Files
u-boot/board
Dan Murphy 7d47d1caa0 arm: omap4: panda: Add reading of the board revision
Detect if we are running on a panda revision A1-A6,
or an ES panda board. This can be done by reading
the level of GPIOs and checking the processor revisions.
This should result in:
Panda 4430:
     GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
     GPIO171, GPIO101, GPIO182: 1 0 1 => A6
Panda ES:
     GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
     GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3

Set the board name appropriately for the board revision that
is detected.

Update the findfdt macro to load the a4 device tree binary.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
[trini: %s/CONTROL_PADCONF_CORE/(*ctrl)->control_padconf_core_base/ and
 formatting for that]
Signed-off-by: Tom Rini <trini@ti.com>
2013-06-18 10:43:30 -04:00
..
2011-11-27 19:44:21 +01:00
2013-04-01 16:33:52 -04:00
2010-12-09 10:25:56 +01:00
2013-05-21 11:54:16 +02:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2012-02-12 15:03:25 -05:00
2011-10-15 22:20:36 +02:00
2013-02-08 22:32:38 -05:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2013-05-05 17:55:05 +02:00
2013-04-01 16:33:52 -04:00
2011-10-15 22:20:36 +02:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2013-05-05 23:47:05 +02:00
2013-03-09 08:22:57 +01:00
2012-10-15 11:54:14 -07:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2012-03-26 23:09:23 +02:00
2013-04-22 09:53:53 +02:00
2013-04-01 16:33:52 -04:00
2011-10-15 22:20:36 +02:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2010-11-28 21:45:32 +01:00
2012-02-12 15:03:25 -05:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2012-10-04 16:59:13 +02:00
2013-05-05 17:55:03 +02:00
2011-10-15 22:20:36 +02:00