eaw/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge with http://www.jdl.com/software/u-boot-86xx.git

Browse Source
This commit is contained in:
Wolfgang Denk
2006-10-20 23:52:58 +02:00
parent ba999c531e 3acb7727ce
commit d67c14c0f4
97 changed files with 11046 additions and 1279 deletions
Download Patch File Download Diff File Expand all files Collapse all files

190
include/ahci.h Normal file
View File

@@ -0,0 +1,190 @@
/*
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
* Author: Jason Jin<Jason.jin@freescale.com>
* Zhang Wei<wei.zhang@freescale.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef _AHCI_H_
#define _AHCI_H_
#define AHCI_PCI_BAR 0x24
#define AHCI_MAX_SG 56 /* hardware max is 64K */
#define AHCI_CMD_SLOT_SZ 32
#define AHCI_RX_FIS_SZ 256
#define AHCI_CMD_TBL_HDR 0x80
#define AHCI_CMD_TBL_CDB 0x40
#define AHCI_CMD_TBL_SZ AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16)
#define AHCI_PORT_PRIV_DMA_SZ AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ \
+ AHCI_RX_FIS_SZ
#define AHCI_CMD_ATAPI (1 << 5)
#define AHCI_CMD_WRITE (1 << 6)
#define AHCI_CMD_PREFETCH (1 << 7)
#define AHCI_CMD_RESET (1 << 8)
#define AHCI_CMD_CLR_BUSY (1 << 10)
#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
/* Global controller registers */
#define HOST_CAP 0x00 /* host capabilities */
#define HOST_CTL 0x04 /* global host control */
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
/* HOST_CTL bits */
#define HOST_RESET (1 << 0) /* reset controller; self-clear */
#define HOST_IRQ_EN (1 << 1) /* global IRQ enable */
#define HOST_AHCI_EN (1 << 31) /* AHCI enabled */
/* Registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
#define PORT_IRQ_STAT 0x10 /* interrupt status */
#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
#define PORT_CMD 0x18 /* port command */
#define PORT_TFDATA 0x20 /* taskfile data */
#define PORT_SIG 0x24 /* device TF signature */
#define PORT_CMD_ISSUE 0x38 /* command issue */
#define PORT_SCR 0x28 /* SATA phy register block */
#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
/* PORT_IRQ_{STAT,MASK} bits */
#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \
| PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR
#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \
| PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \
| PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \
| PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \
| PORT_IRQ_D2H_REG_FIS
/* PORT_CMD bits */
#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
#define PORT_CMD_CLO (1 << 3) /* Command list override */
#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
#define AHCI_MAX_PORTS 32
/* SETFEATURES stuff */
#define SETFEATURES_XFER 0x03
#define XFER_UDMA_7 0x47
#define XFER_UDMA_6 0x46
#define XFER_UDMA_5 0x45
#define XFER_UDMA_4 0x44
#define XFER_UDMA_3 0x43
#define XFER_UDMA_2 0x42
#define XFER_UDMA_1 0x41
#define XFER_UDMA_0 0x40
#define XFER_MW_DMA_2 0x22
#define XFER_MW_DMA_1 0x21
#define XFER_MW_DMA_0 0x20
#define XFER_SW_DMA_2 0x12
#define XFER_SW_DMA_1 0x11
#define XFER_SW_DMA_0 0x10
#define XFER_PIO_4 0x0C
#define XFER_PIO_3 0x0B
#define XFER_PIO_2 0x0A
#define XFER_PIO_1 0x09
#define XFER_PIO_0 0x08
#define XFER_PIO_SLOW 0x00
#define ATA_FLAG_SATA (1 << 3)
#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */
#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */
#define ATA_FLAG_SATA_RESET (1 << 7) /* (obsolete) use COMRESET */
#define ATA_FLAG_PIO_DMA (1 << 8) /* PIO cmds via DMA */
#define ATA_FLAG_NO_ATAPI (1 << 11) /* No ATAPI support */
struct ahci_cmd_hdr {
u32 opts;
u32 status;
u32 tbl_addr;
u32 tbl_addr_hi;
u32 reserved[4];
};
struct ahci_sg {
u32 addr;
u32 addr_hi;
u32 reserved;
u32 flags_size;
};
struct ahci_ioports {
u32 cmd_addr;
u32 scr_addr;
u32 port_mmio;
struct ahci_cmd_hdr *cmd_slot;
struct ahci_sg *cmd_tbl_sg;
u32 cmd_tbl;
u32 rx_fis;
};
struct ahci_probe_ent {
pci_dev_t dev;
struct ahci_ioports port[AHCI_MAX_PORTS];
u32 n_ports;
u32 hard_port_no;
u32 host_flags;
u32 host_set_flags;
u32 mmio_base;
u32 pio_mask;
u32 udma_mask;
u32 flags;
u32 cap; /* cache of HOST_CAP register */
u32 port_map; /* cache of HOST_PORTS_IMPL reg */
u32 link_port_map; /*linkup port map*/
};
#endif

90
include/asm-ppc/fsl_i2c.h Normal file
View File

@@ -0,0 +1,90 @@
/*
* Freescale I2C Controller
*
* Copyright 2006 Freescale Semiconductor, Inc.
*
* Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
* Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
* and Jeff Brown.
* Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ASM_FSL_I2C_H_
#define _ASM_FSL_I2C_H_
#include <asm/types.h>
typedef struct fsl_i2c {
u8 adr; /* I2C slave address */
u8 res0[3];
#define I2C_ADR 0xFE
#define I2C_ADR_SHIFT 1
#define I2C_ADR_RES ~(I2C_ADR)
u8 fdr; /* I2C frequency divider register */
u8 res1[3];
#define IC2_FDR 0x3F
#define IC2_FDR_SHIFT 0
#define IC2_FDR_RES ~(IC2_FDR)
u8 cr; /* I2C control redister */
u8 res2[3];
#define I2C_CR_MEN 0x80
#define I2C_CR_MIEN 0x40
#define I2C_CR_MSTA 0x20
#define I2C_CR_MTX 0x10
#define I2C_CR_TXAK 0x08
#define I2C_CR_RSTA 0x04
#define I2C_CR_BCST 0x01
u8 sr; /* I2C status register */
u8 res3[3];
#define I2C_SR_MCF 0x80
#define I2C_SR_MAAS 0x40
#define I2C_SR_MBB 0x20
#define I2C_SR_MAL 0x10
#define I2C_SR_BCSTM 0x08
#define I2C_SR_SRW 0x04
#define I2C_SR_MIF 0x02
#define I2C_SR_RXAK 0x01
u8 dr; /* I2C data register */
u8 res4[3];
#define I2C_DR 0xFF
#define I2C_DR_SHIFT 0
#define I2C_DR_RES ~(I2C_DR)
u8 dfsrr; /* I2C digital filter sampling rate register */
u8 res5[3];
#define I2C_DFSRR 0x3F
#define I2C_DFSRR_SHIFT 0
#define I2C_DFSRR_RES ~(I2C_DR)
/* Fill out the reserved block */
u8 res6[0xE8];
} fsl_i2c_t;
#define I2C_READ 1
#define I2C_WRITE 0
#endif /* _ASM_I2C_H_ */

25
include/asm-ppc/immap_85xx.h
View File

@@ -246,7 +246,6 @@ typedef struct ccsr_lbc {
/*
* PCI Registers(0x8000-0x9000)
* Omitting Reserved(0x9000-0x2_0000)
*/
typedef struct ccsr_pcix {
uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */
@@ -309,9 +308,27 @@ typedef struct ccsr_pcix {
uint peextaddrcr; /* 0x8e14 - PCIX Error Extended Address Capture Register */
uint pedlcr; /* 0x8e18 - PCIX Error Data Low Capture Register */
uint pedhcr; /* 0x8e1c - PCIX Error Error Data High Capture Register */
char res11[94688];
uint gas_timr; /* 0x8e20 - PCIX Gasket Timer Register */
char res11[476];
} ccsr_pcix_t;
#define PCIX_COMMAND 0x62
#define POWAR_EN 0x80000000
#define POWAR_IO_READ 0x00080000
#define POWAR_MEM_READ 0x00040000
#define POWAR_IO_WRITE 0x00008000
#define POWAR_MEM_WRITE 0x00004000
#define POWAR_MEM_512M 0x0000001c
#define POWAR_IO_1M 0x00000013
#define PIWAR_EN 0x80000000
#define PIWAR_PF 0x20000000
#define PIWAR_LOCAL 0x00f00000
#define PIWAR_READ_SNOOP 0x00050000
#define PIWAR_WRITE_SNOOP 0x00005000
#define PIWAR_MEM_2G 0x0000001e
/*
* L2 Cache Registers(0x2_0000-0x2_1000)
*/
@@ -1572,6 +1589,8 @@ typedef struct ccsr_gur {
char res15[61651];
} ccsr_gur_t;
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
typedef struct immap {
ccsr_local_ecm_t im_local_ecm;
ccsr_ddr_t im_ddr;
@@ -1579,6 +1598,8 @@ typedef struct immap {
ccsr_duart_t im_duart;
ccsr_lbc_t im_lbc;
ccsr_pcix_t im_pcix;
ccsr_pcix_t im_pcix2;
char reserved[90112];
ccsr_l2cache_t im_l2cache;
ccsr_dma_t im_dma;
ccsr_tsec_t im_tsec1;

1364
include/asm-ppc/immap_86xx.h Normal file
View File

File diff suppressed because it is too large Load Diff

18
include/asm-ppc/mmu.h
View File

@@ -117,8 +117,8 @@ typedef struct _P601_BAT {
*/
typedef struct _pte {
unsigned long page_num:20;
unsigned long flags:12; /* Page flags (some unused bits) */
unsigned long page_num:20;
unsigned long flags:12; /* Page flags (some unused bits) */
} pte;
#define PD_SHIFT (10+12) /* Page directory */
@@ -434,9 +434,14 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define BOOKE_PAGESZ_1GB 10
#define BOOKE_PAGESZ_4GB 11
#if defined(CONFIG_MPC86xx)
#define LAWBAR_BASE_ADDR 0x00FFFFFF
#define LAWAR_TRGT_IF 0x01F00000
#else
#define LAWBAR_BASE_ADDR 0x000FFFFF
#define LAWAR_EN 0x80000000
#define LAWAR_TRGT_IF 0x00F00000
#endif
#define LAWAR_EN 0x80000000
#define LAWAR_SIZE 0x0000003F
#define LAWAR_TRGT_IF_PCI 0x00000000
@@ -445,8 +450,11 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define LAWAR_TRGT_IF_PCI2 0x00100000
#define LAWAR_TRGT_IF_LBC 0x00400000
#define LAWAR_TRGT_IF_CCSR 0x00800000
#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
#define LAWAR_TRGT_IF_RIO 0x00c00000
#define LAWAR_TRGT_IF_DDR 0x00f00000
#define LAWAR_TRGT_IF_DDR1 0x00f00000
#define LAWAR_TRGT_IF_DDR2 0x01600000
#define LAWAR_SIZE_BASE 0xa
#define LAWAR_SIZE_4K (LAWAR_SIZE_BASE+1)
@@ -469,6 +477,10 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define LAWAR_SIZE_512M (LAWAR_SIZE_BASE+18)
#define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19)
#define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20)
#define LAWAR_SIZE_4G (LAWAR_SIZE_BASE+21)
#define LAWAR_SIZE_8G (LAWAR_SIZE_BASE+22)
#define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23)
#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24)
#ifdef CONFIG_440SPE
/*----------------------------------------------------------------------------+

19
include/asm-ppc/processor.h
View File

@@ -264,6 +264,7 @@
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
#define SPRN_MBAR 0x137 /* System memory base address */
@@ -443,6 +444,11 @@
#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
#define ESR_ST 0x00800000 /* Store Operation */
#if defined(CONFIG_MPC86xx)
#define SPRN_MSSCRO 0x3f6
#endif
/* Short-hand versions for a number of the above SPRNs */
#define CTR SPRN_CTR /* Counter Register */
@@ -501,10 +507,14 @@
#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define LR SPRN_LR
#define MBAR SPRN_MBAR /* System memory base address */
#if defined(CONFIG_E500)
#if defined(CONFIG_MPC86xx)
#define MSSCR0 SPRN_MSSCRO
#endif
#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define PIR SPRN_PIR
#endif
#define SVR SPRN_SVR /* System-On-Chip Version Register */
@@ -538,7 +548,7 @@
#define CSRR0 SPRN_CSRR0
#define CSRR1 SPRN_CSRR1
#define IVPR SPRN_IVPR
#define USPRG0 SPRN_USPRG0
#define USPRG0 SPRN_USPRG
#define SPRG4R SPRN_SPRG4R
#define SPRG5R SPRN_SPRG5R
#define SPRG6R SPRN_SPRG6R
@@ -763,6 +773,8 @@
#define PVR_85xx_REV1 (PVR_85xx | 0x0010)
#define PVR_85xx_REV2 (PVR_85xx | 0x0020)
#define PVR_86xx 0x80040000
#define PVR_86xx_REV1 (PVR_86xx | 0x0010)
/*
* For the 8xx processors, all of them report the same PVR family for
@@ -798,6 +810,8 @@
#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */
#define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */
#define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */
#define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */
@@ -815,6 +829,7 @@
#define SVR_8541 0x807A
#define SVR_8548 0x8031
#define SVR_8548_E 0x8039
#define SVR_8641 0x8090
/* I am just adding a single entry for 8260 boards. I think we may be

2
include/asm-ppc/u-boot.h
View File

@@ -45,7 +45,7 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
|| defined(CONFIG_E500)
|| defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
#if defined(CONFIG_MPC5xxx)

14
include/common.h
View File

@@ -79,6 +79,10 @@ typedef volatile unsigned char vu_char;
#endif
#include <asm/immap_8260.h>
#endif
#ifdef CONFIG_MPC86xx
#include <mpc86xx.h>
#include <asm/immap_86xx.h>
#endif
#ifdef CONFIG_MPC85xx
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
@@ -200,6 +204,9 @@ int checkdram (void);
char * strmhz(char *buf, long hz);
int last_stage_init(void);
extern ulong monitor_flash_len;
#ifdef CFG_ID_EEPROM
int mac_read_from_eeprom(void);
#endif
/* common/flash.c */
void flash_perror (int);
@@ -377,6 +384,7 @@ void trap_init (ulong);
defined (CONFIG_74xx) || \
defined (CONFIG_MPC8220) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83XX)
unsigned char in8(unsigned int);
void out8(unsigned int, unsigned char);
@@ -465,6 +473,10 @@ ulong get_bus_freq (ulong);
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
# if defined(CONFIG_440)
@@ -484,7 +496,7 @@ void get_sys_info ( sys_info_t * );
#if defined(CONFIG_8xx) || defined(CONFIG_8260)
void cpu_init_f (volatile immap_t *immr);
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
void cpu_init_f (void);
#endif

44
include/configs/MPC8540ADS.h
View File

@@ -68,6 +68,10 @@
* The board, however, can run at 66MHz. In any event, this value
* must match the settings of some switches. Details can be found
* in the README.mpc85xxads.
*
* XXX -- Can't we run at 66 MHz, anyway? PCI should drop to
* 33MHz to accommodate, based on a PCI pin.
* Note that PCI-X won't work at 33MHz.
*/
#ifndef CONFIG_SYS_CLK_FREQ
@@ -293,12 +297,31 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8540@0"
#define OF_SOC "soc8540@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500"
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/* RapidIO MMU */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
@@ -312,9 +335,10 @@
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI1_IO_BASE 0x0
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
@@ -497,8 +521,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=your.ramdisk.u-boot\0"
"ramdiskaddr=600000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"fdtaddr=400000\0" \
"fdtfile=your.fdt.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -506,13 +532,15 @@
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
"bootm $loadaddr"
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr $ramdiskaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND

8
include/configs/MPC8540EVAL.h
View File

@@ -179,12 +179,16 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/* General PCI */
#define CFG_PCI_MEM_BASE 0x80000000

48
include/configs/MPC8541CDS.h
View File

@@ -308,13 +308,29 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8541@0"
#define OF_SOC "soc8541@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600"
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* General PCI
@@ -323,32 +339,27 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI2_IO_BASE 0xe3000000
#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI2_IO_BASE 0x00000000
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
#define CONFIG_MPC85XX_PCI2
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
@@ -482,8 +493,10 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=your.ramdisk.u-boot\0"
"ramdiskaddr=600000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"fdtaddr=400000\0" \
"fdtfile=your.fdt.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -491,7 +504,8 @@ extern unsigned long get_clock_freq(void);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
"bootm $loadaddr"
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \

54
include/configs/MPC8548CDS.h
View File

@@ -314,13 +314,29 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8548@0"
#define OF_SOC "soc8548@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600"
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* General PCI
@@ -329,32 +345,27 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI2_IO_BASE 0xe3000000
#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI2_IO_BASE 0x00000000
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_85XX_PCI2
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
@@ -382,13 +393,11 @@ extern unsigned long get_clock_freq(void);
#define TSEC2_PHY_ADDR 1
#define TSEC3_PHY_ADDR 2
#define TSEC4_PHY_ADDR 3
#define FEC_PHY_ADDR 3
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define TSEC3_PHYIDX 0
#define TSEC4_PHYIDX 0
#define FEC_PHYIDX 0
/* Options are: eTSEC[0-3] */
#define CONFIG_ETHPRIME "eTSEC0"
@@ -476,6 +485,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#define CONFIG_HAS_ETH3
#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.253
@@ -498,8 +509,11 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=your.ramdisk.u-boot\0"
"ramdiskaddr=600000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"fdtaddr=400000\0" \
"fdtfile=your.fdt.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -507,7 +521,9 @@ extern unsigned long get_clock_freq(void);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
"bootm $loadaddr"
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \

50
include/configs/MPC8555CDS.h
View File

@@ -308,13 +308,29 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8555@0"
#define OF_SOC "soc8555@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600"
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* General PCI
@@ -323,33 +339,28 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI2_IO_BASE 0xe3000000
#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
#define CFG_PCI2_IO_BASE 0x00000000
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_MPC85XX_PCI2
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#endif /* CONFIG_PCI */
@@ -482,8 +493,10 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=your.ramdisk.u-boot\0"
"ramdiskaddr=600000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"fdtaddr=400000\0" \
"fdtfile=your.fdt.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -491,7 +504,8 @@ extern unsigned long get_clock_freq(void);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
"bootm $loadaddr"
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \

20
include/configs/MPC8560ADS.h
View File

@@ -290,12 +290,28 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8560@0"
#define OF_SOC "soc8560@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500"
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/* RapidIO MMU */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */

634
include/configs/MPC8641HPCN.h Normal file
View File

@@ -0,0 +1,634 @@
/*
* Copyright 2006 Freescale Semiconductor.
*
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* MPC8641HPCN board configuration file
*
* Make sure you change the MAC address and other network params first,
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_MPC86xx 1 /* MPC86xx */
#define CONFIG_MPC8641 1 /* MPC8641 specific */
#define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */
#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#undef DEBUG
#ifdef RUN_DIAG
#define CFG_DIAG_ADDR 0xff800000
#endif
#define CFG_RESET_ADDRESS 0xfff00100
/*#undef CONFIG_PCI*/
#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_NUM_DDR_CONTROLLERS 2
/* #define CONFIG_DDR_INTERLEAVE 1 */
#define CACHE_LINE_INTERLEAVING 0x20000000
#define PAGE_INTERLEAVING 0x21000000
#define BANK_INTERLEAVING 0x22000000
#define SUPER_BANK_INTERLEAVING 0x23000000
#define CONFIG_ALTIVEC 1
/*
* L2CR setup -- make sure this is right for your board!
*/
#define CFG_L2
#define L2_INIT 0
#define L2_ENABLE (L2CR_L2E)
#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
/*
* DDR Setup
*/
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM
#define MPC86xx_DDR_SDRAM_CLK_CNTL
#if defined(CONFIG_SPD_EEPROM)
/*
* Determine DDR configuration from I2C interface.
*/
#define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
#define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */
#define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */
#define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */
#else
/*
* Manually set up DDR1 parameters
*/
#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
#define CFG_DDR_CS0_BNDS 0x0000000F
#define CFG_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
#define CFG_DDR_EXT_REFRESH 0x00000000
#define CFG_DDR_TIMING_0 0x00260802
#define CFG_DDR_TIMING_1 0x39357322
#define CFG_DDR_TIMING_2 0x14904cc8
#define CFG_DDR_MODE_1 0x00480432
#define CFG_DDR_MODE_2 0x00000000
#define CFG_DDR_INTERVAL 0x06090100
#define CFG_DDR_DATA_INIT 0xdeadbeef
#define CFG_DDR_CLK_CTRL 0x03800000
#define CFG_DDR_OCD_CTRL 0x00000000
#define CFG_DDR_OCD_STATUS 0x00000000
#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
#define CFG_DDR_CONTROL2 0x04400000
/* Not used in fixed_sdram function */
#define CFG_DDR_MODE 0x00000022
#define CFG_DDR_CS1_BNDS 0x00000000
#define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */
#define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */
#define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */
#define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */
#endif
#define CFG_ID_EEPROM 1
#define ID_EEPROM_ADDR 0x57
/*
* In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
* There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff
* map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
* However, when u-boot comes up, the flash_init needs hard start addresses
* to build its info table. For user convenience, the flash addresses is
* fe800000 and ff800000. That way, u-boot knows where the flash is
* and the user can download u-boot code from promjet to fef00000, a
* more intuitive location than fe700000.
*
* Note that, on switching the boot location, fef00000 becomes fff00000.
*/
#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */
#define CFG_FLASH_BASE2 0xff800000
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/
#define CFG_BR1_PRELIM 0xfe001001 /* port size 16bit */
#define CFG_OR1_PRELIM 0xff006ff7 /* 16MB Alternate Boot Flash area*/
#define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */
#define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/
#define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */
#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/
#define PIXIS_BASE 0xf8100000 /* PIXIS registers */
#define PIXIS_ID 0x0 /* Board ID at offset 0 */
#define PIXIS_VER 0x1 /* Board version at offset 1 */
#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */
#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
#define PIXIS_VCTL 0x10 /* VELA Control Register */
#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
#undef CFG_RAMBOOT
#endif
#if defined(CFG_RAMBOOT)
#undef CFG_FLASH_CFI_DRIVER
#undef CONFIG_SPD_EEPROM
#define CFG_SDRAM_SIZE 256
#endif
#undef CONFIG_CLOCKS_IN_MHZ
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 1
#ifndef CFG_INIT_RAM_LOCK
#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
#else
#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
#endif
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/*
* Pass open firmware flat tree to kernel
*/
#define CONFIG_OF_FLAT_TREE 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,8641@0"
#define OF_SOC "soc8641@f8000000"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500"
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3100
/*
* RapidIO MMU
*/
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
/*
* General PCI
* Addresses are mapped 1-1.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS 0x00000000
#define CFG_PCI_MEMORY_PHYS 0x00000000
#define CFG_PCI_MEMORY_SIZE 0x80000000
/* For RTL8139 */
#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
#define _IO_BASE 0x00000000
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
#define CFG_PCI2_IO_BASE 0xe3000000
#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
#if defined(CONFIG_PCI)
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#undef CFG_SCSI_SCAN_BUS_REVERSE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_RTL8139
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_DOS_PARTITION
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC86XX_TSEC1 1
#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1"
#define CONFIG_MPC86XX_TSEC2 1
#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2"
#define CONFIG_MPC86XX_TSEC3 1
#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3"
#define CONFIG_MPC86XX_TSEC4 1
#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC3_PHY_ADDR 2
#define TSEC4_PHY_ADDR 3
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define TSEC3_PHYIDX 0
#define TSEC4_PHYIDX 0
#define CONFIG_ETHPRIME "eTSEC1"
#endif /* CONFIG_TSEC_ENET */
/*
* BAT0 2G Cacheable, non-guarded
* 0x0000_0000 2G DDR
*/
#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
#define CFG_IBAT0U CFG_DBAT0U
/*
* BAT1 1G Cache-inhibited, guarded
* 0x8000_0000 512M PCI-Express 1 Memory
* 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U CFG_DBAT1U
/*
* BAT2 512M Cache-inhibited, guarded
* 0xc000_0000 512M RapidIO Memory
*/
#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U CFG_DBAT2U
/*
* BAT3 4M Cache-inhibited, guarded
* 0xf800_0000 4M CCSR
*/
#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT3U CFG_DBAT3U
/*
* BAT4 32M Cache-inhibited, guarded
* 0xe200_0000 16M PCI-Express 1 I/O
* 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U CFG_DBAT4U
/*
* BAT5 128K Cacheable, non-guarded
* 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
*/
#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CFG_IBAT5L CFG_DBAT5L
#define CFG_IBAT5U CFG_DBAT5U
/*
* BAT6 32M Cache-inhibited, guarded
* 0xfe00_0000 32M FLASH
*/
#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_IBAT6U CFG_DBAT6U
#define CFG_DBAT7L 0x00000000
#define CFG_DBAT7U 0x00000000
#define CFG_IBAT7L 0x00000000
#define CFG_IBAT7U 0x00000000
/*
* Environment
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
#define CFG_ENV_SIZE 0x2000
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#if defined(CFG_RAMBOOT)
#if defined(CONFIG_PCI)
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_PCI \
| CFG_CMD_I2C \
| CFG_CMD_SCSI \
| CFG_CMD_EXT2) \
& \
~(CFG_CMD_ENV \
| CFG_CMD_IMLS \
| CFG_CMD_FLASH \
| CFG_CMD_LOADS))
#else
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_I2C \
| CFG_CMD_SCSI \
| CGF_CMD_EXT2) \
& \
~(CFG_CMD_ENV \
| CFG_CMD_IMLS \
| CFG_CMD_FLASH \
| CFG_CMD_LOADS))
#endif
#else
#if defined(CONFIG_PCI)
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_PCI \
| CFG_CMD_PING \
| CFG_CMD_I2C \
| CFG_CMD_SCSI \
| CFG_CMD_EXT2)
#else
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_I2C)
#endif
#endif
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Environment Configuration
*/
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:01
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_HAS_ETH1 1
#define CONFIG_HAS_ETH2 1
#define CONFIG_HAS_ETH3 1
#define CONFIG_IPADDR 192.168.1.100
#define CONFIG_HOSTNAME unknown
#define CONFIG_ROOTPATH /opt/nfsroot
#define CONFIG_BOOTFILE uImage
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK 255.255.255.0
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"dtbaddr=400000\0" \
"dtbfile=mpc8641_hpcn.dtb\0" \
"en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
"dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
"maxcpus=2"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
"tftp $dtbaddr $dtbfile;" \
"bootm $loadaddr - $dtbaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
"tftp $dtbaddr $dtbfile;" \
"bootm $loadaddr $ramdiskaddr $dtbaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif /* __CONFIG_H */

8
include/configs/PM854.h
View File

@@ -193,12 +193,16 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* EEPROM configuration

8
include/configs/PM856.h
View File

@@ -190,12 +190,16 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* EEPROM configuration

8
include/configs/SBC8540.h
View File

@@ -214,12 +214,16 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_PCI_MEM_BASE 0xC0000000
#define CFG_PCI_MEM_PHYS 0xC0000000

7
include/configs/TQM85xx.h
View File

@@ -192,12 +192,17 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/* I2C RTC */
#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */

8
include/configs/sbc8560.h
View File

@@ -197,12 +197,16 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_PCI_MEM_BASE 0xC0000000
#define CFG_PCI_MEM_PHYS 0xC0000000

8
include/configs/stxgp3.h
View File

@@ -172,8 +172,11 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
/*
* I2C
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@@ -183,6 +186,7 @@
/* I did the 'if 0' so we could keep the syntax above if ever needed. */
#undef CFG_I2C_NOPROBES
#endif
#define CFG_I2C_OFFSET 0x3000
/* RapdIO Map configuration, mapped 1:1.
*/

21
include/ft_build.h
View File

@@ -36,19 +36,18 @@ struct boot_param_header {
struct ft_cxt {
struct boot_param_header *bph;
int max_size; /* maximum size of tree */
int overflow; /* set when this happens */
u8 *p, *pstr, *pres; /* running pointers */
u8 *p_begin, *pstr_begin, *pres_begin; /* starting pointers */
u8 *p_anchor; /* start of constructed area */
int struct_size, strings_size, res_size;
u8 *p_rsvmap;
u8 *p_start; /* pointer to beginning of dt_struct */
u8 *p_end; /* pointer to end of dt_strings */
u8 *p; /* pointer to end of dt_struct and beginning of dt_strings */
};
void ft_begin_node(struct ft_cxt *cxt, const char *name);
void ft_init_cxt(struct ft_cxt *cxt, void *blob);
void ft_end_node(struct ft_cxt *cxt);
void ft_begin_tree(struct ft_cxt *cxt);
int ft_end_tree(struct ft_cxt *cxt);
void ft_end_tree(struct ft_cxt *cxt);
void ft_finalize_tree(struct ft_cxt *cxt);
void ft_nop(struct ft_cxt *cxt);
void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz);
@@ -57,12 +56,16 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val);
void ft_begin(struct ft_cxt *cxt, void *blob, int max_size);
void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end);
void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end);
void ft_dump_blob(const void *bphp);
void ft_merge_blob(struct ft_cxt *cxt, void *blob);
void *ft_get_prop(void *bphp, const char *propname, int *szp);
#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
#endif
#endif

1
include/image.h
View File

@@ -125,6 +125,7 @@
#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
#define IH_TYPE_SCRIPT 6 /* Script file */
#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
/*
* Compression Types

116
include/mpc86xx.h Normal file
View File

@@ -0,0 +1,116 @@
/*
* Copyright 2006 Freescale Semiconductor.
* Jeffrey Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*/
#ifndef __MPC86xx_H__
#define __MPC86xx_H__
#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */
/*
* l2cr values. Look in config_<BOARD>.h for the actual setup
*/
#define l2cr 1017
#define L2CR_L2E 0x80000000 /* bit 0 - enable */
#define L2CR_L2PE 0x40000000 /* bit 1 - data parity */
#define L2CR_L2I 0x00200000 /* bit 10 - global invalidate bit */
#define L2CR_L2CTL 0x00100000 /* bit 11 - l2 ram control */
#define L2CR_L2DO 0x00010000 /* bit 15 - data-only mode */
#define L2CR_REP 0x00001000 /* bit 19 - l2 replacement alg */
#define L2CR_HWF 0x00000800 /* bit 20 - hardware flush */
#define L2CR_L2IP 0x00000001 /* global invalidate in progress */
/*
* BAT settings. Look in config_<BOARD>.h for the actual setup
*/
#define BATU_BL_128K 0x00000000
#define BATU_BL_256K 0x00000004
#define BATU_BL_512K 0x0000000c
#define BATU_BL_1M 0x0000001c
#define BATU_BL_2M 0x0000003c
#define BATU_BL_4M 0x0000007c
#define BATU_BL_8M 0x000000fc
#define BATU_BL_16M 0x000001fc
#define BATU_BL_32M 0x000003fc
#define BATU_BL_64M 0x000007fc
#define BATU_BL_128M 0x00000ffc
#define BATU_BL_256M 0x00001ffc
#define BATU_BL_512M 0x00003ffc
#define BATU_BL_1G 0x00007ffc
#define BATU_BL_2G 0x0000fffc
#define BATU_BL_4G 0x0001fffc
#define BATU_VS 0x00000002
#define BATU_VP 0x00000001
#define BATU_INVALID 0x00000000
#define BATL_WRITETHROUGH 0x00000040
#define BATL_CACHEINHIBIT 0x00000020
#define BATL_MEMCOHERENCE 0x00000010
#define BATL_GUARDEDSTORAGE 0x00000008
#define BATL_NO_ACCESS 0x00000000
#define BATL_PP_MSK 0x00000003
#define BATL_PP_00 0x00000000 /* No access */
#define BATL_PP_01 0x00000001 /* Read-only */
#define BATL_PP_10 0x00000002 /* Read-write */
#define BATL_PP_11 0x00000003
#define BATL_PP_NO_ACCESS BATL_PP_00
#define BATL_PP_RO BATL_PP_01
#define BATL_PP_RW BATL_PP_10
#define HID0_XBSEN 0x00000100
#define HID0_HIGH_BAT_EN 0x00800000
#define HID0_XAEN 0x00020000
#ifndef __ASSEMBLY__
typedef struct {
unsigned long freqProcessor;
unsigned long freqSystemBus;
} MPC86xx_SYS_INFO;
#define l1icache_enable icache_enable
void l2cache_enable(void);
void l1dcache_enable(void);
static __inline__ unsigned long get_hid0 (void)
{
unsigned long hid0;
asm volatile("mfspr %0, 1008" : "=r" (hid0) :);
return hid0;
}
static __inline__ unsigned long get_hid1 (void)
{
unsigned long hid1;
asm volatile("mfspr %0, 1009" : "=r" (hid1) :);
return hid1;
}
static __inline__ void set_hid0 (unsigned long hid0)
{
asm volatile("mtspr 1008, %0" : : "r" (hid0));
}
static __inline__ void set_hid1 (unsigned long hid1)
{
asm volatile("mtspr 1009, %0" : : "r" (hid1));
}
static __inline__ unsigned long get_l2cr (void)
{
unsigned long l2cr_val;
asm volatile("mfspr %0, 1017" : "=r" (l2cr_val) :);
return l2cr_val;
}
#endif /* _ASMLANGUAGE */
#endif /* __MPC86xx_H__ */

12
include/pci.h
View File

@@ -270,6 +270,15 @@
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */
#define PCI_AGP_SIZEOF 12
/* PCI-X registers */
#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
#define PCI_X_CMD_MAX_READ 0x0000 /* Max Memory Read Byte Count */
#define PCI_X_CMD_MAX_SPLIT 0x0030 /* Max Outstanding Split Transactions */
#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
/* Slot Identification */
#define PCI_SID_ESR 2 /* Expansion Slot Register */
@@ -492,4 +501,7 @@ extern int pci_hose_config_device(struct pci_controller *hose,
extern void pci_mpc824x_init (struct pci_controller *hose);
#endif
#ifdef CONFIG_MPC85xx
extern void pci_mpc85xx_init (struct pci_controller *hose);
#endif
#endif /* _PCI_H */

3
include/pci_ids.h
View File

@@ -1045,6 +1045,9 @@
#define PCI_DEVICE_ID_REALTEK_8139 0x8139
#define PCI_DEVICE_ID_REALTEK_8169 0x8169
#define PCI_VENDOR_ID_DLINK 0x1186
#define PCI_DEVICE_ID_DLINK_8139 0x1300
#define PCI_VENDOR_ID_XILINX 0x10ee
#define PCI_DEVICE_ID_TURBOPAM 0x4020