Files
u-boot/drivers
Pali Rohár a29eb319a3 mmc: fsl_esdhc: Set fallback mode to 1-bit
8-bit mode is not supported by SD cards and on P2020 are four SDHC pins
shared with SPI (so if P2020 board have also SPI then only 4-bit SDHC mode
is provided). So 8-bit SDHC mode is really bad default.

When max bus width is not provided then set mode to 1-bit. This mode is
supported by all cards, so it is the best option for fallback mode.

Also P2020 bootrom sets mode to 1-bit when booting from SD/MMC card.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-06-20 15:52:44 +08:00
..
2022-04-25 09:25:00 +02:00
2022-05-02 09:58:13 -04:00
2021-10-05 08:50:15 -04:00
2022-01-13 07:57:49 -05:00
2022-04-28 09:26:44 -04:00
2022-06-20 09:18:25 +08:00
2022-01-13 07:57:49 -05:00
2022-06-08 13:59:52 -04:00
2022-06-10 13:37:32 -04:00
2022-06-08 14:00:22 -04:00
2022-05-02 09:58:13 -04:00
2022-05-03 21:39:22 +02:00
2022-06-06 12:09:12 -04:00
2021-10-01 21:08:18 -04:00
2021-10-31 08:46:44 -04:00