601 lines
34 KiB
Plaintext
601 lines
34 KiB
Plaintext
# -------------------------------------------------------------------------- #
|
|
#
|
|
# Copyright (C) 2017 Intel Corporation. All rights reserved.
|
|
# Your use of Intel Corporation's design tools, logic functions
|
|
# and other software and tools, and its AMPP partner logic
|
|
# functions, and any output files from any of the foregoing
|
|
# (including device programming or simulation files), and any
|
|
# associated documentation or information are expressly subject
|
|
# to the terms and conditions of the Intel Program License
|
|
# Subscription Agreement, the Intel Quartus Prime License Agreement,
|
|
# the Intel MegaCore Function License Agreement, or other
|
|
# applicable license agreement, including, without limitation,
|
|
# that your use is for the sole purpose of programming logic
|
|
# devices manufactured by Intel and sold by Intel or its
|
|
# authorized distributors. Please refer to the applicable
|
|
# agreement for further details.
|
|
#
|
|
# -------------------------------------------------------------------------- #
|
|
#
|
|
# Quartus Prime
|
|
# Version 17.0.0 Build 595 04/25/2017 SJ Lite Edition
|
|
# Date created = 11:51:50 November 03, 2017
|
|
#
|
|
# -------------------------------------------------------------------------- #
|
|
#
|
|
# Notes:
|
|
#
|
|
# 1) The default values for assignments are stored in the file:
|
|
# cyc1000_nios_assignment_defaults.qdf
|
|
# If this file doesn't exist, see file:
|
|
# assignment_defaults.qdf
|
|
#
|
|
# 2) Altera recommends that you do not modify this file. This
|
|
# file is updated automatically by the Quartus Prime software
|
|
# and any changes you make may be lost or overwritten.
|
|
#
|
|
# -------------------------------------------------------------------------- #
|
|
|
|
|
|
# Project-Wide Assignments
|
|
# ========================
|
|
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 17.0.0
|
|
set_global_assignment -name PROJECT_CREATION_TIME_DATE "11:51:50 NOVEMBER 03, 2017"
|
|
set_global_assignment -name LAST_QUARTUS_VERSION "17.1.1 Standard Edition"
|
|
|
|
|
|
# Analysis & Synthesis Assignments
|
|
# ================================
|
|
set_global_assignment -name FAMILY "Cyclone 10 LP"
|
|
set_global_assignment -name TOP_LEVEL_ENTITY tranZPUter
|
|
|
|
# Fitter Assignments
|
|
# ==================
|
|
set_global_assignment -name DEVICE 10CL025YU256C8G
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
|
|
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
|
|
|
|
# Assembler Assignments
|
|
# =====================
|
|
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
|
|
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
|
|
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
|
|
set_global_assignment -name PARTITION_NETLIST_TYPE POST_FIT -section_id Top
|
|
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
|
|
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
|
|
set_global_assignment -name ENABLE_OCT_DONE OFF
|
|
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "PASSIVE SERIAL"
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
|
|
set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF
|
|
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
|
|
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise
|
|
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall
|
|
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise
|
|
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall
|
|
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "COMPILER CONFIGURED"
|
|
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
|
|
set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"
|
|
|
|
#============================================================
|
|
# UART (PIO_01, PIO_02, PIO_05, PIO_06)
|
|
#============================================================
|
|
set_location_assignment PIN_D15 -to UART_RX_0
|
|
set_location_assignment PIN_F13 -to UART_TX_0
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_RX_0
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_TX_0
|
|
set_location_assignment PIN_C15 -to UART_RX_1
|
|
set_location_assignment PIN_F15 -to UART_TX_1
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_RX_1
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_TX_1
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to UART_TX_0
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to UART_TX_1
|
|
|
|
#============================================================
|
|
# SD CARD (PIO_03, PIO_04, PIO_07, PIO_08)
|
|
#============================================================
|
|
set_location_assignment PIN_D16 -to SDCARD_MISO[0]
|
|
set_location_assignment PIN_C16 -to SDCARD_MOSI[0]
|
|
set_location_assignment PIN_F16 -to SDCARD_CLK[0]
|
|
set_location_assignment PIN_B16 -to SDCARD_CS[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDCARD_MISO[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDCARD_MOSI[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDCARD_CLK[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDCARD_CS[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDCARD_MOSI[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDCARD_CLK[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDCARD_CS[0]
|
|
|
|
#============================================================
|
|
# CLOCK
|
|
#============================================================
|
|
set_location_assignment PIN_M2 -to CLOCK_12M
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLOCK_12M
|
|
#set_location_assignment PIN_E15 -to CLK_X
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLK_X
|
|
|
|
#============================================================
|
|
# LED
|
|
#============================================================
|
|
set_location_assignment PIN_N3 -to LED[7]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[7]
|
|
set_location_assignment PIN_N5 -to LED[6]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[6]
|
|
set_location_assignment PIN_R4 -to LED[5]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[5]
|
|
set_location_assignment PIN_T2 -to LED[4]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[4]
|
|
set_location_assignment PIN_R3 -to LED[3]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[3]
|
|
set_location_assignment PIN_T3 -to LED[2]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[2]
|
|
set_location_assignment PIN_T4 -to LED[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[1]
|
|
set_location_assignment PIN_M6 -to LED[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED[0]
|
|
|
|
#============================================================
|
|
# SDRAM
|
|
#============================================================
|
|
# Data bus
|
|
set_location_assignment PIN_B10 -to SDRAM_DQ[0]
|
|
set_location_assignment PIN_A10 -to SDRAM_DQ[1]
|
|
set_location_assignment PIN_B11 -to SDRAM_DQ[2]
|
|
set_location_assignment PIN_A11 -to SDRAM_DQ[3]
|
|
set_location_assignment PIN_A12 -to SDRAM_DQ[4]
|
|
set_location_assignment PIN_D9 -to SDRAM_DQ[5]
|
|
set_location_assignment PIN_B12 -to SDRAM_DQ[6]
|
|
set_location_assignment PIN_C9 -to SDRAM_DQ[7]
|
|
set_location_assignment PIN_D11 -to SDRAM_DQ[8]
|
|
set_location_assignment PIN_E11 -to SDRAM_DQ[9]
|
|
set_location_assignment PIN_A15 -to SDRAM_DQ[10]
|
|
set_location_assignment PIN_E9 -to SDRAM_DQ[11]
|
|
set_location_assignment PIN_D14 -to SDRAM_DQ[12]
|
|
set_location_assignment PIN_F9 -to SDRAM_DQ[13]
|
|
set_location_assignment PIN_C14 -to SDRAM_DQ[14]
|
|
set_location_assignment PIN_A14 -to SDRAM_DQ[15]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[2]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[3]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[4]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[5]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[6]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[7]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[8]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[9]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[10]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[11]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[12]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[13]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[14]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQ[15]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[1]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[2]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[3]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[4]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[5]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[6]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[7]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[8]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[9]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[10]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[11]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[12]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[13]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[14]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQ[15]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[0]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[1]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[2]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[3]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[4]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[5]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[6]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[7]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[8]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[9]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[10]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[11]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[12]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[13]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[14]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQ[15]
|
|
# Address Bus
|
|
set_location_assignment PIN_A3 -to SDRAM_ADDR[0]
|
|
set_location_assignment PIN_B5 -to SDRAM_ADDR[1]
|
|
set_location_assignment PIN_B4 -to SDRAM_ADDR[2]
|
|
set_location_assignment PIN_B3 -to SDRAM_ADDR[3]
|
|
set_location_assignment PIN_C3 -to SDRAM_ADDR[4]
|
|
set_location_assignment PIN_D3 -to SDRAM_ADDR[5]
|
|
set_location_assignment PIN_E6 -to SDRAM_ADDR[6]
|
|
set_location_assignment PIN_E7 -to SDRAM_ADDR[7]
|
|
set_location_assignment PIN_D6 -to SDRAM_ADDR[8]
|
|
set_location_assignment PIN_D8 -to SDRAM_ADDR[9]
|
|
set_location_assignment PIN_A5 -to SDRAM_ADDR[10]
|
|
set_location_assignment PIN_E8 -to SDRAM_ADDR[11]
|
|
set_location_assignment PIN_A2 -to SDRAM_ADDR[12]
|
|
set_location_assignment PIN_C6 -to SDRAM_ADDR[13]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[2]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[3]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[4]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[5]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[6]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[7]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[8]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[9]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[10]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[11]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[12]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_ADDR[13]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[1]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[2]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[3]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[4]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[5]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[6]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[7]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[8]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[9]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[10]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[11]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[12]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_ADDR[13]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[0]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[1]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[2]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[3]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[4]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[5]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[6]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[7]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[8]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[9]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[10]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[11]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[12]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_ADDR[13]
|
|
# Byte addressing
|
|
set_location_assignment PIN_A4 -to SDRAM_BA[0]
|
|
set_location_assignment PIN_B6 -to SDRAM_BA[1]
|
|
set_location_assignment PIN_B13 -to SDRAM_DQM[0]
|
|
set_location_assignment PIN_D12 -to SDRAM_DQM[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_BA[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_BA[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQM[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_DQM[1]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_BA[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_BA[1]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQM[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_DQM[1]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_BA[0]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_BA[1]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQM[0]
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_DQM[1]
|
|
# Chip control.
|
|
set_location_assignment PIN_C8 -to SDRAM_CAS
|
|
set_location_assignment PIN_B7 -to SDRAM_RAS
|
|
set_location_assignment PIN_A7 -to SDRAM_WE
|
|
set_location_assignment PIN_A6 -to SDRAM_CS
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_CAS
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_RAS
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_WE
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_CS
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_CAS
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_RAS
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_WE
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_CS
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_CAS
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_RAS
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_WE
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_CS
|
|
# Clock and enabling.
|
|
set_location_assignment PIN_F8 -to SDRAM_CKE
|
|
set_location_assignment PIN_B14 -to SDRAM_CLK
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_CKE
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDRAM_CLK
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_CKE
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SDRAM_CLK
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_CKE
|
|
set_instance_assignment -name SLEW_RATE 2 -to SDRAM_CLK
|
|
|
|
#============================================================
|
|
# FT2232H
|
|
#============================================================
|
|
# ADBUS
|
|
#set_location_assignment PIN_H3 -to ADBUS_0
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_0
|
|
#set_location_assignment PIN_H4 -to ADBUS_1
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_1
|
|
#set_location_assignment PIN_J4 -to ADBUS_2
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_2
|
|
#set_location_assignment PIN_J5 -to ADBUS_3
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_3
|
|
#set_location_assignment PIN_M8 -to ADBUS_4
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_4
|
|
#set_location_assignment PIN_N8 -to ADBUS_7
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ADBUS_7
|
|
# BDBUS
|
|
#set_location_assignment PIN_R7 -to BDBUS[0]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[0]
|
|
#set_location_assignment PIN_T7 -to BDBUS[1]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[1]
|
|
#set_location_assignment PIN_R6 -to BDBUS[2]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[2]
|
|
#set_location_assignment PIN_T6 -to BDBUS[3]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[3]
|
|
#set_location_assignment PIN_R5 -to BDBUS[4]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[4]
|
|
#set_location_assignment PIN_T5 -to BDBUS[5]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BDBUS[5]
|
|
|
|
#============================================================
|
|
# Serial Configuration Memory
|
|
#============================================================
|
|
#set_location_assignment PIN_H2 -to AS_DATA0
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AS_DATA0
|
|
#set_location_assignment PIN_C1 -to AS_ASDO
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AS_ASDO
|
|
#set_location_assignment PIN_D2 -to AS_NCS
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AS_NCS
|
|
#set_location_assignment PIN_H1 -to AS_DCLK
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AS_DCLK
|
|
|
|
#============================================================
|
|
# PMOD IO Header PIO0 - PIO7
|
|
#============================================================
|
|
#set_location_assignment PIN_F13 -to PIO[1]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[1]
|
|
#set_location_assignment PIN_F15 -to PIO[2]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[2]
|
|
#set_location_assignment PIN_F16 -to PIO[3]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[3]
|
|
#set_location_assignment PIN_D16 -to PIO[4]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[4]
|
|
#set_location_assignment PIN_D15 -to PIO[5]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[5]
|
|
#set_location_assignment PIN_C15 -to PIO[6]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[6]
|
|
#set_location_assignment PIN_B16 -to PIO[7]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[7]
|
|
#set_location_assignment PIN_C16 -to PIO[8]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to PIO[8]
|
|
|
|
#============================================================
|
|
# TCPU - Z80 Bus Controller
|
|
#============================================================
|
|
# JP 9 GPIO14 - GPIO22 (D6-D14)
|
|
set_location_assignment PIN_N2 -to CYC_D[15]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[15]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[15]
|
|
set_location_assignment PIN_N1 -to CYC_D[14]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[14]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[14]
|
|
set_location_assignment PIN_P2 -to CYC_D[13]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[13]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[13]
|
|
set_location_assignment PIN_J1 -to CYC_D[12]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[12]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[12]
|
|
set_location_assignment PIN_J2 -to CYC_D[11]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[11]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[11]
|
|
set_location_assignment PIN_K2 -to CYC_D[10]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[10]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[10]
|
|
set_location_assignment PIN_L2 -to CYC_D[9]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[9]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[9]
|
|
set_location_assignment PIN_P1 -to CYC_D[8]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[8]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[8]
|
|
set_location_assignment PIN_R1 -to CYC_CTL_SET_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_CTL_SET_n
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_CTL_SET_n
|
|
# JP 5 GPIO8 - GPIO13 (D0 - D5)
|
|
set_location_assignment PIN_N16 -to CYC_CLK_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_CLK_n
|
|
set_location_assignment PIN_L15 -to CYC_NMI_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_NMI_n
|
|
set_location_assignment PIN_L16 -to CYC_INT_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_INT_n
|
|
set_location_assignment PIN_K15 -to CYC_WAIT_I_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_WAIT_I_n
|
|
set_location_assignment PIN_K16 -to CYC_BUSACK_I_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_BUSACK_I_n
|
|
set_location_assignment PIN_J14 -to CYC_BUSACK_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_BUSACK_n
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_BUSACK_n
|
|
#set_location_assignment PIN_K1 -to D11_R
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to D11_R
|
|
#set_location_assignment PIN_L1 -to D12_R
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to D12_R
|
|
# JP 5 GPIO23 (AIN), GPIO24 (AIN7)
|
|
set_location_assignment PIN_T12 -to CYC_BUSRQ_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_BUSRQ_n
|
|
set_location_assignment PIN_R11 -to CYC_BUSRQ_I_n
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_BUSRQ_I_n
|
|
# JP 4 GPIO0 (AREF), GPIO1-7 (AIN0-6)
|
|
set_location_assignment PIN_P11 -to CYC_D[0]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[0]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[0]
|
|
set_location_assignment PIN_R12 -to CYC_D[1]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[1]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[1]
|
|
set_location_assignment PIN_T13 -to CYC_D[2]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[2]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[2]
|
|
set_location_assignment PIN_R13 -to CYC_D[3]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[3]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[3]
|
|
set_location_assignment PIN_T14 -to CYC_D[4]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[4]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[4]
|
|
set_location_assignment PIN_P14 -to CYC_D[5]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[5]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[5]
|
|
set_location_assignment PIN_R14 -to CYC_D[6]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[6]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[6]
|
|
set_location_assignment PIN_T15 -to CYC_D[7]
|
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_D[7]
|
|
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_D[7]
|
|
# user button rewired to JTAG jumper
|
|
#set_location_assignment PIN_N6 -to CYC_CTL_CLR_n
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CYC_CTL_CLR_n
|
|
#set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to CYC_CTL_CLR_n
|
|
|
|
#============================================================
|
|
# GPIO14 - GPIO22 Header
|
|
#============================================================
|
|
#set_location_assignment PIN_N2 -to GPIO[14]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[14]
|
|
#set_location_assignment PIN_N1 -to GPIO[15]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[15]
|
|
#set_location_assignment PIN_P2 -to GPIO[16]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[16]
|
|
#set_location_assignment PIN_J1 -to GPIO[17]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[17]
|
|
#set_location_assignment PIN_J2 -to GPIO[18]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[18]
|
|
#set_location_assignment PIN_K2 -to GPIO[19]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[19]
|
|
#set_location_assignment PIN_L2 -to GPIO[20]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[20]
|
|
#set_location_assignment PIN_P1 -to GPIO[21]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[21]
|
|
#set_location_assignment PIN_R1 -to GPIO[22]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[22]
|
|
|
|
#============================================================
|
|
# GPIO8 - GPIO13 Header
|
|
#============================================================
|
|
#set_location_assignment PIN_N16 -to GPIO[8]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[8]
|
|
#set_location_assignment PIN_L15 -to GPIO[9]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[9]
|
|
#set_location_assignment PIN_L16 -to GPIO[10]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[10]
|
|
#set_location_assignment PIN_K15 -to GPIO[11]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[11]
|
|
#set_location_assignment PIN_K16 -to GPIO[12]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[12]
|
|
#set_location_assignment PIN_J14 -to GPIO[13]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[13]
|
|
#set_location_assignment PIN_K1 -to D11_R
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to D11_R
|
|
#set_location_assignment PIN_L1 -to D12_R
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to D12_R
|
|
|
|
#============================================================
|
|
# GPIO0 - GPIO7 Header
|
|
#============================================================
|
|
#set_location_assignment PIN_T12 -to AIN
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AIN
|
|
#set_location_assignment PIN_P11 -to AREF
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to AREF
|
|
#set_location_assignment PIN_R12 -to GPIO[0]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[0]
|
|
#set_location_assignment PIN_T13 -to GPIO[1]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[1]
|
|
#set_location_assignment PIN_R13 -to GPIO[2]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[2]
|
|
#set_location_assignment PIN_T14 -to GPIO[3]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[3]
|
|
#set_location_assignment PIN_P14 -to GPIO[4]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[4]
|
|
#set_location_assignment PIN_R14 -to GPIO[5]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[5]
|
|
#set_location_assignment PIN_T15 -to GPIO[6]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[6]
|
|
#set_location_assignment PIN_R11 -to GPIO[7]
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to GPIO[7]
|
|
|
|
#============================================================
|
|
# Buttons
|
|
#============================================================
|
|
#set_location_assignment PIN_N6 -to USER_BTN
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to USER_BTN
|
|
|
|
#============================================================
|
|
# 3-Axis Accelerometer
|
|
#============================================================
|
|
#set_location_assignment PIN_D1 -to SEN_CS
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_CS
|
|
#set_location_assignment PIN_B1 -to SEN_INT1
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_INT1
|
|
#set_location_assignment PIN_C2 -to SEN_INT2
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_INT2
|
|
#set_location_assignment PIN_G2 -to SEN_SDI
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_SDI
|
|
#set_location_assignment PIN_G1 -to SEN_SDO
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_SDO
|
|
#set_location_assignment PIN_F3 -to SEN_SPC
|
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SEN_SPC
|
|
|
|
#============================================================
|
|
# Modules and Files
|
|
#============================================================
|
|
#
|
|
set_global_assignment -name VHDL_FILE tranZPUter_Toplevel.vhd
|
|
set_global_assignment -name QIP_FILE Clock_12to100.qip
|
|
#set_location_assignment PLL_1 -to "Clock_12to100:mypll"
|
|
set_global_assignment -name SDC_FILE tranZPUter_constraints.sdc
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_core_flex.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_pkg.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_core_small.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_core_medium.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_core_evo.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_core_evo_L2.vhd
|
|
set_global_assignment -name VHDL_FILE ../cpu/zpu_uart_debug.vhd
|
|
set_global_assignment -name VHDL_FILE ../zpu_soc_pkg.vhd
|
|
set_global_assignment -name VHDL_FILE ../zpu_soc.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/RAM/dpram.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/uart/uart.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/intr/interrupt_controller.vhd
|
|
#set_global_assignment -name VHDL_FILE ../devices/sysbus/spi/spi.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/SDMMC/SDCard.vhd
|
|
#set_global_assignment -name VHDL_FILE ../devices/sysbus/ps2/io_ps2_com.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/timer/timer_controller.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/BRAM/BootROM.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/BRAM/DualPortBootBRAM.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/BRAM/SinglePortBootBRAM.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/BRAM/SinglePortBRAM.vhd
|
|
#set_global_assignment -name VHDL_FILE ../devices/sysbus/ioctl/ioctl.vhd
|
|
set_global_assignment -name VHDL_FILE ../devices/sysbus/TCPU/tcpu.vhd
|
|
set_global_assignment -name QIP_FILE ../devices/sysbus/SDRAM/48LC16M16.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/sysbus/SDRAM/48LC16M16_cached.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/sysbus/SDRAM/W9864G6.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/sysbus/SDRAM/W9864G6_cached.qip
|
|
set_global_assignment -name QIP_FILE ../devices/WishBone/SDRAM/48LC16M16.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/WishBone/SDRAM/48LC16M16_cached.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/WishBone/SDRAM/W9864G6.qip
|
|
#set_global_assignment -name QIP_FILE ../devices/WishBone/SDRAM/W9864G6_cached.qip
|
|
#set_global_assignment -name VHDL_FILE ../devices/WishBone/I2C/i2c_master_top.vhd
|
|
#set_global_assignment -name VHDL_FILE ../devices/WishBone/I2C/i2c_master_byte_ctrl.vhd
|
|
#set_global_assignment -name VHDL_FILE ../devices/WishBone/I2C/i2c_master_bit_ctrl.vhd
|
|
#set_global_assignment -name QIP_FILE ../devices/WishBone/SDRAM/wbsdram.qip
|
|
set_global_assignment -name VHDL_FILE ../devices/WishBone/SDRAM/wbsdram.vhd
|
|
set_global_assignment -name OPTIMIZATION_MODE "HIGH PERFORMANCE EFFORT"
|
|
|
|
set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008
|
|
set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
|
|
|
|
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)"
|
|
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation
|
|
set_global_assignment -name ENABLE_SIGNALTAP OFF
|
|
set_global_assignment -name USE_SIGNALTAP_FILE /srv/dvlp/Projects/dev/github/tranZPUter/build/tranZPUter.stp
|
|
|
|
set_global_assignment -name SIGNALTAP_FILE /srv/dvlp/Projects/dev/github/tranZPUter/build/tranZPUter.stp
|
|
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS ON
|
|
set_global_assignment -name ENABLE_DRC_SETTINGS ON
|
|
set_global_assignment -name SAVE_DISK_SPACE OFF
|
|
|
|
|
|
|
|
|
|
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top |