MultiComp_MiSTer/MultiComp.sv

//============================================================================
//  Grant’s multi computer
// 
//  Port to MiSTer.
//
//  Based on Grant’s multi computer
//  http://searle.hostei.com/grant/
//  http://searle.hostei.com/grant/Multicomp/index.html
//	 and WiSo's collector blog (MiST port)
//	 https://ws0.org/building-your-own-custom-computer-with-the-mist-fpga-board-part-1/
//	 https://ws0.org/building-your-own-custom-computer-with-the-mist-fpga-board-part-2/
//
//  This program is free software; you can redistribute it and/or modify it
//  under the terms of the GNU General Public License as published by the Free
//  Software Foundation; either version 2 of the License, or (at your option)
//  any later version.
//
//  This program is distributed in the hope that it will be useful, but WITHOUT
//  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
//  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
//  more details.
//
//  You should have received a copy of the GNU General Public License along
//  with this program; if not, write to the Free Software Foundation, Inc.,
//  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
//============================================================================


module emu
(
	//Master input clock
	input         CLK_50M,

	//Async reset from top-level module.
	//Can be used as initial reset.
	input         RESET,

	//Must be passed to hps_io module
	inout  [44:0] HPS_BUS,

	//Base video clock. Usually equals to CLK_SYS.
	output        CLK_VIDEO,

	//Multiple resolutions are supported using different CE_PIXEL rates.
	//Must be based on CLK_VIDEO
	output        CE_PIXEL,

	//Video aspect ratio for HDMI. Most retro systems have ratio 4:3.
	output  [7:0] VIDEO_ARX,
	output  [7:0] VIDEO_ARY,

	output  [7:0] VGA_R,
	output  [7:0] VGA_G,
	output  [7:0] VGA_B,
	output        VGA_HS,
	output        VGA_VS,
	output        VGA_DE,    // = ~(VBlank | HBlank)

	output        LED_USER,  // 1 - ON, 0 - OFF.

	// b[1]: 0 - LED status is system status OR'd with b[0]
	//       1 - LED status is controled solely by b[0]
	// hint: supply 2'b00 to let the system control the LED.
	output  [1:0] LED_POWER,
	output  [1:0] LED_DISK,

	output [15:0] AUDIO_L,
	output [15:0] AUDIO_R,
	output        AUDIO_S,   // 1 - signed audio samples, 0 - unsigned
	output  [1:0] AUDIO_MIX, // 0 - no mix, 1 - 25%, 2 - 50%, 3 - 100% (mono)
	input         TAPE_IN,

	// SD-SPI
	output        SD_SCK,
	output        SD_MOSI,
	input         SD_MISO,
	output        SD_CS,
	input         SD_CD,

	//High latency DDR3 RAM interface
	//Use for non-critical time purposes
	output        DDRAM_CLK,
	input         DDRAM_BUSY,
	output  [7:0] DDRAM_BURSTCNT,
	output [28:0] DDRAM_ADDR,
	input  [63:0] DDRAM_DOUT,
	input         DDRAM_DOUT_READY,
	output        DDRAM_RD,
	output [63:0] DDRAM_DIN,
	output  [7:0] DDRAM_BE,
	output        DDRAM_WE,

	//SDRAM interface with lower latency
	output        SDRAM_CLK,
	output        SDRAM_CKE,
	output [12:0] SDRAM_A,
	output  [1:0] SDRAM_BA,
	inout  [15:0] SDRAM_DQ,
	output        SDRAM_DQML,
	output        SDRAM_DQMH,
	output        SDRAM_nCS,
	output        SDRAM_nCAS,
	output        SDRAM_nRAS,
	output        SDRAM_nWE
);

assign {SD_SCK, SD_MOSI, SD_CS} = 'Z;
assign {SDRAM_DQ, SDRAM_A, SDRAM_BA, SDRAM_CLK, SDRAM_CKE, SDRAM_DQML, SDRAM_DQMH, SDRAM_nWE, SDRAM_nCAS, SDRAM_nRAS, SDRAM_nCS} = 'Z;
assign {DDRAM_CLK, DDRAM_BURSTCNT, DDRAM_ADDR, DDRAM_DIN, DDRAM_BE, DDRAM_RD, DDRAM_WE} = 0;

assign LED_USER  = 0;
assign LED_DISK  = ~driveLED;
assign LED_POWER = 0;

assign VIDEO_ARX = 4;
assign VIDEO_ARY = 3;


`include "build_id.v"
localparam CONF_STR = {
	"MultiComp;;",
	//"-;",
	//"O79,CPU/ROM,Z80-CP/M,Z80-Basic,6502-Basic,6809-Basic;",
	"-;",
	"V,v1.0.",`BUILD_DATE
};


//////////////////   HPS I/O   ///////////////////
wire  [1:0] buttons;
wire [31:0] status;

wire PS2_CLK;
wire PS2_DAT;

wire forced_scandoubler;

wire [31:0] sd_lba;
wire        sd_rd;
wire        sd_wr;
wire        sd_ack;
wire  [8:0] sd_buff_addr;
wire  [7:0] sd_buff_dout;
wire  [7:0] sd_buff_din;
wire        sd_buff_wr;
wire        sd_ack_conf;

hps_io #(.STRLEN($size(CONF_STR)>>3)) hps_io
(
	.clk_sys(CLK_50M),
	.HPS_BUS(HPS_BUS),

	.conf_str(CONF_STR),

	.buttons(buttons),
	.status(status),
	.forced_scandoubler(forced_scandoubler),

	.ps2_kbd_clk_out(PS2_CLK),
	.ps2_kbd_data_out(PS2_DAT)
);

/////////////////  RESET  /////////////////////////

wire reset = RESET | status[0] | buttons[1];

///////////////////////////////////////////////////

assign CLK_VIDEO = CLK_50M;

wire hblank, vblank;
wire hs, vs;
wire [1:0] r,g,b;
wire driveLED;
//wire [2:0] cpu_rom_type = status[9:7];

MicrocomputerZ80CPM MicrocomputerZ80CPM
(
	.N_RESET(~reset),
	.clk(CLK_50M),
	.R(r),
	.G(g),
	.B(b),
	.HS(hs),
	.VS(vs),
	.hBlank(hblank),
	.vBlank(vblank),
	.cepix(CE_PIXEL),
	.ps2Clk(PS2_CLK),
	.ps2Data(PS2_DAT),
	.sdCS(SD_CS),
	.sdMOSI(SD_MOSI),
	.sdMISO(SD_MISO),
	.sdSCLK(SD_SCK),
	.driveLED(driveLED)
);
 
video_cleaner video_cleaner
(
	.clk_vid(CLK_VIDEO),
	.ce_pix(CE_PIXEL),

	.R({4{r}}),
	.G({4{g}}),
	.B({4{b}}),
	.HSync(hs),
	.VSync(vs),
	.HBlank(hblank),
	.VBlank(vblank),

	.VGA_R(VGA_R),
	.VGA_G(VGA_G),
	.VGA_B(VGA_B),
	.VGA_VS(VGA_VS),
	.VGA_HS(VGA_HS),
	.VGA_DE(VGA_DE)
);


endmodule