Stefan Agner 79d867c2e6 usb: ehci-mx6: allow board_ehci_hcd_init to fail ...

There could be runtime determined board specific reason why a EHCI
initialization fails (e.g. ENODEV if a Port is not available). In
this case, properly return the error code.
While at it, that function (board_ehci_hcd_init) has actually two
documentation blocks... Use the correct function name for the
documentation block of board_usb_phy_mode.

Signed-off-by: Stefan Agner <stefan@agner.ch>

2016-05-06 18:33:26 +02:00

..

dwc2.c

usb: dwc2: Init desc_before_addr

2016-05-03 19:21:18 +02:00

dwc2.h

usb: dwc2: disable erroneous overcurrent condition

2016-03-05 02:21:36 +01:00

ehci-armada100.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-atmel.c

drivers: usb: atmel: clean up the UTMI PLL code

2016-02-18 21:34:41 +01:00

ehci-exynos.c

usb: host: ehci: samsung: Move hcor initialization after usb phy setup

2015-12-17 21:54:41 +01:00

ehci-faraday.c

dm: usb: Drop the EHCI weak functions

2015-04-18 11:11:24 -06:00

ehci-fsl.c

drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file

2016-04-10 17:18:42 +02:00

ehci-generic.c

usb: ehci: Use map_physmem in ehci-generic

2016-02-24 19:12:32 +01:00

ehci-hcd.c

usb: ehci-hcd: Fix crash when no ops are provided to ehci_register()

2016-04-10 17:18:42 +02:00

ehci-marvell.c

usb: ehci-marvell.c: Add DM support

2015-10-21 02:25:01 +02:00

ehci-mpc512x.c

ehci-ci.h: drop generic USBCMD fields

2016-04-01 17:18:11 -04:00

ehci-msm.c

ehci: Add support for Qualcomm EHCI

2016-04-01 17:18:11 -04:00

ehci-mx5.c

usb: Rename ehci-fsl.h to ehci-ci.h

2016-04-01 17:18:10 -04:00

ehci-mx6.c

usb: ehci-mx6: allow board_ehci_hcd_init to fail

2016-05-06 18:33:26 +02:00

ehci-mxc.c

usb: Rename ehci-fsl.h to ehci-ci.h

2016-04-01 17:18:10 -04:00

ehci-mxs.c

usb: ehci: mxs: Add board-specific callbacks

2014-09-29 09:02:16 +02:00

ehci-omap.c

usb: ehci-omap: Reset the USB Host OMAP module

2013-12-06 07:02:32 -05:00

ehci-pci.c

dm: usb: Add a compatible string for PCI EHCI controller

2016-01-24 12:07:19 +08:00

ehci-ppc4xx.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-rmobile.c

usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT

2014-11-07 16:32:02 +01:00

ehci-spear.c

usb: spear: Add support for both SPEAr600 EHCI controllers

2015-08-19 22:30:20 +02:00

ehci-sunxi.c

sunxi: H3: Do not clear usb companion clk-gate / reset on remove

2016-04-12 08:58:03 +02:00

ehci-tegra.c

dm: Use dev_get_addr() where possible

2015-08-31 07:57:26 -06:00

ehci-vct.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-vf.c

usb: Rename ehci-fsl.h to ehci-ci.h

2016-04-01 17:18:10 -04:00

ehci-zynq.c

usb: Rename ehci-fsl.h to ehci-ci.h

2016-04-01 17:18:10 -04:00

ehci.h

ehci-hcd: Add init_after_reset

2016-04-01 17:18:08 -04:00

isp116x-hcd.c

include: move various macros to include/linux/kernel.h

2014-11-20 11:28:25 -05:00

isp116x.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Kconfig

ehci: Add support for Qualcomm EHCI

2016-04-01 17:18:11 -04:00

Makefile

ehci: Add support for Qualcomm EHCI

2016-04-01 17:18:11 -04:00

ohci-at91.c

drivers: usb: ohci-at91: clean up the PLLB code

2016-02-18 21:34:41 +01:00

ohci-da8xx.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ohci-ep93xx.c

arm: ep9315: Return back Cirrus Logic EDB9315A board support

2014-07-04 23:45:48 +02:00

ohci-generic.c

usb: add support of generic OHCI devices

2015-12-17 21:54:41 +01:00

ohci-hcd.c

ohci: Add missing cache-flush for hcca area

2015-11-03 17:29:33 +01:00

ohci-lpc32xx.c

usb: ohci-lpc32xx: Use shared wait_for_bit

2016-01-25 10:39:49 -05:00

ohci-s3c24xx.c

include: move various macros to include/linux/kernel.h

2014-11-20 11:28:25 -05:00

ohci-s3c24xx.h

dm: Move s3c24xx USB driver to a proper place

2012-10-18 06:54:18 +02:00

ohci-sunxi.c

sunxi: H3: Do not clear usb companion clk-gate / reset on remove

2016-04-12 08:58:03 +02:00

ohci.h

usb: ohci: enable cache support

2015-08-12 20:47:48 -04:00

r8a66597-hcd.c

Move console definitions into a new console.h file

2015-11-19 20:27:50 -07:00

r8a66597.h

usb: Update some EHCI driver licenses to use SPDX

2015-07-21 17:39:38 -06:00

sl811-hcd.c

usb: add enum usb_init_type parameter to usb_lowlevel_init

2013-10-20 23:45:26 +02:00

sl811.h

drivers/usb: regorganisation

2009-04-06 20:40:46 +02:00

usb-sandbox.c

usb: sandbox: Add support for interrupt operations

2015-11-19 20:27:52 -07:00

usb-uclass.c

dm: usb: Unbind old block devices when shutting down USB

2016-03-17 21:27:39 -06:00

utmi-armada100.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

xhci-dwc3.c

usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook

2015-12-07 00:15:00 +01:00

xhci-exynos5.c

dm: Use dev_get_addr() where possible

2015-08-31 07:57:26 -06:00

xhci-fsl.c

usb: xhci: fsl: Removing unused function usb_phy_reset

2015-12-07 00:15:00 +01:00

xhci-keystone.c

usb: xhci: keystone: Remove common dwc3 drv functions calls

2015-07-22 08:55:44 +02:00

xhci-mem.c

dm: usb: Support driver model in XHCI

2015-04-18 11:11:28 -06:00

xhci-omap.c

usb: host: xhci-omap: fix build break

2015-12-07 00:14:59 +01:00

xhci-pci.c

usb: pci: Add XHCI driver for PCI

2015-02-05 22:16:42 -07:00

xhci-ring.c

dm: usb: xhci: Use a function to get xhci_ctrl

2015-04-18 11:11:28 -06:00

xhci-uniphier.c

ARM: UniPhier: replace <asm/io.h> with <linux/io.h>

2015-05-31 02:53:56 +09:00

xhci-zynqmp.c

usb: xhci: zynqmp: Removing unused function usb_phy_reset

2015-12-07 00:15:00 +01:00

xhci.c

usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION.

2016-03-20 18:00:45 +01:00

xhci.h

dm: usb: Support driver model in XHCI

2015-04-18 11:11:28 -06:00