4b9206ed51
* Patches by Thomas Viehweger, 16 Mar 2004: - show PCI clock frequency on MPC8260 systems - add FCC_PSMR_RMII flag for HiP7 processors - in do_jffs2_fsload(), take load address from load_addr if not set explicit, update load_addr otherwise - replaced printf by putc/puts when no formatting is needed (smaller code size, faster execution)
wdenk
2004-03-23 22:14:11 +00:00
109c0e3ad3
* Patch by Phillippe Robin, 16 Mar 2004: avoid dereferencing NULL pointer in lib_arm/armlinux.c
wdenk
2004-03-23 21:43:07 +00:00
efa329cb89
* Add start-up delay to make sure power has stabilized before attempting to switch on USB on SX1 board.
wdenk
2004-03-23 20:18:25 +00:00
7d7ce4125f
Patch by Pierre Aubert, 15 Mar 2004: Fix buffer overflow in IDE identification
wdenk
2004-03-17 01:13:07 +00:00
d9df1f4e66
* Patch by Steven Scholz, 27 Feb 2004: - Adding get_ticks() and get_tbclk() for AT91RM9200 - Many white space fixes in cpu/at91rm9200/interrupts.c
LABEL_2004_03_16_2330
wdenk
2004-03-15 09:00:01 +00:00
855a496fe9
* Patches by Travis Sawyer, 12 Mar 2004: - Fix Gigabit Ethernet support for 440GX - Add Gigabit Ethernet Support to MII PHY utilities
wdenk
2004-03-14 18:23:55 +00:00
4b248f3f71
* Patch by Pierre Aubert, 11 Mar 2004: - add bitmap command and splash screen support in cfb console - add [optional] origin in the bitmap display command
wdenk
2004-03-14 16:51:43 +00:00
aaf224ab4e
* Patch by Stephan Linz, 09 Mar 2004 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
wdenk
2004-03-14 15:20:55 +00:00
3d3befa754
* Patch by Philippe Robin, 09 Mar 2004: Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference Platform support.
wdenk
2004-03-14 15:06:13 +00:00
4d13cbad1c
* Patch by Tolunay Orkun, 5 Mar 2004: Fix early board initialization for Cogent CSB272 board
wdenk
2004-03-14 14:09:05 +00:00
c3f9d4939a
* Patch by Yuli Barcohen, 4 Mar 2004: Fix problems with GCC 3.3.x which changed handling of global variables explicitly initialized to zero (now in .bss instead of .data as before).
wdenk
2004-03-14 00:59:59 +00:00
0e6d798cb3
* Patch by Travis Sawyer, 01 Mar 2004: Ocotea: - Add IBM PPC440GX Ref Platform support (Ocotea) Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> Adapted to U-Boot and 440GX port 440gx_enet.c: - Add gracious handling of all Ethernet Pin Selections for 440GX - Add RGMII selection for Cicada CIS8201 Gigabit PHY ppc440.h: - Add needed bit definitions - Fix formatting
wdenk
2004-03-14 00:07:33 +00:00
c40b295682
* Patch by Rune Torgersen, 27 Feb 2004: - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
wdenk
2004-03-13 23:29:43 +00:00
6629d2f22b
SX1 patches: use "serial#" for USB serial #; use redundand environment storage; auto-set console on USB port (using preboot command)
wdenk
2004-03-12 15:38:25 +00:00
232c150a25
Add support for Siemens SX1 mobile phone; add support for USB-based console (enable with "setenv stdout usbtty; setenv stdin usbtty")
LABEL_2004_03_12_0130
wdenk
2004-03-12 00:14:09 +00:00
79d696fc55
Fix LOWBOOT configuration for MPC5200 with DDR memory
wdenk
2004-03-11 22:46:36 +00:00
e7c85689bb
* Patch by Travis Sawyer, 26 Feb 2004: Fix broken compile for XPEDITE1K target.
wdenk
2004-02-27 08:21:54 +00:00
132ba5fdc5
* Patch by Pierre Aubert, 26 Feb 2004 add IDE support for MPC5200
wdenk
2004-02-27 08:20:54 +00:00
11dadd547c
* Patch by Steven Scholz, 25 Feb 2004: - Timeouts in FPGA code should be based on CFG_HZ - Minor cleanup in code for Altera FPGA ACEX1K
wdenk
2004-02-27 00:07:27 +00:00
80885a9d52
* Patch by Markus Pietrek, 24 Feb 2004: NS9750 DevBoard added
wdenk
2004-02-26 23:46:20 +00:00
0c852a2886
* Patch by Rahul Shanbhag, 19 Feb 2004: Fixes for for OMAP1610 board: - shift some IRQ specific code to platform.S file - remove duplicatewatchdog reset code from start.S
wdenk
2004-02-26 23:01:04 +00:00
a084f7da88
* Patch by Masami Komiya, 24 Feb 2004: Update NetBootFileXferSize in NFS code
wdenk
2004-02-24 22:33:21 +00:00
cbd8a35c6d
* Patch by Masami Komiy, 22 Feb 2004: Add support for NFS for file download
wdenk
2004-02-24 02:00:03 +00:00
074cff0d28
* Patch by Andrea Scian, 17 Feb 2004: Add support for S3C44B0 processor and DAVE B2 board
wdenk
2004-02-24 00:16:43 +00:00
028ab6b598
* Patch by Peter Ryser, 20 Feb 2004: Add support for the Xilinx ML300 platform
wdenk
2004-02-23 23:54:43 +00:00
63e73c9a8e
* Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
wdenk
2004-02-23 22:22:28 +00:00
cd0a9de68b
* Patch by Laurent Mohin, 10 Feb 2004: Fix buffer overflow in common/usb.c
wdenk
2004-02-23 20:48:38 +00:00
2d1a537d87
* Patch by Thomas Elste, 10 Feb 2004: Add support for NET+50 CPU and ModNET50 board
wdenk
2004-02-23 19:30:57 +00:00
3c74e32a98
* Patch by Travis Sawyer, 09 Feb 2004: o 440GX: - Fix PCI Indirect access for type 1 config cycles with ppc440. - Add phymode for 440 enet - fix pci pre init o XPedite1K: - Change board_pre_init to board_early_init_f - Add user flash to bus controller setup - Fix pci pre init - Fix is_pci_host to check GPIO for monarch bit - Force xpedite1k to pci conventional mode (via #define option)
wdenk
2004-02-22 23:46:08 +00:00
bf9e3b38f7
* Some code cleanup
wdenk
2004-02-12 00:47:09 +00:00
a2d18bb7d3
* Make sure to use a bus clock divider of 2 only when running TQM8xxM modules at CPU clock frequencies above 66 MHz.
LABEL_2004_02_11_2240
wdenk
2004-02-11 21:35:18 +00:00
cd37d9e6e5
* Patch by Jian Zhang, 3 Feb 2004: - Changed the incorrect FAT12BUFSIZE - data_begin in fsdata can be negative. Changed it to be short. * Code cleanup
wdenk
2004-02-10 00:03:41 +00:00
ec4c544bed
Patches by Stephan Linz, 30 Jan 2004: 1: - board/altera/common/flash.c:flash_erase(): o allow interrupts befor get_timer() call o check-up each erased sector and avoid unexpected timeouts - board/altera/dk1c20/dk1s10.c:board_early_init_f(): o enclose sevenseg_set() in cpp condition - remove the ASMI configuration for DK1S10_standard_32 (never present) - fix some typed in mistakes in the NIOS documentation 2: - split DK1C20 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1C20.h 3: - split DK1S10 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1S10.h 4: - Add support for the Microtronix Linux Development Kit NIOS CPU configuration at the Altera Nios Development Kit, Stratix Edition (DK-1S10) 5: - Add documentation for the Altera Nios Development Kit, Stratix Edition (DK-1S10) 6: - Add support for the Nios Serial Peripharel Interface (SPI) (master only) 7: - Add support for the common U-Boot SPI framework at RTC driver DS1306
wdenk
2004-02-09 23:12:24 +00:00
b98fff1d6a
* Patch by Rahul Shanbhag, 28 Jan 2004: Fix flash protection/locking handling for OMAP1610 innovator board.
wdenk
2004-02-09 20:51:26 +00:00
5653fc335a
* Patch by Yuli Barcohen, 26 Jan 2004: Allow bzip2 compression for small memory footprint boards
wdenk
2004-02-08 22:55:38 +00:00
f6e20fc6ca
Patch by Anders Larsen, 09 Jan 2004:
wdenk
2004-02-08 19:38:38 +00:00
f4863a7aec
* Patch by liang a lei, 9 Jan 2004: Fix Intel 28F128J3 ID in include/flash.h
wdenk
2004-02-07 01:27:10 +00:00
ba56f62576
Patch by Travis Sawyer, 30 Dec 2003: Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX base PrPMC board.
wdenk
2004-02-06 23:19:44 +00:00
a6cccaea5a
* Patch by Wolter Kamphuis, 15 Dec 2003: made CONFIG_SILENT_CONSOLE usable on all architectures
wdenk
2004-02-06 21:48:22 +00:00
75d1ea7f6a
Fix variable CPU clock for MPC859/866 systems for low CPU clocks
wdenk
2004-01-31 20:06:54 +00:00
6876609446
* Implement adaptive SDRAM timing configuration based on actual CPU clock frequency for INCA-IP; fix problem with board hanging when switching from 150MHz to 100MHz
LABEL_2004_01_29_1030
wdenk
2004-01-29 09:22:58 +00:00
c178d3da6f
* Add variable CPU clock for MPC859/866 systems (so far only TQM866M): see doc/README.MPC866 for details; implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866; calculate CPU clock frequency from PLL register values.
wdenk
2004-01-24 20:25:54 +00:00
ef978730dc
* Fix PS/2 keyboard problem caused by statically initialized variable pointing to a location in flash
wdenk
2004-01-21 20:46:28 +00:00
c837dcb1a3
* The PS/2 mux on the BMS2003 board needs 450 ms after power on before we can access it; add delay in case we are faster (with no CF card inserted)
wdenk
2004-01-20 23:12:12 +00:00
b0aef11c9f
Fix typo in Makefile; fix problem with PARTNUM detection
wdenk
2004-01-18 18:21:54 +00:00
1c43771ba8
[Strange. I _did_ check these in before. Seems SF restored an old version of the repository???]
wdenk
2004-01-16 00:30:56 +00:00
c83bf6a2d0
Add a common get_ram_size() function and modify the the board-specific files to invoke that common implementation.
wdenk
2004-01-06 22:38:14 +00:00
b34ff81d9b
Set default clock for INCA-IP to 150 MHz
wdenk
2004-01-06 11:13:56 +00:00
a522fa0e7c
* Make BMS2003 use a separate config file to avoid #ifdef mess; add I2C support; add support for DS1337 RTC
wdenk
2004-01-04 22:51:12 +00:00
180d3f74e4
* Fix problems caused by Robert Schwebel's cramfs patch
wdenk
2004-01-04 16:28:35 +00:00
dd875c767e
* Patch by Robert Schwebel, 15 Dec 2003: add support for cramfs (uses JFFS2 command interface)
wdenk
2004-01-03 21:24:46 +00:00
c935d3bd8b
Patches by Stephan Linz, 11 Dec 2003: - more documentation for NIOS port - new struct nios_pio_t, struct nios_spi_t - Reconfiguration for NIOS Development Kit DK1C20: o move board related code from board/dk1c20 to board/altera/dk1c20 o create a new common source path board/altera/common and move generic flash access stuff into it o change/expand configuration file DK1C20.h - Add support for NIOS Development Kit DK1S10 - Add status LED support for NIOS systems - Add dual 7-segment LED support for Altera NIOS DevKits
wdenk
2004-01-03 19:43:48 +00:00
3a473b2a65
* Patch by Ronen Shitrit, 10 Dec 2003: Add support for the Marvell DB64360 / DB64460 development boards
wdenk
2004-01-03 00:43:19 +00:00
b6e4c4033c
* Patch by Denis Peter, 8 Dec 2003 - add support for the PATI board (MPC555) - add SPI support for the MPC5xx
wdenk
2004-01-02 16:05:07 +00:00
63f3491242
* Patch by André Schwarz, 8 Dec 2003: fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): - TX and RX deskriptors must be quad-word aligned - does not work with only one TX deskriptor - standard reset method does not work
wdenk
2004-01-02 15:01:32 +00:00
7cb22f97ee
* Make CPU clock on ICA-IP board controllable by a "cpuclk" environment variable which can set to "100", "133", or "150". The CPU clock will be configured accordingly upon next reboot. Other values are ignored. In case of an invalid or undefined "cpuclk" value, the compile-time default CPU clock speed will be used.
wdenk
2003-12-27 19:24:54 +00:00
b828dda657
BUBINGA405EP port fixed.
stroese
2003-12-09 14:54:43 +00:00
4e5ca3eb67
* Patch by Bernhard Kuhn, 28 Nov 2003: add support for Coldfire CPU add support for Motorola M5272C3 and M5282EVB boards
wdenk
2003-12-08 01:34:36 +00:00
9fd5e31fe0
* Patch by Pierre Aubert, 24 Nov 2003: - add a return value for the fpga command - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT is defined. If ide_preinit fails, ide_init is aborted. - fix an endianess problem in fat.h
wdenk
2003-12-07 23:55:12 +00:00
3bbc899fc0
Patch by Wolter Kamphuis, 05 Dec 2003: Add support for SNMC's QS850/QS823/QS860T boards
wdenk
2003-12-07 22:27:15 +00:00
b028f71513
* Patch by Yuli Barcohen, 3 Dec 2003: "revive" U-Boot support for old Motorola MPC860ADS board
wdenk
2003-12-07 21:39:28 +00:00
b4676a25e2
* Patch by Andre Schwarz, 24 Nov 2003: add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
wdenk
2003-12-07 19:24:00 +00:00
a2663ea4fc
* Patches by David Müller, 14 Nov 2003: - board/mpl/common/common_util.c * implement support for BZIP2 compressed images * various cleanups (printf -> puts, ...) - board/mpl/common/flash.c * report correct errors to upper layers * check the erase fail and VPP low bits in status reg - board/mpl/vcma9/cmd_vcma9.c - board/mpl/vcma9/flash.c * various cleanups (printf -> puts, ...) - common/cmd_usb.c * fix typo in comment - cpu/arm920t/usb_ohci.c * support for S3C2410 is missing in #if line - drivers/cs8900.c * reinit some registers in case of error (cable missing, ...) - fs/fat/fat.c * support for USB/MMC devices is missing in #if line - include/configs/MIP405.h - include/configs/PIP405.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support - include/configs/VCMA9.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support * enable USB support - lib_arm/armlinux.c * change calling convention of ARM Linux kernel as described on http://www.arm.linux.org.uk/developer/booting.php
wdenk
2003-12-07 18:32:37 +00:00
ef5a9672c7
* Patch by Xue Ligong (Joe), 13 Nov 2003: add Realtek 8019 ethernet driver
wdenk
2003-12-07 00:46:27 +00:00
5779d8d985
* Patch by Nicolas Lacressonnière, 12 Nov 2003: update for for Atmel AT91RM9200DK development kit: - support for environment variables in DataFlash - Atmel DataFlash AT45DB1282 support
wdenk
2003-12-06 23:55:10 +00:00
8bf3b005dd
* Patches by Stephan Linz, 3 Nov 2003: - more endianess fixes for LAN91C111 driver - CFG_HZ configuration patch for NIOS Cyclone board
wdenk
2003-12-06 23:20:41 +00:00
a8c7c708a9
* Patch by Gleb Natapov, 19 Sep 2003: Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
wdenk
2003-12-06 19:49:23 +00:00
fa1399ed12
Accelerate booting on TRAB board: read and check autoupdate image headers first instead of always reading the whole images.
LABEL_2003_12_06_1550
wdenk
2003-12-06 11:20:01 +00:00
b96619a117
Fix typo in MPC5XXX code (pointed out by Victor Wren)
wdenk
2003-12-05 21:08:38 +00:00
fd3103bb8e
Add support for BMS2003 board (featuring a NEC NL6448BC33-54. 10.4", 640x480 TFT display). Fix NEC display names (it's 6440 [for 640x480], not 6640).
wdenk
2003-11-25 16:55:19 +00:00
b4757cee52
Fix flash driver for TRAB board (must use Unlock Bypass Reset command to exit Unlock Bypass Mode); adjust timings for flash, SRAM and CPLD
LABEL_2003_11_26_MKR
wdenk
2003-11-17 21:45:27 +00:00
5bb226e821
* Use "-fPIC" instead of "-mrelocatable" to prevent problems with recent tools
wdenk
2003-11-17 21:14:37 +00:00
5cf9da4821
* Patch by Bernhard Kuhn, 28 Oct 2003: Add low boot support for MPC5200
wdenk
2003-11-07 13:42:26 +00:00
b13fb01a62
* Fix parameter passing to standalone images with bootm command
U-Boot-1_0_0
wdenk
2003-10-30 21:49:38 +00:00
5fa66df63a
* Prepare for release
wdenk
2003-10-29 23:18:55 +00:00
a0f2fe524c
* Patch by Stephan Linz, 28 Oct 2003: fix init sequence error for NIOS port
wdenk
2003-10-28 09:14:21 +00:00
a57a496f4d
* Patch by Xiao Xianghua, 23 Oct 2003: small patch for mpc85xx
wdenk
2003-10-26 22:52:58 +00:00
wdenk
stroese