Merge https://source.denx.de/u-boot/custodians/u-boot-marvell

- mrvl_uart.sh: Remove script (Pali)
- Fix Espressobin build for configs where ENV is not in SPI (Rogier)
- mvebu: a37xx: Add support for reading OTP (Pali)
- mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert)
- mvebu: Add support for reading LD0 and LD1 eFuse (Pali)
- kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali)
- mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali)
- arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali)
- mvebu: a37xx: Add support for writing Security OTP values (Pali)
- mvebu: turris: Misc enhancements and cleanups / fixes (Pali)
- Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)

include/configs/sheevaplug.h

@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * (C) Copyright 2022 Tony Dinh <mibodhi@gmail.com>
  * (C) Copyright 2009-2014
  * Gerald Kerma <dreagle@doukki.net>
  * Marvell Semiconductor <www.marvell.com>
@@ -14,17 +15,8 @@
 /*
  *  Environment variables configurations
  */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
-/*
- * Default environment variables
- */
-
 #define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"	\
-	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT	\
+	"=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT	\
 	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
 	"x_bootcmd_usb=usb start\0" \
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
@@ -32,16 +24,13 @@
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
 
 /*
- * SATA driver configuration
+ * Support large disk for SATA and USB
  */
-#ifdef CONFIG_SATA
+#define CONFIG_SYS_64BIT_LBA
 #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_SHEEVAPLUG_H */