Files
u-boot/drivers
Haibo Chen 5d772196d9 mmc: fsl_esdhc_imx: optimize the timing setting
For imx usdhc/esdhc, once set the DDR_EN, enable the DDR mode, the
card clock will be divied by 2 automatically by the host. So need
to first config the DDR_EN correctly, then update the card clock.
This will make sure the actual card clock is as our expected.
IC also suggest config the DDR_EN firstly, then config the clock
divider.

For HS400/HS400ES mode, need to config the strobe dll, this need
to based on the correct target clock rate, so need to do this after
clock rate is update.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:37 +01:00
..
2020-08-03 22:19:54 -04:00
2020-11-30 13:14:43 -07:00
2020-07-27 14:16:29 +05:30
2020-10-22 11:26:14 -04:00
2020-05-18 21:19:18 -04:00
2020-11-25 12:01:53 +01:00
2020-10-22 09:54:54 -04:00
2020-11-06 09:51:29 +08:00
2020-10-16 09:44:27 -04:00
2020-11-06 10:18:20 +08:00
2020-11-20 10:42:54 +01:00
2020-08-03 22:19:54 -04:00
2020-08-24 14:11:31 -04:00
2020-11-06 10:18:20 +08:00
2020-11-06 10:18:20 +08:00