Files
u-boot/drivers
Johannes Schneider 25b7ce3287 serial: mxc: enable the RX pipeline
on imx8(mm) the RXDMUXSEL needs to be set for data going over the wire
(as observable on a connected 'scope) to actually make it into the
RXFIFO

the reference manual is not overly clear about this, and only
mentiones that "UCR3_RXDMUXSEL should always be set." - and since the
CR3 register reverts to its reset values after setting the baudrate,
setting this bit is done during '_mxc_serial_setbgr'

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:10 +02:00
..
2022-04-25 09:25:00 +02:00
2022-08-04 16:18:47 -04:00
2022-08-04 16:18:47 -04:00
2022-08-09 08:58:27 +02:00
2022-01-13 07:57:49 -05:00
2022-09-02 13:25:01 +02:00
2022-01-13 07:57:49 -05:00
2022-09-07 13:44:55 +08:00
2022-08-26 15:00:05 -04:00
2022-09-02 13:25:01 +02:00
2022-09-03 16:59:05 +03:00
2022-05-03 21:39:22 +02:00