platform Controller Hub) devices in TPL.
@@ -1562,7 +1571,7 @@ config TPL_RAM_DEVICE
be already in memory when TPL takes over, e.g. loaded by the boot
ROM.
config TPL_RTC_SUPPORT
config TPL_RTC
bool "Support RTC drivers"
help
Enable RTC (Real-time Clock) support in TPL. This includes support
@@ -1571,12 +1580,12 @@ config TPL_RTC_SUPPORT
needed. This enables the drivers in drivers/rtc as part of an TPL
build.
config TPL_SERIAL_SUPPORT
config TPL_SERIAL
bool "Support serial"
select TPL_PRINTF
select TPL_STRTO
help
Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for
Enable support for serial in TPL. See SPL_SERIAL for
details.
config TPL_SPI_FLASH_SUPPORT
@@ -1602,10 +1611,10 @@ config TPL_SPI_LOAD
Enable support for loading next stage, U-Boot or otherwise, from
SPI NOR in U-Boot TPL.
config TPL_SPI_SUPPORT
config TPL_SPI
bool "Support SPI drivers"
help
Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for
Enable support for using SPI in TPL. See SPL_SPI for
details.
config TPL_DM_SPI
@@ -1620,7 +1629,7 @@ config TPL_DM_SPI_FLASH
config TPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on TPL_SERIAL_SUPPORT
depends on TPL_SERIAL
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable

6
common/spl/Makefile
View File

@@ -19,15 +19,15 @@ obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o
obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o
endif
obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o
obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)NET) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o
obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o

4
common/spl/spl.c
View File

@@ -623,7 +623,7 @@ static int boot_from_devices(struct spl_image_info *spl_image,
if (CONFIG_IS_ENABLED(SHOW_ERRORS))
ret = -ENXIO;
loader = spl_ll_find_loader(bootdev);
if (CONFIG_IS_ENABLED(SERIAL_SUPPORT) &&
if (CONFIG_IS_ENABLED(SERIAL) &&
CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) &&
!IS_ENABLED(CONFIG_SILENT_CONSOLE)) {
if (loader)
@@ -821,7 +821,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
*/
void preloader_console_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
gd->baudrate = CONFIG_BAUDRATE;
serial_init(); /* serial communications setup */

6
configs/P1010RDB-PA_36BIT_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -30,9 +30,9 @@ CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PA_36BIT_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -27,7 +27,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
View File

@@ -8,11 +8,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_PHYS_64BIT=y
@@ -29,7 +29,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PA_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -29,9 +29,9 @@ CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PA_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -26,7 +26,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PA_SPIFLASH_defconfig
View File

@@ -8,11 +8,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_FIT=y
@@ -28,7 +28,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_36BIT_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -31,9 +31,9 @@ CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_36BIT_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -28,7 +28,7 @@ CONFIG_ID_EEPROM=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
View File

@@ -8,11 +8,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_PHYS_64BIT=y
@@ -30,7 +30,7 @@ CONFIG_ID_EEPROM=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -30,9 +30,9 @@ CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -27,7 +27,7 @@ CONFIG_ID_EEPROM=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1010RDB-PB_SPIFLASH_defconfig
View File

@@ -8,11 +8,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_FIT=y
@@ -29,7 +29,7 @@ CONFIG_ID_EEPROM=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

6
configs/P1020RDB-PC_36BIT_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@@ -29,9 +29,9 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PC_36BIT_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
@@ -27,7 +27,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
View File

@@ -8,10 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
@@ -29,7 +29,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PC_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@@ -28,9 +28,9 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PC_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
@@ -26,7 +26,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PC_SPIFLASH_defconfig
View File

@@ -8,10 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
@@ -28,7 +28,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PD_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@@ -28,9 +28,9 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PD_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
@@ -26,7 +26,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P1020RDB-PD_SPIFLASH_defconfig
View File

@@ -8,10 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y
@@ -28,7 +28,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_36BIT_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@@ -29,9 +29,9 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_36BIT_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
@@ -27,7 +27,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
View File

@@ -8,10 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
@@ -29,7 +29,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_NAND_defconfig
View File

@@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@@ -28,9 +28,9 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x0
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
@@ -26,7 +26,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

6
configs/P2020RDB-PC_SPIFLASH_defconfig
View File

@@ -8,10 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
@@ -28,7 +28,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

4
configs/T1024RDB_NAND_defconfig
View File

@@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -34,7 +34,7 @@ CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y

6
configs/T1024RDB_SDCARD_defconfig
View File

@@ -9,8 +9,8 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -34,7 +34,7 @@ CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

6
configs/T1024RDB_SPIFLASH_defconfig
View File

@@ -10,11 +10,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1024RDB=y
CONFIG_FIT=y
@@ -36,7 +36,7 @@ CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

4
configs/T1042D4RDB_NAND_defconfig
View File

@@ -6,7 +6,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x180000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -30,7 +30,7 @@ CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y

6
configs/T1042D4RDB_SDCARD_defconfig
View File

@@ -6,8 +6,8 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -30,7 +30,7 @@ CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

6
configs/T1042D4RDB_SPIFLASH_defconfig
View File

@@ -7,11 +7,11 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_FIT=y
@@ -32,7 +32,7 @@ CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

4
configs/T2080QDS_NAND_defconfig
View File

@@ -7,7 +7,7 @@ CONFIG_ENV_OFFSET=0x140000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -28,7 +28,7 @@ CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y

6
configs/T2080QDS_SDCARD_defconfig
View File

@@ -7,8 +7,8 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
@@ -28,7 +28,7 @@ CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

6
configs/T2080QDS_SPIFLASH_defconfig
View File

@@ -8,11 +8,11 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
@@ -30,7 +30,7 @@ CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y

Some files were not shown because too many files have changed in this diff Show More