Files
u-boot/cmd
Patrick Delaunay b0cc1b846f dm: spi: Read default speed and mode values from DT
This patch update the behavior introduced by
commit 96907c0fe5 ("dm: spi: Read default speed and mode values from DT")

In case of DT boot, don't read default speed and mode for SPI from
CONFIG_* but instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies and SPI modes.

Remove also use in boards of the value speed=0 (no more supported)
for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0.

DT values will be always used when available (full DM support of
SPI slave with available DT node) even if speed and mode are requested;
for example in splash screen support (in splash_sf_read_raw)
or in SPL boot (in spl_spi_load_image).
The caller of spi_get_bus_and_cs() no more need to force speed=0.

But the current behavior don't change if the SPI slave is not
present (device with generic driver is created automatically)
or if platdata is used (CONFIG_OF_PLATDATA).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 11:54:50 +05:30
..
2017-02-08 15:56:28 -05:00
2018-08-11 09:16:08 +02:00
2017-07-03 17:35:28 -04:00
2018-05-23 17:30:05 -04:00
2018-12-04 19:44:57 +01:00
2018-09-25 21:49:18 -04:00
2019-02-19 08:55:43 -05:00
2018-09-23 21:55:30 +02:00
2018-09-11 11:00:54 +02:00
2019-02-25 12:47:13 +01:00
2017-08-16 08:30:24 -04:00
2016-10-06 20:57:42 -04:00
2018-09-28 18:27:33 +02:00
2018-11-16 16:51:56 -05:00
2018-05-08 09:07:35 -04:00
2019-03-25 17:36:53 -04:00
2019-01-15 15:28:44 -05:00
2019-01-15 15:28:44 -05:00
2019-01-15 15:28:44 -05:00
2018-09-28 20:22:36 -04:00
2018-07-02 14:14:20 -05:00
2019-01-15 15:28:44 -05:00