Files
u-boot/doc
Patrick Delaunay febabe3ed4 dfu: allow to manage DFU on several devices
Add support of DFU for several interface/device
with one command.

The format for "dfu_alt_info" in this case is :
- <interface> <dev>'='alternate list (';' separated)
- each interface is separated by '&'

The previous behavior is always supported.

One example for NOR (bootloaders) + NAND (rootfs in UBI):

U-Boot> env set dfu_alt_info \
"sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
u-boot-env part 0 3&nand 0=UBI partubi 0,3"

U-Boot> dfu 0 list

DFU alt settings list:
dev: SF alt: 0 name: spl layout: RAW_ADDR
dev: SF alt: 1 name: ssbl layout: RAW_ADDR
dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
dev: NAND alt: 3 name: UBI layout: RAW_ADDR

U-Boot> dfu 0

$> dfu-util -l

Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=3, name="UBI", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=0, name="spl", serial="002700333338511934383330"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
..
2019-09-05 23:18:52 +02:00
2019-10-11 19:05:14 -04:00
2019-10-08 09:41:27 +02:00
2019-10-16 18:09:26 -04:00
2016-03-22 12:16:16 -04:00
2017-07-06 16:17:19 -04:00
2018-11-26 08:25:33 -05:00
2018-04-27 14:54:49 -04:00
2019-01-09 07:13:31 -05:00
2018-01-22 16:43:30 -05:00
2017-06-29 21:30:16 -04:00
2016-02-06 12:00:59 +01:00
2019-08-11 19:27:41 -04:00
2016-02-06 12:00:59 +01:00
2015-12-05 18:22:21 -05:00
2018-11-14 09:16:28 -08:00

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
	UBOOT #help

	zfsload- load binary file from a ZFS file system
	zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
	zfsls <interface> <dev[:part]> [POOL/@/dir/file]
	For example:
	UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
	zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
	For example:
	UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.