From 4e26bc63a01da2ceaf64d8d84e08c8b948b78fed Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Fri, 16 Apr 2021 00:53:17 +0100 Subject: [PATCH 1/3] net: sun8i-emac: Fix pinmux setup for Allwinner H5 Commit eb5a2b671075 ("net: sun8i-emac: Determine pinmux based on SoC, not EMAC type") switched the pinmux setup over to look at CONFIG_MACH_SUN* symbols, to find the appropriate mux value. Unfortunately this patch missed to check for the H5, which is pin-compatible to the H3, but uses a different Kconfig symbol (because it has ARMv8 vs. ARMv7 cores). Replace the pure SUN8I_H3 symbol with the joint SUNXI_H3_H5 one, which is there to cover the peripherals common to both SoCs. Also explicitly list each supported SoC, and have an error message in the fallback case, to avoid those problems in the future. This fixes Ethernet support on all H5 boards. Signed-off-by: Andre Przywara Tested-by: Samuel Holland # Orange Pi PC2 Reviewed-by: Ramon Fried --- drivers/net/sun8i_emac.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index a6cdda81a7..5a1b38bf80 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -554,7 +554,7 @@ static int parse_phy_pins(struct udevice *dev) * The GPIO pinmux value is an integration choice, so depends on the * SoC, not the EMAC variant. */ - if (IS_ENABLED(CONFIG_MACH_SUN8I_H3)) + if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5)) iomux = SUN8I_IOMUX_H3; else if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) iomux = SUN8I_IOMUX_R40; @@ -562,8 +562,12 @@ static int parse_phy_pins(struct udevice *dev) iomux = SUN8I_IOMUX_H6; else if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) iomux = SUN8I_IOMUX_H616; - else + else if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T)) iomux = SUN8I_IOMUX; + else if (IS_ENABLED(CONFIG_MACH_SUN50I)) + iomux = SUN8I_IOMUX; + else + BUILD_BUG_ON_MSG(1, "missing pinmux value for Ethernet pins"); for (i = 0; ; i++) { int pin; From 9e18024ad4130c8c85abe0a0872340b919c20dd0 Mon Sep 17 00:00:00 2001 From: Ivan Uvarov Date: Mon, 19 Apr 2021 12:30:57 +0300 Subject: [PATCH 2/3] sunxi: DT: R40: Update device tree files from Linux 5.12 Update R40 .dts{,i} and dt-binding headers to current version from kernel. Files taken from Linux 5.12-rc1 release (commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8) Signed-off-by: Ivan Uvarov Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 23 +- arch/arm/dts/sun8i-r40.dtsi | 375 ++++++++++++++++-- arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 12 +- include/dt-bindings/clock/sun8i-r40-ccu.h | 6 +- .../interrupt-controller/arm-gic.h | 5 +- include/dt-bindings/thermal/thermal.h | 3 +- 6 files changed, 375 insertions(+), 49 deletions(-) diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts index c488aaacbd..a6a1087a0c 100644 --- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&ir0 { + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; @@ -201,10 +205,15 @@ &pio { pinctrl-names = "default"; pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; }; ®_aldo2 { - regulator-always-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc-pa"; @@ -218,16 +227,16 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index 06b685869f..d5ad3b9efd 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -44,8 +44,10 @@ #include #include #include +#include #include #include +#include / { #address-cells = <1>; @@ -78,25 +80,25 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -109,6 +111,22 @@ status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal: gpu-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -118,11 +136,11 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; - reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + reg = <0x01000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -172,6 +190,48 @@ }; }; + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-r40-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + /* + * NOTE: Contrary to what datasheet claims, + * DRAM deinterlace gate doesn't exist and + * it's shared with CSI1. + */ + <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = ; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-r40-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-r40-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -180,6 +240,69 @@ interrupts = ; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-r40-dma", + "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <16>; + dma-requests = <31>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + spi0: spi@1c05000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + csi0: csi@1c09000 { + compatible = "allwinner,sun8i-r40-csi0", + "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; + resets = <&ccu RST_BUS_CSI0>; + interconnects = <&mbus 5>; + interconnect-names = "dma-mem"; + status = "disabled"; + }; + + video-codec@1c0e000 { + compatible = "allwinner,sun8i-r40-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; @@ -266,6 +389,38 @@ #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + + spi2: spi@1c17000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c17000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + reset-names = "ahci"; + status = "disabled"; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; @@ -312,6 +467,19 @@ status = "disabled"; }; + spi3: spi@1c1f000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; @@ -322,8 +490,7 @@ }; rtc: rtc@1c20400 { - compatible = "allwinner,sun8i-r40-rtc", - "allwinner,sun8i-h3-rtc"; + compatible = "allwinner,sun8i-r40-rtc"; reg = <0x01c20400 0x400>; interrupts = ; clock-output-names = "osc32k", "osc32k-out"; @@ -347,6 +514,20 @@ function = "clk_out_a"; }; + /omit-if-no-ref/ + csi0_8bits_pins: csi0-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE1"; + function = "csi0"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -365,6 +546,36 @@ function = "i2c0"; }; + i2c1_pins: i2c1-pins { + pins = "PB18", "PB19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PB20", "PB21"; + function = "i2c2"; + }; + + i2c3_pins: i2c3-pins { + pins = "PI0", "PI1"; + function = "i2c3"; + }; + + i2c4_pins: i2c4-pins { + pins = "PI2", "PI3"; + function = "i2c4"; + }; + + ir0_pins: ir0-pins { + pins = "PB4"; + function = "ir0"; + }; + + ir1_pins: ir1-pins { + pins = "PB23"; + function = "ir1"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -390,6 +601,36 @@ bias-pull-up; }; + /omit-if-no-ref/ + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pc_pin: spi0-cs0-pc-pin { + pins = "PC23"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pi_pins: spi1-pi-pins { + pins = "PI17", "PI18", "PI19"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pi_pin: spi1-cs0-pi-pin { + pins = "PI16"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs1_pi_pin: spi1-cs1-pi-pin { + pins = "PI15"; + function = "spi1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; @@ -409,6 +650,45 @@ wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = ; + clocks = <&osc24M>; + }; + + ir0: ir@1c21800 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21800 0x400>; + pinctrl-0 = <&ir0_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR0>; + status = "disabled"; + }; + + ir1: ir@1c21c00 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21c00 0x400>; + pinctrl-0 = <&ir1_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR1>; + status = "disabled"; + }; + + ths: thermal-sensor@1c24c00 { + compatible = "allwinner,sun8i-r40-ths"; + reg = <0x01c24c00 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = ; + resets = <&ccu RST_BUS_THS>; + /* TODO: add nvmem-cells for calibration */ + #thermal-sensor-cells = <1>; }; uart0: serial@1c28000 { @@ -518,6 +798,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -529,6 +811,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -540,6 +824,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -551,22 +837,33 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - ahci: sata@1c18000 { - compatible = "allwinner,sun8i-r40-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; - resets = <&ccu RST_BUS_SATA>; - resets-name = "ahci"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; }; gmac: ethernet@1c50000 { @@ -588,6 +885,16 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-r40-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 155>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x40000000 0x80000000>; + #interconnect-cells = <1>; + }; + tcon_top: tcon-top@1c70000 { compatible = "allwinner,sun8i-r40-tcon-top"; reg = <0x01c70000 0x1000>; @@ -614,12 +921,9 @@ #size-cells = <0>; tcon_top_mixer0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon_top_mixer0_in_mixer0: endpoint@0 { - reg = <0>; + tcon_top_mixer0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon_top>; }; }; @@ -713,7 +1017,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c73000 0x1000>; interrupts = ; - clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV0>; reset-names = "lcd"; @@ -756,7 +1060,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c74000 0x1000>; interrupts = ; - clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV1>; reset-names = "lcd"; @@ -798,7 +1102,7 @@ gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -818,7 +1122,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -843,7 +1147,7 @@ compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, - <&ccu 7>, <&ccu 16>; + <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>; clock-names = "bus", "mod", "pll-0", "pll-1"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -851,6 +1155,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 15c22b06fc..47954551f5 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -120,7 +120,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; @@ -198,16 +198,16 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h index 4fa5f69fc2..d7337b55a4 100644 --- a/include/dt-bindings/clock/sun8i-r40-ccu.h +++ b/include/dt-bindings/clock/sun8i-r40-ccu.h @@ -43,6 +43,10 @@ #ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_ #define _DT_BINDINGS_CLK_SUN8I_R40_H_ +#define CLK_PLL_VIDEO0 7 + +#define CLK_PLL_VIDEO1 16 + #define CLK_CPU 24 #define CLK_BUS_MIPI_DSI 29 @@ -172,7 +176,7 @@ #define CLK_AVS 152 #define CLK_HDMI 153 #define CLK_HDMI_SLOW 154 - +#define CLK_MBUS 155 #define CLK_DSI_DPHY 156 #define CLK_TVE0 157 #define CLK_TVE1 158 diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h index 1ea1b702fe..35b6f69b7d 100644 --- a/include/dt-bindings/interrupt-controller/arm-gic.h +++ b/include/dt-bindings/interrupt-controller/arm-gic.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ /* * This header provides constants for the ARM GIC. */ @@ -7,14 +8,14 @@ #include -/* interrupt specific cell 0 */ +/* interrupt specifier cell 0 */ #define GIC_SPI 0 #define GIC_PPI 1 /* * Interrupt specifier cell 2. - * The flaggs in irq.h are valid, plus those below. + * The flags in irq.h are valid, plus those below. */ #define GIC_CPU_MASK_RAW(x) ((x) << 8) #define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1) diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h index b5e6b0069a..bc7babb1a6 100644 --- a/include/dt-bindings/thermal/thermal.h +++ b/include/dt-bindings/thermal/thermal.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * This header provides constants for most thermal bindings. * * Copyright (C) 2013 Texas Instruments * Eduardo Valentin - * - * GPLv2 only */ #ifndef _DT_BINDINGS_THERMAL_THERMAL_H From 647b392bf20614006917d5fcd3390347a668eee5 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Sat, 17 Apr 2021 22:55:19 +0100 Subject: [PATCH 3/3] sunxi: DT: A64: Update devicetree files from Linux 5.12 Import updated devicetree files from the Linux v5.12 release. Besides some node and audio port renames this changes the PHY modes to either rgmii-id or rgmii-txid. From the board files the Pinephone sees a lot of updates. This also adds the long missing USB PHY property for controller 0, which allows the U-Boot PHY driver to eventually use port 0 in host mode (pending another U-Boot patch). Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- arch/arm/dts/sun50i-a64-bananapi-m64.dts | 16 ++-- arch/arm/dts/sun50i-a64-nanopi-a64.dts | 2 +- arch/arm/dts/sun50i-a64-orangepi-win.dts | 10 +-- arch/arm/dts/sun50i-a64-pine64-lts.dts | 15 ++++ arch/arm/dts/sun50i-a64-pine64-plus.dts | 2 +- arch/arm/dts/sun50i-a64-pine64.dts | 8 +- arch/arm/dts/sun50i-a64-pinebook.dts | 13 ++- arch/arm/dts/sun50i-a64-pinephone-1.0.dts | 7 +- arch/arm/dts/sun50i-a64-pinephone-1.1.dts | 7 +- arch/arm/dts/sun50i-a64-pinephone-1.2.dts | 16 +++- arch/arm/dts/sun50i-a64-pinephone.dtsi | 90 +++++++++++++++---- .../dts/sun50i-a64-pinetab-early-adopter.dts | 26 ++++++ arch/arm/dts/sun50i-a64-pinetab.dts | 13 ++- arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 11 +-- arch/arm/dts/sun50i-a64-sopine.dtsi | 3 +- arch/arm/dts/sun50i-a64-teres-i.dts | 12 +-- arch/arm/dts/sun50i-a64.dtsi | 40 ++++++--- 17 files changed, 215 insertions(+), 76 deletions(-) create mode 100644 arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts index 883f217efb..f7fe9fa50c 100644 --- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts @@ -36,18 +36,18 @@ leds { compatible = "gpio-leds"; - pwr-led { + led-0 { label = "bananapi-m64:red:pwr"; gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ default-state = "on"; }; - green { + led-1 { label = "bananapi-m64:green:user"; gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ }; - blue { + led-2 { label = "bananapi-m64:blue:user"; gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ }; @@ -105,7 +105,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; @@ -331,10 +331,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts index e58db8a6ca..09b3c7fb82 100644 --- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts +++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "nanopi-a64:blue:status"; gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ }; diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index fde9c7a99b..70e31743f0 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -120,7 +120,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_gmac_3v3>; status = "okay"; @@ -330,10 +330,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm/dts/sun50i-a64-pine64-lts.dts b/arch/arm/dts/sun50i-a64-pine64-lts.dts index 302e24be0a..596a259074 100644 --- a/arch/arm/dts/sun50i-a64-pine64-lts.dts +++ b/arch/arm/dts/sun50i-a64-pine64-lts.dts @@ -1,10 +1,25 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (c) 2018 ARM Ltd. +#include #include "sun50i-a64-sopine-baseboard.dts" / { model = "Pine64 LTS"; compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + }; +}; + +&mmc0 { + broken-cd; /* card detect is broken on *some* boards */ }; diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index b26181cf90..b54099b654 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -13,7 +13,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; phy-handle = <&ext_rgmii_phy>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index 2165f238af..329cf27656 100644 --- a/arch/arm/dts/sun50i-a64-pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -261,11 +261,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts index 64b1c54f87..7ae16541d1 100644 --- a/arch/arm/dts/sun50i-a64-pinebook.dts +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -126,8 +126,6 @@ }; &ehci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -169,6 +167,7 @@ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; + max-frequency = <200000000>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -177,8 +176,6 @@ }; &ohci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -374,15 +371,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts index 0c42272106..fb65319a3b 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts @@ -7,5 +7,10 @@ / { model = "Pine64 PinePhone Developer Batch (1.0)"; - compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; +}; + +&sgm3140 { + enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ + flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ }; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts index 3e99a87e9c..5e59d37521 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Braveheart (1.1)"; - compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64"; }; &backlight { @@ -28,3 +28,8 @@ num-interpolated-steps = <50>; default-brightness-level = <400>; }; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts index a9f5b670c9..4e7e237cb4 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts @@ -7,7 +7,12 @@ / { model = "Pine64 PinePhone (1.2)"; - compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64"; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &backlight { @@ -38,3 +43,12 @@ interrupt-parent = <&pio>; interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ }; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; +}; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi index 25150aba74..9f69d489a8 100644 --- a/arch/arm/dts/sun50i-a64-pinephone.dtsi +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &rtl8723cs; serial0 = &uart0; }; @@ -20,6 +21,7 @@ compatible = "pwm-backlight"; pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + power-supply = <®_ps>; /* Backlight configuration differs per PinePhone revision. */ }; @@ -30,25 +32,51 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ }; - green { + led-1 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; - red { + led-2 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ }; }; + reg_ps: ps-regulator { + compatible = "regulator-fixed"; + regulator-name = "ps"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + + sgm3140: led-controller { + compatible = "sgmicro,sgm3140"; + vin-supply = <®_dcdc1>; + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + }; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ @@ -142,15 +170,23 @@ status = "okay"; /* Magnetometer */ - lis3mdl: lis3mdl@1e { + lis3mdl: magnetometer@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; vddio-supply = <®_dldo1>; }; + /* Light/proximity sensor */ + light-sensor@48 { + compatible = "sensortek,stk3311"; + reg = <0x48>; + interrupt-parent = <&pio>; + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ + }; + /* Accelerometer/gyroscope */ - mpu6050@68 { + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&pio>; @@ -167,6 +203,7 @@ &lradc { vref-supply = <®_aldo3>; + wakeup-source; status = "okay"; button-200 { @@ -195,6 +232,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -251,10 +302,6 @@ #include "axp803.dtsi" -&ac_power_supply { - status = "okay"; -}; - &battery_power_supply { status = "okay"; }; @@ -274,8 +321,8 @@ ®_aldo3 { regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-name = "vcc-pll-avcc"; }; @@ -392,10 +439,10 @@ "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone", "MBIAS", "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", @@ -408,6 +455,19 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723cs-bt"; + device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */ + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; +}; + /* Connected to the modem (hardware flow control can't be used) */ &uart3 { pinctrl-names = "default"; diff --git a/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts b/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts new file mode 100644 index 0000000000..6265360ce6 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Icenowy Zheng + * + */ + +/dts-v1/; + +#include "sun50i-a64-pinetab.dts" + +/ { + model = "PineTab, Early Adopter's version"; + compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64"; +}; + +&dsi { + /delete-node/ panel@0; + + panel@0 { + compatible = "feixin,k101-im2byl02", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_dc1sw>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + backlight = <&backlight>; + }; +}; diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts index dc4ab6b434..422a8507f6 100644 --- a/arch/arm/dts/sun50i-a64-pinetab.dts +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -14,7 +14,7 @@ #include / { - model = "PineTab"; + model = "PineTab, Development Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; aliases { @@ -122,9 +122,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; @@ -421,15 +418,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6..e22b94c836 100644 --- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts @@ -79,7 +79,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; @@ -111,6 +111,7 @@ bus-width = <8>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; status = "okay"; }; @@ -159,11 +160,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi index c48692b06e..df62044ff7 100644 --- a/arch/arm/dts/sun50i-a64-sopine.dtsi +++ b/arch/arm/dts/sun50i-a64-sopine.dtsi @@ -32,10 +32,9 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */ status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index f5df5f705b..f0a16f355e 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -52,12 +52,12 @@ leds { compatible = "gpio-leds"; - capslock { + led-0 { label = "teres-i:green:capslock"; gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ }; - numlock { + led-1 { label = "teres-i:green:numlock"; gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ }; @@ -340,10 +340,10 @@ "Microphone", "Internal Microphone", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 8dfbcd1440..57786fc120 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -51,7 +51,7 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -62,7 +62,7 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -73,7 +73,7 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -84,7 +84,7 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -139,10 +139,10 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC"; + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC"; status = "disabled"; cpudai: simple-audio-card,cpu { @@ -157,6 +157,7 @@ timer { compatible = "arm,armv8-timer"; allwinner,erratum-unknown1; + arm,no-tick-in-suspend; interrupts = , ; reset-names = "ahb"; interrupts = ; - max-frequency = <200000000>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -592,6 +593,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -602,6 +605,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -845,6 +850,20 @@ status = "disabled"; }; + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "rx", "tx"; + dmas = <&dma 27>, <&dma 27>; + status = "disabled"; + }; + dai: dai@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-codec-i2s"; @@ -860,7 +879,8 @@ codec: codec@1c22e00 { #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-a33-codec"; + compatible = "allwinner,sun50i-a64-codec", + "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; interrupts = ; clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;