Timur Tabi 82c9dfdc20 powerpc/fsl: add 'pixis_reset dump' command ...

Add the 'pixis_reset dump' command, which displays the contents of the PIXIS
registers.  This command is only available if DEBUG is defined.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2011-04-28 22:09:23 -05:00

..

cadmus.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

cadmus.h

Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.

2007-12-11 22:34:20 -06:00

cds_pci_ft.c

FSL: Clean up board/freescale/common/Makefile

2008-03-26 11:43:04 -05:00

cds_via.c

FSL: Clean up board/freescale/common/Makefile

2008-03-26 11:43:04 -05:00

eeprom.h

Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.

2007-12-11 22:34:20 -06:00

ics307_clk.c

Move ICS CLK chip frequency calculation code into a common board library

2010-07-16 10:55:08 -05:00

ics307_clk.h

Move ICS CLK chip frequency calculation code into a common board library

2010-07-16 10:55:08 -05:00

Makefile

powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)

2011-04-27 22:29:04 -05:00

ngpixis.c

powerpc/fsl: add 'pixis_reset dump' command

2011-04-28 22:09:23 -05:00

ngpixis.h

powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)

2011-04-27 22:29:04 -05:00

pixis.c

Make sure that argv[] argument pointers are not modified.

2010-07-04 23:55:42 +02:00

pixis.h

ppc/85xx: Add a structure defn for PIXIS registers

2010-07-16 10:55:08 -05:00

pq-mds-pib.c

ppc/85xx: Add PIB/ATM support for MPC8569mds

2010-01-25 22:13:26 -06:00

pq-mds-pib.h

mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support

2007-08-16 23:12:11 -05:00

sdhc_boot.c

powerpc/85xx: Enable eSDHC boot support on P2020 DS

2011-04-04 22:26:32 -05:00

sgmii_riser.c

fsl: Remove unnecessary debug printfs

2009-03-09 17:46:10 -05:00

sgmii_riser.h

Fixup SGMII PHY ids in the device tree

2009-02-16 18:05:54 -06:00

sys_eeprom.c

fsl: obsolete NXID v0 EEPROMs, automatically upgrade them to NXID v1

2011-04-04 09:24:42 -05:00

via.h

Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.

2007-12-11 22:34:20 -06:00