Peng Fan
d239d9d946
imx: add i.MX8MN DDR4 board support
Support pinctrl/clk/sdhc, include ddr4 timing data.
Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
CPU: Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM: 2 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
..
2019-11-01 16:45:40 +03:00
2019-11-05 10:27:18 +01:00
2019-08-11 16:43:41 -04:00
2019-10-24 13:37:03 +02:00
2019-10-25 17:20:44 +02:00
2019-08-11 16:43:41 -04:00
2019-08-28 13:47:47 +05:30
2019-10-18 09:04:19 +08:00
2019-11-01 09:34:35 -04:00
2019-09-14 21:28:55 +02:00
2019-11-03 07:20:29 +08:00
2019-08-11 16:43:41 -04:00
2019-09-02 17:38:43 +02:00