Files
u-boot/include
Patrick Delaunay b0cc1b846f dm: spi: Read default speed and mode values from DT
This patch update the behavior introduced by
commit 96907c0fe5 ("dm: spi: Read default speed and mode values from DT")

In case of DT boot, don't read default speed and mode for SPI from
CONFIG_* but instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies and SPI modes.

Remove also use in boards of the value speed=0 (no more supported)
for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0.

DT values will be always used when available (full DM support of
SPI slave with available DT node) even if speed and mode are requested;
for example in splash screen support (in splash_sf_read_raw)
or in SPL boot (in spl_spi_load_image).
The caller of spi_get_bus_and_cs() no more need to force speed=0.

But the current behavior don't change if the SPI slave is not
present (device with generic driver is created automatically)
or if platdata is used (CONFIG_OF_PLATDATA).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 11:54:50 +05:30
..
2019-02-19 16:58:24 -05:00
2018-11-27 21:06:53 +05:30
2018-11-14 09:16:27 -08:00
2018-09-29 11:49:35 -06:00
2019-02-13 09:40:05 +01:00
2018-09-10 20:48:16 -04:00
2018-12-07 08:13:45 -05:00
2018-12-07 08:13:45 -05:00
2018-07-26 14:08:22 -05:00
2018-09-23 21:55:30 +02:00
2019-02-20 15:27:09 +08:00
2018-06-13 07:49:12 -04:00
2018-12-06 23:26:32 -05:00
2019-02-09 12:50:22 -07:00
2019-01-01 14:12:18 +01:00
2018-10-22 13:01:27 +02:00
2019-01-01 14:12:18 +01:00
2019-02-09 07:50:58 -05:00
2018-12-05 06:01:35 -07:00
2019-02-02 08:19:17 -05:00
2018-09-18 00:01:18 -06:00
2018-10-02 22:12:32 +05:30
2019-01-24 11:35:30 -06:00
2018-10-09 04:40:27 -06:00
2019-01-18 22:19:09 +05:30
2018-12-05 06:06:44 -07:00
2018-10-07 11:04:01 -04:00
2018-07-19 16:31:37 -04:00
2019-02-01 16:59:12 +01:00
2018-07-20 15:55:05 -04:00
2018-10-09 04:40:27 -06:00
2018-09-28 18:26:32 +02:00