d58c007498
Microblaze is using NEEDS_MANUAL_RELOC from the beginnging. This is causing issues with function pointer arrays which need to be updated manually after relocation. Building code with -fPIC and linking with -pic will remove this limitation and there is no longer need to run manual update. By default still old option is enabled but by disabling NEEDS_MANUAL_RELOC code will be compiled for full relocation. The patch does couple of things which are connected to each other. - Define STATIC_RELA dependency to call relocate-rela to fill sections. - REMAKE_ELF was already enabled but u-boot file can't be used because sections are empty. relocate-rela will fill them and output file is u-boot.elf which should be used. - Add support for full relocation (u-boot.elf) - Add support for early relocation when u-boot.bin is loaded to different address then CONFIG_SYS_TEXT_BASE - Add rela.dyn and dynsym sections Disabling NEEDS_MANUAL_RELOC U-Boot size increased by 10% of it's original size (550kB to 608kB). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a845670b34925859b2e321875f7588a29f6655f9.1655299267.git.michal.simek@amd.com
11 lines
276 B
Makefile
11 lines
276 B
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2000-2006
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
extra-y = start.o
|
|
obj-y = irq.o
|
|
obj-y += interrupts.o cache.o exception.o timer.o
|
|
obj-$(CONFIG_STATIC_RELA) += relocate.o
|
|
obj-$(CONFIG_SPL_BUILD) += spl.o
|