Files
u-boot/include/configs
Kumar Gala 72c96a6802 tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII
The following commit:

commit 46e91674fb
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 3 17:52:07 2009 -0600

    tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode

Removed setting Auto-Neg by default, however this is believed to be
proper default configuration for initialization of the TBI interface.

Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
Auto-Neg to be disabled to function properly.

This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
with an SGMII riser card.  We also remove setting
CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
default setting is sufficient for them.

Additionally, we clean up the code a bit to remove an unnecessary second
define.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
2010-12-13 09:32:15 -06:00
..
2010-10-27 22:48:30 +02:00
2010-10-27 22:48:30 +02:00
2010-11-26 21:12:52 +01:00
2010-11-27 23:35:08 +01:00
2010-11-27 23:35:08 +01:00
2010-11-27 23:35:14 +01:00
2010-10-27 22:48:30 +02:00
2010-10-27 22:48:30 +02:00
2010-11-19 16:29:02 -05:00
2010-11-30 08:45:25 +09:00
2010-10-27 22:48:30 +02:00
2010-11-27 23:35:08 +01:00
2010-11-30 08:45:19 +09:00
2010-12-07 16:36:41 +01:00