Peng Fan 8df42bee0e misc: mxc_ocotp: check fuse word before programming on i.MX7ULP ...

On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to
write once, because they use ECC mode. Multiple writes may damage
the ECC value and cause a wrong fuse value decoded when reading.
This patch adds a checking before the fuse word programming, only
can write when the word value is 0.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

2018-01-12 14:28:04 +01:00

..

adc

treewide: replace with error() with pr_err()

2017-10-04 11:59:44 -04:00

ata

ata: Migrate CONFIG_MVSATA_IDE to Kconfig

2017-12-12 18:16:06 -05:00

bios_emulator

printk: collect printk stuff into <linux/printk.h> with loglevel support

2017-10-04 10:31:17 -04:00

block

dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()

2017-12-12 19:53:45 -07:00

bootcount

bootcount: add support for bootcounter on EXT filesystem

2017-11-20 09:58:31 +01:00

clk

board: stm32f429-disco: switch to DM STM32 clock driver

2018-01-10 08:05:46 -05:00

core

dm: core: Correct address cast in dev_read_addr_ptr()

2017-11-16 18:45:05 -07:00

cpu

dm: core: Update device_bind_driver_to_node() to use ofnode

2017-06-01 07:03:08 -06:00

crypto

crypto/fsl: fix BLOB encapsulation and decapsulation

2018-01-08 08:26:03 -05:00

ddr

armv8: ls1088a: Add NXP LS1088A SoC support

2017-09-11 08:00:13 -07:00

demo

dm: core: Replace of_offset with accessor

2017-02-08 06:12:14 -07:00

dfu

treewide: replace with error() with pr_err()

2017-10-04 11:59:44 -04:00

dma

treewide: replace with error() with pr_err()

2017-10-04 11:59:44 -04:00

firmware

drivers: firmware: psci: use pr_* log functions instead of printf()

2017-12-04 10:23:53 -05:00

fpga

fpga: allow programming fpga from FIT image for all FPGA drivers

2017-12-14 16:09:39 +01:00

gpio

board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver

2018-01-10 08:05:46 -05:00

i2c

i2c: at91_i2c: remove the .probe_chip function

2017-12-07 09:29:19 +01:00

input

env: Rename getenv/_f() to env_get()

2017-08-16 08:30:24 -04:00

led

dm: core: Update device_bind_driver_to_node() to use ofnode

2017-06-01 07:03:08 -06:00

mailbox

dm: mailbox: Update uclass to support livetree

2017-06-01 07:03:15 -06:00

memory

…

misc

misc: mxc_ocotp: check fuse word before programming on i.MX7ULP

2018-01-12 14:28:04 +01:00

mmc

mmc: uniphier-sd: Add R8A77995 D3 compatible

2017-12-09 13:36:26 +01:00

mtd

mtd: nand: mxs_nand_spl: Remove nand size print

2018-01-08 17:37:12 +01:00

net

Merge git://git.denx.de/u-boot-fsl-qoriq

2018-01-11 11:18:49 -05:00

nvme

nvme: Remove dead codes in nvme_setup_io_queues()

2017-09-03 15:30:34 -04:00

pch

dm: Use dm_scan_fdt_dev() directly where possible

2016-07-27 14:15:54 -06:00

pci

PCI: Drop CONFIG_TSI108_PCI

2018-01-10 08:05:49 -05:00

pcmcia

Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driver

2017-08-11 15:41:51 -04:00

phy

sti: fix STMicroelectronics copyright

2017-11-06 09:51:01 -05:00

pinctrl

Merge git://git.denx.de/u-boot-marvell

2018-01-10 08:05:57 -05:00

power

power: tps65910: replace error() by pr_err()

2018-01-01 09:04:19 -05:00

pwm

pwm: imx: Enable PWM support on i.MX53

2017-11-20 09:58:31 +01:00

qe

blk: Remove various places that do flush cache after read

2017-09-15 08:05:10 -04:00

ram

ram: stm32: add memory mapping selection support

2018-01-10 08:05:47 -05:00

remoteproc

dm: core: Replace of_offset with accessor

2017-02-08 06:12:14 -07:00

reset

rockchip: reset: support a (common) rockchip reset drivers

2018-01-09 11:13:32 +01:00

rtc

rtc: add support for s35392a

2017-11-20 09:58:31 +01:00

scsi

blk: dm: make blk_create_device() take a number of block instead of a size

2017-09-11 21:43:58 -06:00

serial

board: stm32f429-disco: switch to DM STM32 serial driver

2018-01-10 08:05:46 -05:00

soc

…

sound

dm: gpio: Add live tree support

2017-06-01 07:03:10 -06:00

spi

cosmetic: atcspi200: Rename function name as atcspi200

2017-11-30 09:45:21 +08:00

spmi

drivers: spmi-msm: fix scanning for peripherals

2017-12-12 21:33:38 -05:00

sysreset

dm: reset: have the reset-command perform a COLD reset

2017-12-12 19:53:45 -07:00

thermal

thermal: ti-bandgap: Add support for temperature sensor

2017-11-21 08:03:38 -05:00

timer

atcpit100: timer: Remove arch dependency.

2017-11-30 09:39:31 +08:00

tpm

tpm: st33zp24: fix STMicroelectronics copyright

2017-11-06 09:51:01 -05:00

usb

usb: rockchip: add the rockusb gadget

2018-01-10 11:11:05 +01:00

video

am335x-fb: setup display PLL

2018-01-11 15:19:12 +01:00

watchdog

wdt: Update uclass to make clear that the timeout is in ms

2017-08-13 15:17:34 -04:00

Kconfig

bootcount: add support for bootcounter on EXT filesystem

2017-11-20 09:58:31 +01:00

Makefile

thermal: ti-bandgap: Add support for temperature sensor

2017-11-21 08:03:38 -05:00