Peng Fan
86ac7a9a5d
imx: add i.MX8MQ EVK support
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
DRAM.
The boot log with Arm trusted firmware console enabled:
"
U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
PMIC: PFUZE100 ID=0x10
Normal Boot
Trying to boot from MMC2
NOTICE: Configureing TZASC380
NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
NOTICE: BL31: Built : 09:28:54, Nov 8 2018
lpddr4 swffc start
NOTICE: sip svc init
U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Freescale i.MX8MQ EVK
DRAM: 3 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@30be0000 using MAC address from ROM
eth0: ethernet@30be0000
Hit any key to stop autoboot: 0
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-01 14:12:18 +01:00
..
2018-12-03 14:26:18 +03:00
2019-01-01 14:12:18 +01:00
2018-09-16 00:01:13 +02:00
2018-09-10 20:48:16 -04:00
2018-12-10 18:47:13 +01:00
2018-11-26 13:57:31 +08:00
2018-06-18 14:43:12 -04:00
2018-12-05 15:06:24 -05:00
2018-12-05 14:14:16 +08:00
2018-12-10 07:15:12 -05:00
2018-11-18 16:02:23 +01:00
2018-12-10 10:14:42 +08:00
2018-09-25 21:49:18 -04:00
2018-11-26 08:25:33 -05:00