Files
u-boot/board
Yangbo Lu 208e1ae8d1 armv8: ls1012a: define esdhc_status_fixup for QDS board
The LS1012AQDS board has a hardware issue. When there is no eMMC
adapter card inserted in SDHC2 adapter slot, the command inhibit
bits of eSDHC2_PRSSTAT register will never release. This would cause
below continious error messages in linux since it uses polling mode
to detect card.
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
This patch is to define esdhc_status_fixup function for QDS to
disable SDHC2 status if no eMMC adapter card is detected.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-18 09:46:45 -08:00
..
2016-10-12 08:20:17 -04:00
2016-05-02 18:37:09 -04:00
2016-02-06 12:00:59 +01:00
2016-10-28 18:37:13 +02:00
2016-02-06 12:00:59 +01:00
2016-06-24 17:24:40 -04:00
2015-09-11 17:12:57 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-11-12 17:38:08 +01:00
2016-06-17 09:51:01 -04:00
2016-02-06 12:00:59 +01:00
2016-09-27 23:30:27 +02:00
2016-07-22 14:46:00 -04:00
2016-02-06 12:00:59 +01:00
2016-11-13 15:54:34 -05:00
2016-09-27 23:30:27 +02:00
2016-02-20 21:40:02 +01:00
2016-12-04 13:55:00 -05:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-10-31 10:13:16 -04:00
2016-09-07 08:48:58 -04:00
2017-01-02 17:55:58 +01:00
2016-03-27 09:13:01 -04:00