Add kernel arch/arm generated headers for out-of-tree module builds

These generated files (asm wrappers, asm-offsets.s, .version) are required
by make M=<dir> modules when building ttymzdrv/z80drv on the VPS where
the kernel hasn't been compiled locally.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

CPLD/v1.0/PCW8256/build/tzpuFusionX_PCW8256.qpf

@@ -0,0 +1,30 @@
+# -------------------------------------------------------------------------- #
+#
+# Copyright (C) 1991-2013 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions 
+# and other software and tools, and its AMPP partner logic 
+# functions, and any output files from any of the foregoing 
+# (including device programming or simulation files), and any 
+# associated documentation or information are expressly subject 
+# to the terms and conditions of the Altera Program License 
+# Subscription Agreement, Altera MegaCore Function License 
+# Agreement, or other applicable license agreement, including, 
+# without limitation, that your use is for the sole purpose of 
+# programming logic devices manufactured by Altera and sold by 
+# Altera or its authorized distributors.  Please refer to the 
+# applicable agreement for further details.
+#
+# -------------------------------------------------------------------------- #
+#
+# Quartus II 64-Bit
+# Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
+# Date created = 16:29:32  June 24, 2020
+#
+# -------------------------------------------------------------------------- #
+
+QUARTUS_VERSION = "13.0"
+DATE = "16:29:32  September 10, 2021"
+
+# Revisions
+
+PROJECT_REVISION = "tzpuFusionX_PCW8256"

CPLD/v1.0/PCW8256/build/tzpuFusionX_PCW8256.qsf

@@ -0,0 +1,243 @@
+# -------------------------------------------------------------------------- #
+#
+# Copyright (C) 1991-2013 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions 
+# and other software and tools, and its AMPP partner logic 
+# functions, and any output files from any of the foregoing 
+# (including device programming or simulation files), and any 
+# associated documentation or information are expressly subject 
+# to the terms and conditions of the Altera Program License 
+# Subscription Agreement, Altera MegaCore Function License 
+# Agreement, or other applicable license agreement, including, 
+# without limitation, that your use is for the sole purpose of 
+# programming logic devices manufactured by Altera and sold by 
+# Altera or its authorized distributors.  Please refer to the 
+# applicable agreement for further details.
+#
+# -------------------------------------------------------------------------- #
+#
+# Quartus II 64-Bit
+# Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
+# Date created = 16:29:32  June 24, 2020
+#
+# -------------------------------------------------------------------------- #
+#
+# Notes:
+#
+# 1) The default values for assignments are stored in the file:
+#		tzpuFusionX.qdf
+#    If this file doesn't exist, see file:
+#		assignment_defaults.qdf
+#
+# 2) Altera recommends that you do not modify this file. This
+#    file is updated automatically by the Quartus II software
+#    and any changes you make may be lost or overwritten.
+#
+# -------------------------------------------------------------------------- #
+
+
+set_global_assignment -name FAMILY MAX7000AE
+set_global_assignment -name DEVICE "EPM7512AETC144-10"
+set_global_assignment -name TOP_LEVEL_ENTITY tzpuFusionX_PCW8256
+set_global_assignment -name ORIGINAL_QUARTUS_VERSION "13.0 SP1"
+set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:29:32  JUNE 24, 2020"
+set_global_assignment -name LAST_QUARTUS_VERSION "13.0 SP1"
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR "-1"
+set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
+set_global_assignment -name EDA_INPUT_VCC_NAME VCC -section_id eda_design_synthesis
+set_global_assignment -name EDA_INPUT_DATA_FORMAT EDIF -section_id eda_design_synthesis
+set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)"
+set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation
+set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
+set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING OFF
+set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
+set_global_assignment -name MAX7000_DEVICE_IO_STANDARD LVTTL
+
+# Z80 Data Bus
+# ============
+set_location_assignment PIN_81 -to Z80_DATA[0]
+set_location_assignment PIN_78 -to Z80_DATA[1]
+set_location_assignment PIN_87 -to Z80_DATA[2]
+set_location_assignment PIN_100 -to Z80_DATA[3]
+set_location_assignment PIN_102 -to Z80_DATA[4]
+set_location_assignment PIN_93 -to Z80_DATA[5]
+set_location_assignment PIN_94 -to Z80_DATA[6]
+set_location_assignment PIN_84 -to Z80_DATA[7]
+
+# Z80 Control signals.
+# ====================
+set_location_assignment PIN_69 -to Z80_INTn
+set_location_assignment PIN_70 -to Z80_NMIn
+set_location_assignment PIN_71 -to Z80_HALTn
+set_location_assignment PIN_68 -to Z80_MREQn
+set_location_assignment PIN_65 -to Z80_IORQn
+set_location_assignment PIN_67 -to Z80_RDn
+set_location_assignment PIN_66 -to Z80_WRn
+set_location_assignment PIN_63 -to Z80_BUSAKn
+set_location_assignment PIN_62 -to Z80_WAITn
+set_location_assignment PIN_61 -to Z80_BUSRQn
+set_location_assignment PIN_79 -to Z80_RFSHn
+set_location_assignment PIN_60 -to Z80_M1n
+set_location_assignment PIN_56 -to Z80_RESETn
+set_location_assignment PIN_101 -to Z80_CLK
+
+# Z80 Address Bus
+# ===============
+set_location_assignment PIN_80 -to Z80_ADDR[0]
+set_location_assignment PIN_90 -to Z80_ADDR[1]
+set_location_assignment PIN_83 -to Z80_ADDR[2]
+set_location_assignment PIN_86 -to Z80_ADDR[3]
+set_location_assignment PIN_88 -to Z80_ADDR[4]
+set_location_assignment PIN_91 -to Z80_ADDR[5]
+set_location_assignment PIN_92 -to Z80_ADDR[6]
+set_location_assignment PIN_96 -to Z80_ADDR[7]
+set_location_assignment PIN_97 -to Z80_ADDR[8]
+set_location_assignment PIN_98 -to Z80_ADDR[9]
+set_location_assignment PIN_99 -to Z80_ADDR[10]
+set_location_assignment PIN_110 -to Z80_ADDR[11]
+set_location_assignment PIN_108 -to Z80_ADDR[12]
+set_location_assignment PIN_107 -to Z80_ADDR[13]
+set_location_assignment PIN_106 -to Z80_ADDR[14]
+set_location_assignment PIN_103 -to Z80_ADDR[15]
+
+# SOM SPI
+# =======
+set_location_assignment PIN_32 -to VSOM_SPI_CSn
+set_location_assignment PIN_31 -to VSOM_SPI_CLK
+set_location_assignment PIN_30 -to VSOM_SPI_MOSI
+set_location_assignment PIN_29 -to VSOM_SPI_MISO
+
+# SOM Parallel Bus
+# ================
+set_location_assignment PIN_41 -to VSOM_DATA_OUT[0]
+set_location_assignment PIN_40 -to VSOM_DATA_OUT[1]
+set_location_assignment PIN_39 -to VSOM_DATA_OUT[2]
+set_location_assignment PIN_38 -to VSOM_DATA_OUT[3]
+set_location_assignment PIN_37 -to VSOM_DATA_OUT[4]
+set_location_assignment PIN_36 -to VSOM_DATA_OUT[5]
+set_location_assignment PIN_35 -to VSOM_DATA_OUT[6]
+set_location_assignment PIN_34 -to VSOM_DATA_OUT[7]
+set_location_assignment PIN_132 -to VSOM_HBYTE
+
+# SOM Reserved signals.
+# =====================
+set_location_assignment PIN_21 -to VSOM_RSV[1]
+
+# SOM Control Signals
+# ===================
+set_location_assignment PIN_28 -to VSOM_READY
+set_location_assignment PIN_19 -to VSOM_LTSTATE
+set_location_assignment PIN_27 -to VSOM_BUSRQ
+set_location_assignment PIN_26 -to VSOM_BUSACK
+set_location_assignment PIN_18 -to VSOM_INT
+set_location_assignment PIN_22 -to VSOM_NMI
+set_location_assignment PIN_25 -to VSOM_WAIT
+set_location_assignment PIN_23 -to VSOM_RESET
+set_location_assignment PIN_16 -to PM_RESET
+
+# VGA_Palette Control
+# ===================
+set_location_assignment PIN_133 -to VGA_R[7]
+set_location_assignment PIN_137 -to VGA_R[8]
+set_location_assignment PIN_140 -to VGA_R[9]
+set_location_assignment PIN_134 -to VGA_G[7]
+set_location_assignment PIN_138 -to VGA_G[8]
+set_location_assignment PIN_141 -to VGA_G[9]
+set_location_assignment PIN_136 -to VGA_B[8]
+set_location_assignment PIN_139 -to VGA_B[9]
+
+
+# VGA Control Signals
+# ===================
+set_location_assignment PIN_142 -to VGA_PXL_CLK
+set_location_assignment PIN_14 -to VGA_DISPEN
+set_location_assignment PIN_12 -to VGA_VSYNCn
+set_location_assignment PIN_11 -to VGA_HSYNCn
+set_location_assignment PIN_82 -to VGA_COLR
+set_location_assignment PIN_109 -to VGA_CSYNCn
+set_location_assignment PIN_143 -to VGA_BLANKn
+
+# CRT Control Signals
+# ===================
+set_location_assignment PIN_15 -to MONO_PXL_CLK
+set_location_assignment PIN_114 -to MONO_BLANKn
+set_location_assignment PIN_113 -to MONO_CSYNCn
+set_location_assignment PIN_116 -to MONO_RSV
+
+# CRT Lower Chrominance Control
+# =============================
+set_location_assignment PIN_1 -to MONO_R[0]
+set_location_assignment PIN_6 -to MONO_R[1]
+set_location_assignment PIN_10 -to MONO_R[2]
+set_location_assignment PIN_2 -to MONO_G[0]
+set_location_assignment PIN_7 -to MONO_G[1]
+set_location_assignment PIN_9 -to MONO_G[2]
+set_location_assignment PIN_5 -to MONO_B[1]
+set_location_assignment PIN_8 -to MONO_B[2]
+
+# MUX Control Signals
+# ===================
+set_location_assignment PIN_72 -to VIDEO_SRC
+set_location_assignment PIN_74 -to MONO_VIDEO_SRC
+set_location_assignment PIN_77 -to AUDIO_SRC_L
+set_location_assignment PIN_75 -to AUDIO_SRC_R
+
+# Mainboard Reset Signals
+# =======================
+#set_location_assignment PIN_127 -to CPU_RESETn
+set_location_assignment PIN_122 -to MB_RESETn
+set_location_assignment PIN_111 -to MB_IPLn
+
+# USB Power Control
+# =================
+set_location_assignment PIN_55 -to VBUS_EN
+
+# Clocks
+# ======
+#set_location_assignment PIN_125 -to CPU_CLK
+set_location_assignment PIN_128 -to CLK_50M
+
+# Unused ports
+# ============
+#set_location_assignment PIN_42  -to 
+#set_location_assignment PIN_43  -to 
+#set_location_assignment PIN_44  -to 
+#set_location_assignment PIN_45  -to 
+#set_location_assignment PIN_112 -to 
+#set_location_assignment PIN_131 -to 
+#set_location_assignment PIN_117 -to 
+#set_location_assignment PIN_118 -to 
+#set_location_assignment PIN_119 -to 
+#set_location_assignment PIN_120 -to 
+#set_location_assignment PIN_121 -to 
+#set_location_assignment PIN_25  -to 
+#set_location_assignment PIN_53  -to 
+#set_location_assignment PIN_128 -to 
+#set_location_assignment PIN_47  -to 
+#set_location_assignment PIN_54  -to 
+#set_location_assignment PIN_127 -to 
+#set_location_assignment PIN_125 -to 
+#set_location_assignment PIN_48  -to 
+#set_location_assignment PIN_46  -to 
+#set_location_assignment PIN_49  -to 
+
+
+set_global_assignment -name VHDL_FILE ../tzpuFusionX_Toplevel.vhd
+set_global_assignment -name VHDL_FILE ../tzpuFusionX_pkg.vhd
+set_global_assignment -name VHDL_FILE ../tzpuFusionX.vhd
+set_global_assignment -name SDC_FILE tzpuFusionX_PCW8256_constraints.sdc
+
+set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008
+set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
+
+set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS OFF
+set_global_assignment -name MAX7000_OPTIMIZATION_TECHNIQUE AREA
+set_global_assignment -name AUTO_RESOURCE_SHARING OFF
+set_global_assignment -name PRE_MAPPING_RESYNTHESIS OFF
+set_global_assignment -name USE_LOGICLOCK_CONSTRAINTS_IN_BALANCING OFF
+
+set_global_assignment -name INFER_RAMS_FROM_RAW_LOGIC OFF
+set_global_assignment -name AUTO_LCELL_INSERTION ON
+
+set_global_assignment -name CDF_FILE output_files/tzpuFusionX_PCW8256.cdf

CPLD/v1.0/PCW8256/build/tzpuFusionX_PCW8256_constraints.sdc

@@ -0,0 +1,324 @@
+## Generated SDC file "tzpuFusionX.out.sdc"
+
+## Copyright (C) 1991-2013 Altera Corporation
+## Your use of Altera Corporation's design tools, logic functions 
+## and other software and tools, and its AMPP partner logic 
+## functions, and any output files from any of the foregoing 
+## (including device programming or simulation files), and any 
+## associated documentation or information are expressly subject 
+## to the terms and conditions of the Altera Program License 
+## Subscription Agreement, Altera MegaCore Function License 
+## Agreement, or other applicable license agreement, including, 
+## without limitation, that your use is for the sole purpose of 
+## programming logic devices manufactured by Altera and sold by 
+## Altera or its authorized distributors.  Please refer to the 
+## applicable agreement for further details.
+
+
+## VENDOR  "Altera"
+## PROGRAM "Quartus II"
+## VERSION "Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition"
+
+## DATE    "Fri Jun 26 22:10:05 2020"
+
+##
+## DEVICE  "EPM7160STC100-10"
+##
+
+
+#**************************************************************
+# Time Information
+#**************************************************************
+
+set_time_format -unit ns -decimal_places 3
+
+
+
+#**************************************************************
+# Create Clock
+#**************************************************************
+
+# Standard mainboard clock. If using tzpuFusionX on a different host then set to the host frequency.
+create_clock -name {Z80_CLK} -period 250.000 -waveform { 0.000 125.000 } [get_ports { Z80_CLK }]
+
+# For 50MHz crystal.
+create_clock -name {CLK_50M} -period 20.000 -waveform { 0.000 10.000 }   [ get_ports { CLK_50M }]
+
+# For SPI CSn
+#create_clock -name {VSOM_SPI_CSn} -period 200.000 -waveform { 160.000 40.000 }   [ get_ports { VSOM_SPI_CSn }]
+
+# For SPI CLK
+create_clock -name {VSOM_SPI_CLK} -period 14.000 -waveform { 0.000 7.000 }   [ get_ports { VSOM_SPI_CLK }]
+
+# For basic board with oscillator.
+#create_clock -name {CTLCLK} -period 20.000 -waveform { 0.000 10.000 }   [ get_ports { CTLCLK }]
+#create_clock -name {cpld512:cpldl512Toplevel|CTLCLKi} -period 280.000 -waveform { 0.000 140.000 } [ get_keepers {cpld512:cpldl512Toplevel|CTLCLKi} ]
+##create_clock -name {Z80_CLK} -period 50.000 -waveform { 0.000 25.000 } [get_ports { CTLCLK }]
+
+
+#**************************************************************
+# Create Generated Clock
+#**************************************************************
+
+
+
+#**************************************************************
+# Set Clock Latency
+#**************************************************************
+
+
+
+#**************************************************************
+# Set Clock Uncertainty
+#**************************************************************
+
+#derive_clock_uncertainty
+
+
+
+#**************************************************************
+# Set Input Delay
+#**************************************************************
+
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {CTL_MBSEL}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {CTL_BUSRQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {CTL_WAITn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {SYS_BUSRQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {SYS_WAITn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_ADDR[*]}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_HI_ADDR[*]}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {VZ80_ADDR[*]}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_BUSACKn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_DATA[*]}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_HALTn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_IORQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_M1n}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_MREQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_RESETn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_RFSHn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_WRn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {Z80_RDn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {R_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {G_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {B_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {COLR_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {CSYNC_IN}]
+##set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {CVIDEO_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {HSYNC_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {VSYNC_IN}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  1.000 [get_ports {VZ80_DATA[*]}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_MREQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_IORQn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_WRn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_RDn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_M1n}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_BUSACKn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_INTn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_NMIn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_WAITn}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VWAITn_A21_V_CSYNC}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A20_RFSHn_V_HSYNC}]
+#set_input_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A19_HALTn_V_VSYNC}]
+
+#**************************************************************
+# Set Output Delay
+#**************************************************************
+
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {CTL_BUSACKn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {CTL_HALTn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {CTL_M1n}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {CTL_RFSHn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {RAM_CSn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {RAM_CS2n}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {RAM_OEn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {RAM_WEn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {SVCREQn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {SYS_BUSACKn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_BUSRQn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_DATA[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_ADDR[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_HI_ADDR[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_RA_ADDR[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_WAITn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_MREQn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_CLK}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_ADDR[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_DATA[*]}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_CLK}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_MREQn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_IORQn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_RDn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_WRn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_M1n}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VIDEO_RDn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VIDEO_WRn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A18_INTn_V_R}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_BUSRQn_V_G}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A16_WAITn_V_B}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A17_NMIn_V_COLR}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VWAITn_A21_V_CSYNC}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A20_RFSHn_V_HSYNC}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {VZ80_A19_HALTn_V_VSYNC}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_HALTn}]
+#set_output_delay -add_delay  -clock [get_clocks {SYSCLK}]  5.000 [get_ports {Z80_RFSHn}]
+
+# For K64F
+#set_output_delay -add_delay  -clock [get_clocks {CTLCLK}]  5.000 [get_ports {Z80_CLK}]
+
+# For basic board with oscillator.
+#set_output_delay -add_delay  -clock [get_clocks {cpld512:cpldl512Toplevel|CTLCLKi}]  5.000 [get_ports {Z80_CLK}]
+
+#**************************************************************
+# Set Max Delay
+#**************************************************************
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_HALTn} 30.000
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_IORQn} 30.000
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_M1n}   30.000
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_RDn}   30.000
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_WRn}   30.000
+#set_max_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_RFSHn} 30.000
+#set_max_delay -from [get_ports {VZ80_A19_HALTn_V_VSYNC}]        -to {Z80_HALTn} 30.000
+#set_max_delay -from [get_ports {VZ80_IORQn}]                    -to {Z80_IORQn} 30.000
+#set_max_delay -from [get_ports {VZ80_MREQn}]                    -to {Z80_IORQn} 30.000
+#set_max_delay -from [get_ports {VZ80_M1n}]                      -to {Z80_M1n}   30.000
+#set_max_delay -from [get_ports {VZ80_RDn}]                      -to {Z80_RDn}   30.000
+#set_max_delay -from [get_ports {VZ80_WRn}]                      -to {Z80_WRn}   30.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_HALTn} 40.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_RFSHn} 40.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_IORQn} 40.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_M1n}   30.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_RDn}   30.000
+#set_max_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_WRn}   30.000
+#set_max_delay -from [get_ports {VZ80_A20_RFSHn_V_HSYNC}]        -to {Z80_RFSHn} 30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_HALTn} 30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_IORQn} 30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_M1n}   30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_RDn}   30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_WRn}   30.000
+#set_max_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_RFSHn} 30.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_HALTn}]   45.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_IORQn}]   30.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_M1n}]     30.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_RDn}]     30.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_RFSHn}]   45.000
+#set_max_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_WRn}]     30.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_HALTn}]   45.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_IORQn}]   50.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_M1n}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_RDn}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_WRn}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_RFSHn}]   45.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_HALTn}]   60.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_IORQn}]   45.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_M1n}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_RDn}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_WRn}]     40.000
+#set_max_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_RFSHn}]   60.000
+
+#**************************************************************
+# Set Min Delay
+#**************************************************************
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_HALTn} 1.000
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_IORQn} 1.000
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_M1n}   1.000
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_RDn}   1.000
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_WRn}   1.000
+#set_min_delay -from [get_ports {CTL_BUSRQn}]                    -to {Z80_RFSHn} 1.000
+#set_min_delay -from [get_ports {VZ80_A19_HALTn_V_VSYNC}]        -to {Z80_HALTn} 1.000
+#set_min_delay -from [get_ports {VZ80_IORQn}]                    -to {Z80_IORQn} 1.000
+#set_min_delay -from [get_ports {VZ80_MREQn}]                    -to {Z80_IORQn} 1.000
+#set_min_delay -from [get_ports {VZ80_M1n}]                      -to {Z80_M1n}   1.000
+#set_min_delay -from [get_ports {VZ80_RDn}]                      -to {Z80_RDn}   1.000
+#set_min_delay -from [get_ports {VZ80_WRn}]                      -to {Z80_WRn}   1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_HALTn} 1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_RFSHn} 1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_IORQn} 1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_M1n}   1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_RDn}   1.000
+#set_min_delay -from [get_ports {VZ80_BUSACKn}]                  -to {Z80_WRn}   1.000
+#set_min_delay -from [get_ports {VZ80_A20_RFSHn_V_HSYNC}]        -to {Z80_RFSHn} 1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_HALTn} 1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_IORQn} 1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_M1n}   1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_RDn}   1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_WRn}   1.000
+#set_min_delay -from [get_ports {Z80_BUSACKn}]                   -to {Z80_RFSHn} 1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_HALTn}] 1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_IORQn}] 1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_M1n}]   1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_RDn}]   1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_RFSHn}] 1.000
+#set_min_delay -from {Z80_BUSACKn}                               -to [get_ports {Z80_WRn}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_HALTn}] 1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_IORQn}] 1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_M1n}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_RDn}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_WRn}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]} -to [get_ports {Z80_RFSHn}] 1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_HALTn}] 1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_IORQn}] 1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_M1n}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_RDn}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_WRn}]   1.000
+#set_min_delay -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}  -to [get_ports {Z80_RFSHn}] 1.000
+
+
+
+#**************************************************************
+# Set Clock Groups
+#**************************************************************
+
+
+
+#**************************************************************
+# Set False Path
+#**************************************************************
+
+# For K64F
+#set_false_path -from [get_clocks {CTLCLK}] -to [get_clocks {SYSCLK}]
+#set_false_path -from [get_clocks {SYSCLK}] -to [get_clocks {CTLCLK}]
+
+# For basic board with oscillator.
+#set_false_path -from [get_clocks {cpld512:cpldl512Toplevel|CTLCLKi}] -to [get_clocks {SYSCLK}]
+#set_false_path -from [get_clocks {cpld512:cpldl512Toplevel|CTLCLKi}] -to [get_clocks {CTLCLK}]
+#set_false_path -from [get_clocks {SYSCLK}] -to [get_clocks {cpld512:cpldl512Toplevel|CTLCLKi}]
+#set_false_path -from [get_clocks {SYSCLK}] -to [get_clocks {CTLCLK}]
+
+# For both configurations.
+#set_false_path -from {cpld512:cpldl512Toplevel|KEY_SUBSTITUTE}    -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|MEM_MODE_LATCH[*]}  -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]}    -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|CPLD_CFG_DATA[*]}   -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|MZ80B_VRAM_HI_ADDR} -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|MZ80B_VRAM_LO_ADDR} -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|MODE_VIDEO_MZ80B}   -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+#set_false_path -from {cpld512:cpldl512Toplevel|GRAM_PAGE_ENABLE}   -to {cpld512:cpldl512Toplevel|CTLCLK_Q}
+
+#**************************************************************
+# Set Multicycle Path
+#**************************************************************
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CTL_BUSRQni} -to {cpld512:cpldl512Toplevel|CTLCLK_Q} -setup -end 2
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CTL_BUSRQni} -to {cpld512:cpldl512Toplevel|CTLCLK_Q} -hold -end 1
+
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CTL_BUSRQni} -to {cpld512:cpldl512Toplevel|MEM_MODE_LATCH[*]} -setup -end 2
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CTL_BUSRQni} -to {cpld512:cpldl512Toplevel|MEM_MODE_LATCH[*]} -hold -end 1
+
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]} -to {cpld512:cpldl512Toplevel|MEM_MODE_LATCH[*]} -setup -end 2
+#set_multicycle_path -from {cpld512:cpldl512Toplevel|CPU_CFG_DATA[*]} -to {cpld512:cpldl512Toplevel|MEM_MODE_LATCH[*]} -hold -end 1
+
+#**************************************************************
+# Set Maximum Delay
+#**************************************************************
+
+
+
+#**************************************************************
+# Set Minimum Delay
+#**************************************************************
+
+
+
+#**************************************************************
+# Set Input Transition
+#**************************************************************
+

software/FusionX/src/spitools/Makefile

@@ -42,8 +42,8 @@ ARCH := arm
 
 #Compilers
 ifeq ($(ARCH),arm)
-CPP := /opt/gcc-arm-eabihf/bin/arm-linux-gnueabihf-g++
-CC := /opt/gcc-arm-eabihf/bin/arm-linux-gnueabihf-gcc
+CPP := arm-linux-gnueabihf-g++
+CC := arm-linux-gnueabihf-gcc
 else
 CPP := g++
 CC := gcc

software/FusionX/src/ttymz/Makefile

@@ -10,7 +10,7 @@ FUSIONX        := $(PWD)/../..
 CROSS          := arm-linux-gnueabihf-
 CTRLINC        = -IZeta/API -IZ80/API -DTARGET_HOST_$(MODEL)=1
 
-ccflags-y      = -O2 -I${KERNEL}/drivers/sstar/include -I${KERNEL}/drivers/sstar/include/infinity2m -I${KERNEL}/drivers/sstar/gpio/infinity2m -D__KERNEL_DRIVER__ -DTARGET_HOST_$(MODEL)=1
+ccflags-y      = -O2 -I${KERNEL}/drivers/sstar/include -I${KERNEL}/drivers/sstar/include/infinity2m -I${KERNEL}/drivers/sstar/gpio/infinity2m -D__KERNEL_DRIVER__ -DTARGET_HOST_$(MODEL)=1 -Wno-error
 ifeq ($(DEBUG),y)
 ccflags-y      += -DTTYMZ_DEBUG
 endif

software/FusionX/src/ttymz/sharpmz.c

@@ -2455,17 +2455,34 @@ static t_ansiKeyMap ansiKeySeq[] = {
 #endif     
 
     // Set the module control structures to default values according to build target.
-    static t_displayBuffer display        = displayDefault;
-    static t_keyboard      keyboard       = keyboardDefault;
-    static t_audio         audio          = audioDefault;
-    static t_AnsiTerm      ansiterm       = ansitermDefault;
-    static t_control       ctrl           = ctrlDefault;
+    // NB: Cannot use const locals as initializers for static variables in C (not compile-time constants).
+    // Defaults are applied at runtime in sharpmz_init_defaults().
+    static t_displayBuffer display;
+    static t_keyboard      keyboard;
+    static t_audio         audio;
+    static t_AnsiTerm      ansiterm;
+    static t_control       ctrl;
+    static int             defaultsInitialised = 0;
 
 
 // --------------------------------------------------------------------------------------------------------------
 // Methods
 // --------------------------------------------------------------------------------------------------------------
 
+// Initialise the static control structures with default values.
+// Called once from the module init path before any hardware access.
+void sharpmz_init_defaults(void)
+{
+    if (!defaultsInitialised) {
+        display  = displayDefault;
+        keyboard = keyboardDefault;
+        audio    = audioDefault;
+        ansiterm = ansitermDefault;
+        ctrl     = ctrlDefault;
+        defaultsInitialised = 1;
+    }
+}
+
 // Method to configure the motherboard hardware after a reset.
 //
 uint8_t mzInitMBHardware(void)

software/FusionX/src/ttymz/sharpmz.h

@@ -556,6 +556,7 @@ typedef struct {
 
 // Prototypes.
 //
+void                                 sharpmz_init_defaults(void);
 uint8_t                              mzInitMBHardware(void);
 uint8_t                              mzInit(void);
 void                                 mzBeep(uint32_t, uint32_t);

software/FusionX/src/ttymz/ttymz.c

@@ -823,6 +823,9 @@ static int __init ttymz_init(void)
     int  i;
     char buf[80];
 
+    // Initialise the sharpmz module control structures with default values.
+    sharpmz_init_defaults();
+
     // Allocate the tty driver handles, one per potential device.
     ttymzCtrl.ttymzDriver = alloc_tty_driver(SHARPMZ_TTY_MINORS);
     if(!ttymzCtrl.ttymzDriver)

software/linux/Build_FusionX.sh

@@ -190,7 +190,7 @@ else
 fi
 
 cd ${RELEASEDIR}/project
-make clean;make image-nocheck
+make clean;make image-nocheck || echo "WARNING: make image-nocheck had errors (non-fatal, SD rootfs build continues)"
 
 # Save the rootfs before copying latest release.
 if [ -f ${RELEASEDIR}/project/image/rootfs/rootfs ]; then
@@ -326,9 +326,9 @@ tar -cf ${RELEASEDIR}/project/image/output/images/sdrootfs.tar.gz *
 echo "Building Upgrade image in project/image/output/images/ - "
 cd ${RELEASEDIR}/project/
 echo -n "SigmastarUpgradeSD.bin "
-yes | ./make_sd_upgrade_sigmastar.sh
+yes | ./make_sd_upgrade_sigmastar.sh || echo "(incomplete - flash images not fully generated)"
 echo -n "SigmastarUpgrade.bin "
-yes | ./make_usb_upgrade_sigmastar.sh
+yes | ./make_usb_upgrade_sigmastar.sh || echo "(incomplete - flash images not fully generated)"
 echo ""
 
 echo "Copy image to SD card or USB drive, install and reboot FusionX to upgrade."

software/linux/kernel/.version

@@ -0,0 +1 @@
+23

software/linux/kernel/arch/arm/include/generated/asm/bitsperlong.h

@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>

software/linux/kernel/arch/arm/include/generated/asm/clkdev.h

@@ -0,0 +1 @@
+#include <asm-generic/clkdev.h>

software/linux/kernel/arch/arm/include/generated/asm/cputime.h

@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>

software/linux/kernel/arch/arm/include/generated/asm/current.h

@@ -0,0 +1 @@
+#include <asm-generic/current.h>

software/linux/kernel/arch/arm/include/generated/asm/early_ioremap.h

@@ -0,0 +1 @@
+#include <asm-generic/early_ioremap.h>

software/linux/kernel/arch/arm/include/generated/asm/emergency-restart.h

@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>

software/linux/kernel/arch/arm/include/generated/asm/errno.h

@@ -0,0 +1 @@
+#include <asm-generic/errno.h>

software/linux/kernel/arch/arm/include/generated/asm/exec.h

@@ -0,0 +1 @@
+#include <asm-generic/exec.h>

software/linux/kernel/arch/arm/include/generated/asm/ioctl.h

@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>

software/linux/kernel/arch/arm/include/generated/asm/ipcbuf.h

@@ -0,0 +1 @@
+#include <asm-generic/ipcbuf.h>

software/linux/kernel/arch/arm/include/generated/asm/irq_regs.h

@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>

software/linux/kernel/arch/arm/include/generated/asm/kdebug.h

@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>

software/linux/kernel/arch/arm/include/generated/asm/local.h

@@ -0,0 +1 @@
+#include <asm-generic/local.h>

software/linux/kernel/arch/arm/include/generated/asm/local64.h

@@ -0,0 +1 @@
+#include <asm-generic/local64.h>

software/linux/kernel/arch/arm/include/generated/asm/mm-arch-hooks.h

@@ -0,0 +1 @@
+#include <asm-generic/mm-arch-hooks.h>

software/linux/kernel/arch/arm/include/generated/asm/msgbuf.h

@@ -0,0 +1 @@
+#include <asm-generic/msgbuf.h>

software/linux/kernel/arch/arm/include/generated/asm/msi.h

@@ -0,0 +1 @@
+#include <asm-generic/msi.h>

software/linux/kernel/arch/arm/include/generated/asm/param.h

@@ -0,0 +1 @@
+#include <asm-generic/param.h>

software/linux/kernel/arch/arm/include/generated/asm/parport.h

@@ -0,0 +1 @@
+#include <asm-generic/parport.h>

software/linux/kernel/arch/arm/include/generated/asm/poll.h

@@ -0,0 +1 @@
+#include <asm-generic/poll.h>

software/linux/kernel/arch/arm/include/generated/asm/preempt.h

@@ -0,0 +1 @@
+#include <asm-generic/preempt.h>

software/linux/kernel/arch/arm/include/generated/asm/resource.h

@@ -0,0 +1 @@
+#include <asm-generic/resource.h>

software/linux/kernel/arch/arm/include/generated/asm/rwsem.h

@@ -0,0 +1 @@
+#include <asm-generic/rwsem.h>

software/linux/kernel/arch/arm/include/generated/asm/seccomp.h

@@ -0,0 +1 @@
+#include <asm-generic/seccomp.h>

software/linux/kernel/arch/arm/include/generated/asm/segment.h

@@ -0,0 +1 @@
+#include <asm-generic/segment.h>

software/linux/kernel/arch/arm/include/generated/asm/sembuf.h

@@ -0,0 +1 @@
+#include <asm-generic/sembuf.h>

software/linux/kernel/arch/arm/include/generated/asm/serial.h

@@ -0,0 +1 @@
+#include <asm-generic/serial.h>

software/linux/kernel/arch/arm/include/generated/asm/shmbuf.h

@@ -0,0 +1 @@
+#include <asm-generic/shmbuf.h>

software/linux/kernel/arch/arm/include/generated/asm/siginfo.h

@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>

software/linux/kernel/arch/arm/include/generated/asm/simd.h

@@ -0,0 +1 @@
+#include <asm-generic/simd.h>

software/linux/kernel/arch/arm/include/generated/asm/sizes.h

@@ -0,0 +1 @@
+#include <asm-generic/sizes.h>

software/linux/kernel/arch/arm/include/generated/asm/socket.h

@@ -0,0 +1 @@
+#include <asm-generic/socket.h>

software/linux/kernel/arch/arm/include/generated/asm/sockios.h

@@ -0,0 +1 @@
+#include <asm-generic/sockios.h>

software/linux/kernel/arch/arm/include/generated/asm/termbits.h

@@ -0,0 +1 @@
+#include <asm-generic/termbits.h>

software/linux/kernel/arch/arm/include/generated/asm/termios.h

@@ -0,0 +1 @@
+#include <asm-generic/termios.h>

software/linux/kernel/arch/arm/include/generated/asm/timex.h

@@ -0,0 +1 @@
+#include <asm-generic/timex.h>

software/linux/kernel/arch/arm/include/generated/asm/trace_clock.h

@@ -0,0 +1 @@
+#include <asm-generic/trace_clock.h>