Files
u-boot/board
Patrice Chotard 395f12976c Board: stm32mp1: Add supply current boot information
For DK1/DK2 boards, check if power supply provides enough current
to allow the board to boot correctly.
ADC@0 channel 18 and 19 are connected to USB type-C CC1 and CC2
signals. The table below shows the behavior for different range of
CC1 or CC2:

  range       | power supply | red led |          console message
  (Volts)     |   (Amps)     | blinks  |
--------------|--------------|---------|-----------------------------------
[2.10 - 1.23[ |     3        |   NO    |    NO
[1.23 - 0.66[ |     1.5      | 3 times | WARNING 1.5A power supply detected
[0.66 - 0]    |     0.5      | 2 times | WARNING 500mA power supply detected

If detected current is < 3A, red led is kept ON after blinking.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
..
2019-04-08 09:45:08 +08:00
2018-11-26 13:57:31 +08:00
2019-02-19 08:55:43 -05:00
2018-12-03 10:44:10 -05:00
2019-04-08 09:44:26 +08:00
2019-01-01 14:12:18 +01:00
2018-11-27 21:06:53 +05:30
2019-02-01 14:09:31 +01:00
2018-09-10 21:19:31 -04:00
2019-03-14 09:38:41 +09:00
2019-04-08 09:44:26 +08:00
2019-02-18 14:46:53 +05:30