eaw/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Files
51d558392bc71f9cfb58ce5ea70975dee6bf6292
u-boot/arch/arm/include/asm
History
Vikas Manocha 54afb50025 stv0991: configure clock & pad muxing for qspi 
stv0991 has cadence qspi controller for flash interfacing, this
patch configures the device pads & clock for the controller.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-03 13:50:53 +05:30
..
arch-am33xx
arm: am437x: mux: Update mux names
2015-04-23 14:56:07 -04:00
arch-armada100
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
arch-armv7
…
arch-bcm281xx
bcm281xx: add support for "USB OTG clock"
2014-12-29 16:31:23 -05:00
arch-bcmcygnus
arm: add Cygnus and NSP boards
2014-08-30 07:46:40 -04:00
arch-bcmnsp
arm: add Cygnus and NSP boards
2014-08-30 07:46:40 -04:00
arch-ep93xx
arm: ep9315: Return back Cirrus Logic EDB9315A board support
2014-07-04 23:45:48 +02:00
arch-exynos
arm: exynos: USB3 PHY base definition for Exynos5 SoCs
2015-06-08 15:25:41 +02:00
arch-fsl-lsch3
ls2085a: esdhc: Add esdhc support for ls2085a
2015-04-23 16:46:51 -07:00
arch-imx
i2c, mxc: rework i2c base address names for different SoCs
2015-05-26 14:17:00 +02:00
arch-lpc32xx
lpc32xx: add support for board work_92105
2015-04-10 14:23:39 +02:00
arch-ls102xa
arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h
2015-05-20 10:34:09 -07:00
arch-mvebu
arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h
2014-10-23 09:59:20 -04:00
arch-mx5
mx5: fix get_reset_cause
2015-03-05 10:29:27 +01:00
arch-mx6
arm, imx6, i2c: add I2C4 for MX6DL
2015-05-26 14:16:54 +02:00
arch-mx25
i2c, mxc: rework i2c base address names for different SoCs
2015-05-26 14:17:00 +02:00
arch-mx27
i2c, mxc: rework i2c base address names for different SoCs
2015-05-26 14:17:00 +02:00
arch-mx31
arm: mx31: use common timer functions
2014-09-16 12:51:46 +02:00
arch-mx35
arm: mx35: use common timer functions
2014-09-16 12:53:09 +02:00
arch-mxs
arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
2015-02-10 12:48:50 +01:00
arch-omap3
ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:33 -04:00
arch-omap4
ARM: OMAP: Change set_pl310_ctrl_reg to be generic
2015-03-13 09:28:55 -04:00
arch-omap5
ARM: DRA7: CPSW: Remove IO delay hack
2015-06-12 13:02:06 -04:00
arch-orion5x
edminiv2: switch to SPL
2015-02-25 07:59:50 +01:00
arch-pxa
…
arch-rmobile
arm: rmobile: alt: Update to QoS revision 0.31 and 0.321
2015-06-01 08:56:34 +09:00
arch-s3c24x0
mtd: nand: s3c: Unify the register definition and naming
2014-11-26 23:21:43 -06:00
arch-s5pc1xx
dm: exynos: gpio: Convert to driver model
2014-10-22 10:36:36 -06:00
arch-sa1100
…
arch-spear
…
arch-stm32f1
ARMv7M: add STM32F1 support
2015-05-28 08:18:24 -04:00
arch-stm32f4
stm32f4: add serial print port
2015-05-10 07:29:38 -04:00
arch-stv0991
stv0991: configure clock & pad muxing for qspi
2015-07-03 13:50:53 +05:30
arch-sunxi
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
arch-tegra
tegra: Allow board-specific init
2015-06-09 09:56:15 -07:00
arch-tegra20
tegra: Move display controller header into common
2015-05-13 09:24:10 -07:00
arch-tegra30
ARM: ARM720t: remove empty asm/arch/hardware.h
2015-04-23 08:52:27 -04:00
arch-tegra114
ARM: ARM720t: remove empty asm/arch/hardware.h
2015-04-23 08:52:27 -04:00
arch-tegra124
tegra: Add missing tegra124 peripherals
2015-06-09 09:56:14 -07:00
arch-tegra210
ARM: tegra: pinmux: add Tegra210 support
2015-03-04 10:09:02 -07:00
arch-u8500
…
arch-vf610
colibri_vf: Enable board specific USB initialisation for USB pen gpio
2015-06-08 08:41:56 +02:00
arch-zynqmp
zynqmp: Enable SDHCI0 options
2015-04-29 11:19:04 +02:00
armv8
armv8/fsl-lsch3: Change normal memory shareability
2015-02-24 13:08:22 -08:00
imx-common
dm: gpio: vf610: Add GPIO driver support
2015-06-08 08:41:54 +02:00
iproc-common
arm: add Cygnus and NSP boards
2014-08-30 07:46:40 -04:00
kona-common
bcm281xx: add support for "USB OTG clock"
2014-12-29 16:31:23 -05:00
proc-armv
ARM: add missing HYP mode constant
2014-07-28 17:06:35 +02:00
ti-common
dma: ti-edma3: introduce edma3 driver
2014-10-23 11:27:29 -04:00
armv7.h
virt-dt: Allow reservation of secure region when in a RAM carveout
2015-05-13 09:24:14 -07:00
armv7m.h
ARM: Add ARMv7-M support
2015-04-22 12:14:55 -04:00
assembler.h
arm: build arch memset/memcpy in Thumb2 mode
2015-01-09 10:20:22 -05:00
atomic.h
Remove ${objtree}/include/asm/proc/ link
2014-06-11 16:27:05 -04:00
bitops.h
arm: implement find_next_zero_bit function
2015-04-16 09:31:14 +02:00
bootm.h
…
byteorder.h
…
cache.h
ARM: cache_v7: use __weak
2014-07-04 19:57:22 +02:00
config.h
ARMv8: enable pre-allocation malloc
2015-03-27 16:28:58 +01:00
davinci_rtc.h
…
dma-mapping.h
arm: asm: dma-mapping: added dma_free_coherent API
2015-04-14 05:48:09 +02:00
ehci-omap.h
…
emif.h
am33xx: Re-enable SW levelling for DDR2
2015-06-15 10:57:26 -04:00
errno.h
…
fsl_secure_boot.h
Add bootscript support to esbc_validate.
2015-04-21 10:19:19 -07:00
gic.h
arm64 patch: gicv3 support
2014-04-08 00:15:12 +02:00
global_data.h
armv8/fsl-lsch3: Add support for second DDR clock
2015-02-24 13:09:14 -08:00
gpio.h
…
hardware.h
…
io.h
arm: ls102xa: Add Freescale LS102xA SoC support
2014-09-08 10:30:32 -07:00
linkage.h
…
mach-types.h
davinci: add support for omapl138-lcdk board
2015-04-23 13:58:43 -04:00
macro.h
Armv8: Initializing CNTVOFF_EL2
2015-04-16 11:27:15 +02:00
memory.h
…
omap_boot.h
…
omap_common.h
ARM: BeagleBoard-x15: Enable i2c5 clocks
2015-06-15 10:57:26 -04:00
omap_gpio.h
dm: omap: gpio: Support driver model
2014-10-23 19:29:07 -06:00
omap_mmc.h
…
omap_musb.h
…
pl310.h
mx6: Set shared override bit in PL310 AUX_CTRL register
2015-05-15 19:21:24 +02:00
posix_types.h
…
processor.h
Remove ${objtree}/include/asm/proc/ link
2014-06-11 16:27:05 -04:00
psci.h
ARM: Add board-specific initialization hook for PSCI
2015-05-13 09:24:15 -07:00
ptrace.h
Remove ${objtree}/include/asm/proc/ link
2014-06-11 16:27:05 -04:00
sections.h
…
secure.h
ARM: HYP/non-sec: allow relocation to secure RAM
2014-07-28 17:19:09 +02:00
setup.h
…
spl.h
arm: spl: Avoid setting up a duplicate global data structure
2015-03-04 14:55:04 -05:00
string.h
…
system.h
arm: Add a prototype for save_boot_params_ret()
2015-05-14 18:49:34 -06:00
types.h
include: asm: types: add resource_size_t type
2015-04-14 05:48:09 +02:00
u-boot-arm.h
common: Move dram_init() declaration to common location
2015-02-09 15:08:48 +01:00
u-boot.h
break build if it would produce broken binary
2015-04-13 10:52:51 -04:00
unaligned.h
…
utils.h
…