Files
u-boot/board
Jun Nie c72a23701b pico-imx7d: enable boot without PMIC
If PMIC is not probed successfully, it is still OK to boot
with default configuration although power is not optimized.

Default voltage of SW1A/SW1B is 1.1V/1.0V for PC32PF3000A1EP
on pico according to table 42 of spec of PF3000 ver 9.0.

Default mode of SW1A/SW1B is APS as expected(table 47).

Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-06-11 10:42:48 +02:00
..
2018-11-26 13:57:31 +08:00
2019-04-18 09:43:22 +03:00
2019-05-28 13:58:06 -04:00
2018-12-03 10:44:10 -05:00
2019-05-21 08:03:38 +02:00
2019-05-24 10:14:15 -07:00
2018-09-10 21:19:31 -04:00
2019-03-14 09:38:41 +09:00
2019-05-03 07:30:31 -04:00
2019-04-25 19:21:00 +02:00