mirror of
https://github.com/MiSTer-devel/Menu_MiSTer.git
synced 2026-04-19 03:04:31 +00:00
297 lines
9.6 KiB
Systemverilog
297 lines
9.6 KiB
Systemverilog
//
|
|
// sdram.v
|
|
//
|
|
// Static RAM controller implementation using SDRAM MT48LC16M16A2
|
|
//
|
|
// Copyright (c) 2015,2016 Sorgelig
|
|
//
|
|
// Some parts of SDRAM code used from project:
|
|
// http://hamsterworks.co.nz/mediawiki/index.php/Simple_SDRAM_Controller
|
|
//
|
|
// This source file is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published
|
|
// by the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This source file is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
//
|
|
// ------------------------------------------
|
|
//
|
|
// v2.1 - Add universal 8/16 bit mode.
|
|
//
|
|
|
|
module sdram
|
|
(
|
|
input init, // reset to initialize RAM
|
|
input clk, // clock ~100MHz
|
|
//
|
|
// SDRAM_* - signals to the MT48LC16M16 chip
|
|
inout reg [15:0] SDRAM_DQ, // 16 bit bidirectional data bus
|
|
output reg [12:0] SDRAM_A, // 13 bit multiplexed address bus
|
|
output reg SDRAM_DQML, // two byte masks
|
|
output reg SDRAM_DQMH, //
|
|
output reg [1:0] SDRAM_BA, // two banks
|
|
output SDRAM_nCS, // a single chip select
|
|
output SDRAM_nWE, // write enable
|
|
output SDRAM_nRAS, // row address select
|
|
output SDRAM_nCAS, // columns address select
|
|
output SDRAM_CLK,
|
|
output SDRAM_CKE, // clock enable
|
|
//
|
|
input [1:0] wtbt, // 16bit mode: bit1 - write high byte, bit0 - write low byte,
|
|
// 8bit mode: 2'b00 - use addr[0] to decide which byte to write
|
|
// Ignored while reading.
|
|
//
|
|
input [26:0] addr, // 27 bit address for 8bit mode. addr[0] = 0 for 16bit mode for correct operations.
|
|
output [15:0] dout, // data output to cpu
|
|
input [15:0] din, // data input from cpu
|
|
input we, // cpu requests write
|
|
input rd, // cpu requests read
|
|
output reg ready // dout is valid. Ready to accept new read/write.
|
|
);
|
|
|
|
assign SDRAM_nCS = chip;
|
|
assign SDRAM_nRAS = command[2];
|
|
assign SDRAM_nCAS = command[1];
|
|
assign SDRAM_nWE = command[0];
|
|
assign SDRAM_CKE = 1;
|
|
assign {SDRAM_DQMH,SDRAM_DQML} = SDRAM_A[12:11];
|
|
|
|
assign dout = save_addr[0] ? {data[7:0], data[15:8]} : {data[15:8], data[7:0]};
|
|
|
|
// no burst configured
|
|
localparam BURST_LENGTH = 3'b000; // 000=1, 001=2, 010=4, 011=8
|
|
localparam ACCESS_TYPE = 1'b0; // 0=sequential, 1=interleaved
|
|
localparam CAS_LATENCY = 3'd2; // 2 for < 100MHz, 3 for >100MHz
|
|
localparam OP_MODE = 2'b00; // only 00 (standard operation) allowed
|
|
localparam NO_WRITE_BURST = 1'b1; // 0= write burst enabled, 1=only single access write
|
|
localparam MODE = {3'b000, NO_WRITE_BURST, OP_MODE, CAS_LATENCY, ACCESS_TYPE, BURST_LENGTH};
|
|
|
|
localparam sdram_startup_cycles= 14'd12100;// 100us, plus a little more, @ 100MHz
|
|
localparam cycles_per_refresh = 14'd780; // (64000*100)/8192-1 Calc'd as (64ms @ 100MHz)/8192 rose
|
|
localparam startup_refresh_max = 14'b11111111111111;
|
|
|
|
// SDRAM commands
|
|
localparam CMD_NOP = 3'b111;
|
|
localparam CMD_BURST_TERMINATE = 3'b110;
|
|
localparam CMD_READ = 3'b101;
|
|
localparam CMD_WRITE = 3'b100;
|
|
localparam CMD_ACTIVE = 3'b011;
|
|
localparam CMD_PRECHARGE = 3'b010;
|
|
localparam CMD_AUTO_REFRESH = 3'b001;
|
|
localparam CMD_LOAD_MODE = 3'b000;
|
|
|
|
reg [13:0] refresh_count = startup_refresh_max - sdram_startup_cycles;
|
|
reg [2:0] command = CMD_NOP;
|
|
reg [26:0] save_addr;
|
|
reg chip = 0;
|
|
|
|
reg [15:0] data;
|
|
|
|
typedef enum
|
|
{
|
|
STATE_STARTUP,
|
|
STATE_OPEN_1, STATE_OPEN_2,
|
|
STATE_WRITE,
|
|
STATE_READ,
|
|
STATE_RFSH,
|
|
STATE_IDLE, STATE_IDLE_1, STATE_IDLE_2, STATE_IDLE_3,
|
|
STATE_IDLE_4, STATE_IDLE_5, STATE_IDLE_6, STATE_IDLE_7
|
|
} state_t;
|
|
|
|
always @(posedge clk) begin
|
|
reg old_we, old_rd;
|
|
reg [CAS_LATENCY:0] data_ready_delay;
|
|
|
|
reg [15:0] new_data;
|
|
reg [1:0] new_wtbt;
|
|
reg new_we;
|
|
reg new_rd;
|
|
reg save_we = 1;
|
|
|
|
state_t state = STATE_STARTUP;
|
|
|
|
SDRAM_DQ <= 16'bZ;
|
|
command <= CMD_NOP;
|
|
refresh_count <= refresh_count+1'b1;
|
|
|
|
data_ready_delay <= {1'b0, data_ready_delay[CAS_LATENCY:1]};
|
|
|
|
if(data_ready_delay[0]) {ready, data} <= {1'b1, SDRAM_DQ};
|
|
|
|
case(state)
|
|
STATE_STARTUP: begin
|
|
//------------------------------------------------------------------------
|
|
//-- This is the initial startup state, where we wait for at least 100us
|
|
//-- before starting the start sequence
|
|
//--
|
|
//-- The initialisation is sequence is
|
|
//-- * de-assert SDRAM_CKE
|
|
//-- * 100us wait,
|
|
//-- * assert SDRAM_CKE
|
|
//-- * wait at least one cycle,
|
|
//-- * PRECHARGE
|
|
//-- * wait 2 cycles
|
|
//-- * REFRESH,
|
|
//-- * tREF wait
|
|
//-- * REFRESH,
|
|
//-- * tREF wait
|
|
//-- * LOAD_MODE_REG
|
|
//-- * 2 cycles wait
|
|
//------------------------------------------------------------------------
|
|
SDRAM_A <= 0;
|
|
SDRAM_BA <= 0;
|
|
|
|
if (refresh_count == (startup_refresh_max-64)) chip <= 1;
|
|
if (refresh_count == (startup_refresh_max-32)) chip <= 0;
|
|
|
|
// All the commands during the startup are NOPS, except these
|
|
if (refresh_count == startup_refresh_max-63 || refresh_count == startup_refresh_max-31) begin
|
|
// ensure all rows are closed
|
|
command <= CMD_PRECHARGE;
|
|
SDRAM_A[10] <= 1; // all banks
|
|
end
|
|
if (refresh_count == startup_refresh_max-55 || refresh_count == startup_refresh_max-23) begin
|
|
// these refreshes need to be at least tREF (66ns) apart
|
|
command <= CMD_AUTO_REFRESH;
|
|
end
|
|
if (refresh_count == startup_refresh_max-47 || refresh_count == startup_refresh_max-15) begin
|
|
command <= CMD_AUTO_REFRESH;
|
|
end
|
|
if (refresh_count == startup_refresh_max-39 || refresh_count == startup_refresh_max-7) begin
|
|
// Now load the mode register
|
|
command <= CMD_LOAD_MODE;
|
|
SDRAM_A <= MODE;
|
|
end
|
|
|
|
ready <= 0;
|
|
|
|
//------------------------------------------------------
|
|
//-- if startup is complete then go into idle mode,
|
|
//-- get prepared to accept a new command, and schedule
|
|
//-- the first refresh cycle
|
|
//------------------------------------------------------
|
|
if(!refresh_count) begin
|
|
state <= STATE_IDLE;
|
|
ready <= 1;
|
|
refresh_count <= 0;
|
|
end
|
|
end
|
|
|
|
STATE_IDLE_7: state <= STATE_IDLE_6;
|
|
STATE_IDLE_6: state <= STATE_IDLE_5;
|
|
STATE_IDLE_5: state <= STATE_IDLE_4;
|
|
STATE_IDLE_4: state <= STATE_IDLE_3;
|
|
STATE_IDLE_3: state <= STATE_IDLE_2;
|
|
STATE_IDLE_2: state <= STATE_IDLE_1;
|
|
STATE_IDLE_1: begin
|
|
state <= STATE_IDLE;
|
|
// mask possible refresh to reduce colliding.
|
|
if(refresh_count > cycles_per_refresh) begin
|
|
//------------------------------------------------------------------------
|
|
//-- Start the refresh cycle.
|
|
//-- This tasks tRFC (66ns), so 6 idle cycles are needed @ 100MHz
|
|
//------------------------------------------------------------------------
|
|
chip <= 1;
|
|
state <= STATE_RFSH;
|
|
command <= CMD_AUTO_REFRESH;
|
|
refresh_count <= refresh_count - cycles_per_refresh + 1'd1;
|
|
end
|
|
end
|
|
|
|
STATE_RFSH: begin
|
|
chip <= 0;
|
|
state <= STATE_IDLE_7;
|
|
command <= CMD_AUTO_REFRESH;
|
|
refresh_count <= refresh_count - cycles_per_refresh + 1'd1;
|
|
end
|
|
|
|
STATE_IDLE: begin
|
|
// Priority is to issue a refresh if one is outstanding
|
|
if(refresh_count > (cycles_per_refresh<<1)) state <= STATE_IDLE_1;
|
|
else if(new_rd | new_we) begin
|
|
new_rd <= 0;
|
|
save_addr <= addr;
|
|
if(~new_we & ~save_we & (save_addr[26:1] == addr[26:1])) begin
|
|
ready <= 1;
|
|
end else begin
|
|
new_we <= 0;
|
|
save_we <= new_we;
|
|
state <= STATE_OPEN_1;
|
|
command <= CMD_ACTIVE;
|
|
SDRAM_A <= addr[13:1];
|
|
SDRAM_BA <= addr[24:23];
|
|
chip <= addr[26];
|
|
end
|
|
end
|
|
end
|
|
|
|
// ACTIVE-to-READ or WRITE delay >20ns (-75)
|
|
STATE_OPEN_1: begin
|
|
SDRAM_A <= '1;
|
|
state <= STATE_OPEN_2;
|
|
end
|
|
STATE_OPEN_2: begin
|
|
SDRAM_A <= {save_we & (new_wtbt ? ~new_wtbt[1] : ~save_addr[0]), save_we & (new_wtbt ? ~new_wtbt[0] : save_addr[0]), 1'b1, save_addr[25], save_addr[22:14]};
|
|
state <= save_we ? STATE_WRITE : STATE_READ;
|
|
end
|
|
|
|
STATE_READ: begin
|
|
state <= STATE_IDLE_5;
|
|
command <= CMD_READ;
|
|
data_ready_delay[CAS_LATENCY] <= 1;
|
|
end
|
|
|
|
STATE_WRITE: begin
|
|
state <= STATE_IDLE_5;
|
|
command <= CMD_WRITE;
|
|
SDRAM_DQ <= new_wtbt ? new_data : {new_data[7:0], new_data[7:0]};
|
|
ready <= 1;
|
|
end
|
|
endcase
|
|
|
|
if(init) begin
|
|
state <= STATE_STARTUP;
|
|
refresh_count <= startup_refresh_max - sdram_startup_cycles;
|
|
end
|
|
|
|
old_we <= we;
|
|
if(we & ~old_we) {ready, new_we, new_data, new_wtbt} <= {1'b0, 1'b1, din, wtbt};
|
|
|
|
old_rd <= rd;
|
|
if(rd & ~old_rd) {ready, new_rd} <= {1'b0, 1'b1};
|
|
end
|
|
|
|
altddio_out
|
|
#(
|
|
.extend_oe_disable("OFF"),
|
|
.intended_device_family("Cyclone V"),
|
|
.invert_output("OFF"),
|
|
.lpm_hint("UNUSED"),
|
|
.lpm_type("altddio_out"),
|
|
.oe_reg("UNREGISTERED"),
|
|
.power_up_high("OFF"),
|
|
.width(1)
|
|
)
|
|
sdramclk_ddr
|
|
(
|
|
.datain_h(1'b0),
|
|
.datain_l(1'b1),
|
|
.outclock(clk),
|
|
.dataout(SDRAM_CLK),
|
|
.aclr(1'b0),
|
|
.aset(1'b0),
|
|
.oe(1'b1),
|
|
.outclocken(1'b1),
|
|
.sclr(1'b0),
|
|
.sset(1'b0)
|
|
);
|
|
|
|
endmodule
|