arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Akshay Bhat <akshaybhat@timesys.com> Cc: Ken Lin <Ken.Lin@advantech.com.tw> Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
@@ -1,222 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright (C) 2016 Timesys Corporation
|
||||
* Copyright (C) 2016 Advantech Corporation
|
||||
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
||||
*/
|
||||
|
||||
#ifndef __ADVANTECH_DMSBA16_CONFIG_H
|
||||
#define __ADVANTECH_DMSBA16_CONFIG_H
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/mach-imx/gpio.h>
|
||||
|
||||
#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
|
||||
|
||||
#define CONFIG_MXC_UART_BASE UART4_BASE
|
||||
#define CONSOLE_DEV "ttymxc3"
|
||||
#define CONFIG_EXTRA_BOOTARGS "panic=10"
|
||||
|
||||
#define CONFIG_BOOT_DIR ""
|
||||
#define CONFIG_LOADCMD "fatload"
|
||||
#define CONFIG_RFSPART "2"
|
||||
|
||||
#include "mx6_common.h"
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
||||
|
||||
/* SATA Configs */
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
||||
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
||||
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
||||
#define CONFIG_LBA48
|
||||
|
||||
/* MMC Configs */
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
|
||||
#define CONFIG_USBD_HS
|
||||
|
||||
/* Networking Configs */
|
||||
#define CONFIG_FEC_MXC
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_XCV_TYPE RGMII
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
#define CONFIG_FEC_MXC_PHYADDR 4
|
||||
|
||||
/* Serial Flash */
|
||||
|
||||
#define CONFIG_LOADADDR 0x12000000
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"image=" CONFIG_BOOT_DIR "/uImage\0" \
|
||||
"uboot=u-boot.imx\0" \
|
||||
"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
|
||||
"fdt_addr=0x18000000\0" \
|
||||
"boot_fdt=yes\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"console=" CONSOLE_DEV "\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"sddev=0\0" \
|
||||
"emmcdev=1\0" \
|
||||
"partnum=1\0" \
|
||||
"loadcmd=" CONFIG_LOADCMD "\0" \
|
||||
"rfspart=" CONFIG_RFSPART "\0" \
|
||||
"update_sd_firmware=" \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"if mmc dev ${mmcdev}; then " \
|
||||
"if ${get_cmd} ${update_sd_firmware_filename}; then " \
|
||||
"setexpr fw_sz ${filesize} / 0x200; " \
|
||||
"setexpr fw_sz ${fw_sz} + 1; " \
|
||||
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
|
||||
"fi; " \
|
||||
"fi\0" \
|
||||
"update_sf_uboot=" \
|
||||
"if tftp $loadaddr $uboot; then " \
|
||||
"sf probe; " \
|
||||
"sf erase 0 0xC0000; " \
|
||||
"sf write $loadaddr 0x400 $filesize; " \
|
||||
"echo 'U-Boot upgraded. Please reset'; " \
|
||||
"fi\0" \
|
||||
"setargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
|
||||
"loadbootscript=" \
|
||||
"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
|
||||
" source\0" \
|
||||
"loadimage=" \
|
||||
"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
|
||||
"tryboot=" \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run doboot; " \
|
||||
"fi; " \
|
||||
"fi;\0" \
|
||||
"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
|
||||
"run setargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${image}; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"usb start; " \
|
||||
"setenv dev usb; " \
|
||||
"setenv devnum 0; " \
|
||||
"setenv rootdev sda${rfspart}; " \
|
||||
"run tryboot; " \
|
||||
\
|
||||
"setenv dev mmc; " \
|
||||
"setenv rootdev mmcblk0p${rfspart}; " \
|
||||
\
|
||||
"setenv devnum ${sddev}; " \
|
||||
"if mmc dev ${devnum}; then " \
|
||||
"run tryboot; " \
|
||||
"fi; " \
|
||||
\
|
||||
"setenv devnum ${emmcdev}; " \
|
||||
"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
|
||||
"if mmc dev ${devnum}; then " \
|
||||
"run tryboot; " \
|
||||
"fi; " \
|
||||
\
|
||||
"bmode usb; " \
|
||||
|
||||
#define CONFIG_ARP_TIMEOUT 200UL
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
||||
|
||||
/* Framebuffer */
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_VIDEO_BMP_LOGO
|
||||
#define CONFIG_IMX_HDMI
|
||||
#define CONFIG_IMX_VIDEO_SKIP
|
||||
|
||||
#define CONFIG_IMX6_PWM_PER_CLK 66000000
|
||||
|
||||
#ifdef CONFIG_CMD_PCI
|
||||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#define CONFIG_PCIE_IMX
|
||||
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
|
||||
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
|
||||
#endif
|
||||
|
||||
/* I2C Configs */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2
|
||||
#define CONFIG_SYS_I2C_MXC_I2C3
|
||||
|
||||
#endif /* __ADVANTECH_DMSBA16_CONFIG_H */
|
||||
Reference in New Issue
Block a user