arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet

The Globalscale Technologies Dreamplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up both network
port 0 and 1. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add myself as maintainer (this board seems to be orphaned,
could not contact Jason Cooper using current email).
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/dreamplug/dreamplug.h, cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>

include/configs/dreamplug.h

@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * (C) Copyright 2011
- * Jason Cooper <u-boot@lakedaemon.net>
+ * (C) Copyright 2022 Tony Dinh <mibodhi@gmail.com>
+ * (C) Copyright 2011 Jason Cooper <u-boot@lakedaemon.net>
  *
  * Based on work by:
  * Marvell Semiconductor <www.marvell.com>
@@ -13,15 +13,6 @@
 
 #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
 /*
  * Default environment variables
  */
@@ -36,16 +27,15 @@
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
+#endif
 
 /*
  * SATA Driver configuration
  */
-#ifdef CONFIG_SATA
 #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_DREAMPLUG_H */