Files
u-boot/board
Matt Sealey ff9ab7c2e4 efikamx: remove drive strength function and roll its functionality into the DCD
Efika MX boards configure their DDR pad settings twice, one in the DCD generated
from imximage_*.cfg and again in init_drive_strength called before relocation.

Rather than doing this, roll the changes it makes into the DCD so DDR is set up
before a single line of code in U-Boot is run.

The settings are identical with this DCD block which is shorter (by 7 entries)
than the old one, and after the output of init_drive_strength since a lot of the
functionality in the existing DCD and init_drive_strength function was just
setting the POR defaults. This goes to explain some now-missing entries.

Several hundred rounds of mtest have been run to test the settings before and
after to confirm DDR is stable and no ill-effects have been found.

Signed-off-by: Matt Sealey <matt@genesi-usa.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:29 +02:00
..
2011-10-15 22:20:36 +02:00
2011-11-27 19:44:21 +01:00
2011-03-27 19:18:37 +02:00
2010-12-09 10:25:56 +01:00
2012-02-12 15:03:25 -05:00
2011-10-15 22:20:36 +02:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2012-03-28 23:41:18 +02:00
2012-04-01 21:37:53 +10:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2011-11-27 19:44:21 +01:00
2012-09-01 14:58:29 +02:00
2012-02-27 21:19:25 +01:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2012-03-26 23:09:23 +02:00
2012-09-01 14:58:27 +02:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2010-11-28 21:45:32 +01:00
2012-02-12 15:03:25 -05:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2012-09-01 14:58:19 +02:00
2011-10-15 22:20:36 +02:00
2012-03-30 07:43:33 +02:00