eaw/MZ80A_RFS
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Philip Smart
2019-10-29 16:01:30 +00:00
committed by GitHub
parent 170d57adff
commit 38583cdcea
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@@ -53,9 +53,9 @@ The procedure to build a ROM is:-<br/>
3. Build the ROM using the software/make_roms.sh - before using you need to create your own section of MZF files by listing the files with ls -l then converting them into a set of ROM256_USER variables for programs that will go into the User Socket Flash RAM and ROM256_MROM variables for programs that will go into the Monitor Socket Flash RAM.<br/>
Upon boot, the typical SA1510 signon banner will be appended with "+ RFS" if all works well. You can then issue MZ700/MZ800 monitor commands or I to list Rom Filing System contents. To Load a program from the Rom Filing System, type:-<br/>
L< RFS number - as seen in the I command output ><br/>
L\<RFS number - as seen in the I command output ><br/>
or<br/>
L< program name ><br/>
L\<program name ><br/>
(Using lower case 'l' in place of 'L' doesnt auto execute the program once loaded into memory)
If the 40/80 column card is installed, typing '4' switches to 40 Column display, typing '8' switches to 80 Column display.
@@ -74,7 +74,7 @@ The supported commands can be found in the table below:
| J | \<address> | Jump \(start execution\) at location \<address>\. |
| L | \<name> or \<file number> | Load file into memory from Tape or Rom Filing System\. If a \<name> or \<file number> is given, the RFS is searched, if no parameter is given then the first program encountered on tape will be loaded\. |
| l | \<name> or \<file number> | Same as above but once the program is loaded it will not be executed\. Control will return to the monitor\. |
| M | \<address> | Edit and change memory locations starting at <address>\. |
| M | \<address> | Edit and change memory locations starting at \<address>\. |
| P | n/a | Run a connected printer test\. |
| R | n/a | Run a memory test on the main memory\. |
| S | \<start addr> \<end addr> \<exec addr> | Save a block of memory to tape\. You will be prompted to enter the filename\. |