mirror of
https://github.com/MiSTer-devel/Arcade-TimePilot_MiSTer.git
synced 2026-04-19 03:03:31 +00:00
76b97e9979
-New model built using Time Pilot '84 as a base -Increase base clock to match actual frequencies of the PCB; fixes slower-than-normal game speed from the original implementation -Refactor all clocks derived from the base clock -Add implementation of the Konami 501 custom chip from Gyruss for more accurate handling of the Z80 and its data I/O -Adjust video timings to match the original (thank you to Artemio Urbina for assisting with this) -Adjust VBlank area; fixes graphical garbage outside the playfield -Change aspect ratio to square pixels as per the PCB's 6.144MHz pixel clock -Improve sprite rendering accuracy; fixes graphical errors in the sprite layer and correctly replicates a sprite discolration bug at the bottom of the screen present on the original PCB -Replace existing YM2149/AY-3-8910 module with JT49 from Gyruss; fixes the incorrect volume scale from the previous releases -Tune the switchable low-pass filters to better match the frequency response of the original PCB (thank you to Artemio Urbina for assisting with this) -Increase audio volume -Add high score auto-save support (JimmyStones) -Update framework
33 lines
4.6 KiB
Plaintext
33 lines
4.6 KiB
Plaintext
{ "" "" "" "Vip.Mixer: The MixerII register map changed in ACDS v16.0. Please refer to the VIP User Guide for details." { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.Reset_Source.reset_sys: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.Reset_Source.reset_warm: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.Reset_Source.reset_cold: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.Video_Output.control: Interrupt sender control.av_mm_control_interrupt is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.Video_Output: Interrupt sender Video_Output.status_update_irq is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram1_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram2_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Variable or input pin \"data_b\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Variable or input pin \"data_a\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Port \"extclk\" on the entity instantiation of \"cyclonev_pll\" is connected to a signal of width 1. The formal width of the signal in the module is 2. The extra bits will be left dangling without any fan-out logic." { } { } 0 12030 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Port \"trs\" on the entity instantiation of \"statemachine\" is connected to a signal of width 2. The formal width of the signal in the module is 1. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Port \"reset_value\" on the entity instantiation of \"h_counter\" is connected to a signal of width 32. The formal width of the signal in the module is 16. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Overwriting existing clock: vip\|hps\|fpga_interfaces\|clocks_resets\|h2f_user0_clk" { } { } 0 332043 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "LOCKED port on the PLL is not properly connected on instance \"emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[0\].gpll\". The LOCKED port on the PLL should be connected when the FBOUTCLK port is connected. Although it is unnecessary to connect the LOCKED signal, any logic driven off of an output clock of the PLL will not know when the PLL is locked and ready." { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Inferred RAM node \"emu:emu\|rom_map_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "*" { } { } 0 10268 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "Vip.vip: Module dependency loop involving: \"HPS\"" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_common_frame_counter.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_cvo_mode_banks.sv" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "altera_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "altera_cyclonev_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "altera_pll_reconfig_core.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "genlock_enable_sync" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "u_calculate_mode" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "mode_banks" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "RST port on the PLL is not properly connected" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_cvo_core.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_packet_transfer.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_common_dc_mixed_widths_fifo.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "vip_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
|
{ "" "" "" "alt_vip_dil_scheduler.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|