m68k: Remove M5271EVB and idmr board support
CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it as 1000000 and idmr.h defines it as (50000000 / 64). When compiling these two boards, a warning message is displayed: time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000 and should not be defined by platforms" [-Wcpp] There are no board maintainers for them so this commit just deletes them. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jason Jin <Jason.jin@freescale.com>
This commit is contained in:
Masahiro Yamada
committed by
Tom Rini
Tom Rini
parent
247161b816
commit
ba650e9b52
@@ -1,234 +0,0 @@
|
||||
/*
|
||||
* Configuation settings for the Freescale M5271EVB
|
||||
*
|
||||
* Based on MC5272C3 and r5200 board configs
|
||||
* (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
|
||||
* (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef _M5271EVB_H
|
||||
#define _M5271EVB_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_MCF52x2 /* define processor family */
|
||||
#define CONFIG_M5271 /* define processor type */
|
||||
#define CONFIG_M5271EVB /* define board type */
|
||||
|
||||
#define CONFIG_MCFTMR
|
||||
|
||||
#define CONFIG_MCFUART
|
||||
#define CONFIG_SYS_UART_PORT (0)
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#undef CONFIG_WATCHDOG /* disable watchdog */
|
||||
|
||||
/* Configuration for environment
|
||||
* Environment is embedded in u-boot in the second sector of the flash
|
||||
*/
|
||||
#ifndef CONFIG_MONITOR_IS_IN_RAM
|
||||
#define CONFIG_ENV_OFFSET 0x4000
|
||||
#else
|
||||
#define CONFIG_ENV_ADDR 0xffe04000
|
||||
#endif
|
||||
#define CONFIG_ENV_SECT_SIZE 0x2000
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_FLASH
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MEMORY
|
||||
#define CONFIG_CMD_MISC
|
||||
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_LOADB
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
|
||||
|
||||
#define CONFIG_MCFFEC
|
||||
#ifdef CONFIG_MCFFEC
|
||||
# define CONFIG_MII 1
|
||||
# define CONFIG_MII_INIT 1
|
||||
# define CONFIG_SYS_DISCOVER_PHY
|
||||
# define CONFIG_SYS_RX_ETH_BUFFER 8
|
||||
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
|
||||
# define CONFIG_SYS_FEC0_PINMUX 0
|
||||
# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
|
||||
# define MCFFEC_TOUT_LOOP 50000
|
||||
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
|
||||
# ifndef CONFIG_SYS_DISCOVER_PHY
|
||||
# define FECDUPLEX FULL
|
||||
# define FECSPEED _100BASET
|
||||
# else
|
||||
# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
# endif
|
||||
# endif /* CONFIG_SYS_DISCOVER_PHY */
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_FSL
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 80000
|
||||
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300
|
||||
#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
|
||||
|
||||
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
|
||||
#define CONFIG_BOOTFILE "u-boot.bin"
|
||||
#ifdef CONFIG_MCFFEC
|
||||
# define CONFIG_NET_RETRY_COUNT 5
|
||||
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
|
||||
# define CONFIG_IPADDR 192.162.1.2
|
||||
# define CONFIG_NETMASK 255.255.255.0
|
||||
# define CONFIG_SERVERIP 192.162.1.1
|
||||
# define CONFIG_GATEWAYIP 192.162.1.1
|
||||
# define CONFIG_OVERWRITE_ETHADDR_ONCE
|
||||
#endif /* FEC_ENET */
|
||||
|
||||
#define CONFIG_HOSTNAME M5271EVB
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"loadaddr=10000\0" \
|
||||
"uboot=u-boot.bin\0" \
|
||||
"load=tftp $loadaddr $uboot\0" \
|
||||
"upd=run load; run prog\0" \
|
||||
"prog=prot off ffe00000 ffe3ffff;" \
|
||||
"era ffe00000 ffe3ffff;" \
|
||||
"cp.b $loadaddr ffe00000 $filesize;" \
|
||||
"save\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00100000
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x400
|
||||
#define CONFIG_SYS_MEMTEST_END 0x380000
|
||||
|
||||
#define CONFIG_SYS_HZ 1000000
|
||||
|
||||
/* Clock configuration
|
||||
* The external oscillator is a 25.000 MHz
|
||||
* CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk)
|
||||
* bus_clk = (cpu_clk/2) (fixed ratio)
|
||||
*
|
||||
* If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to
|
||||
* match the new clock speed. Max cpu_clk is 150 MHz.
|
||||
*/
|
||||
#define CONFIG_SYS_CLK 100000000
|
||||
#define CONFIG_SYS_MCF_SYNCR (MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1)
|
||||
|
||||
/*
|
||||
* Low Level Configuration Settings
|
||||
* (address mappings, register initial values, etc.)
|
||||
* You should know what you are doing if you make changes here.
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */
|
||||
|
||||
/*
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
/*
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xffe00000
|
||||
|
||||
#ifdef CONFIG_MONITOR_IS_IN_RAM
|
||||
#define CONFIG_SYS_MONITOR_BASE 0x20000
|
||||
#else
|
||||
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x40000
|
||||
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
|
||||
#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization ??
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
|
||||
|
||||
/* FLASH organization */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
|
||||
|
||||
#define CONFIG_SYS_FLASH_CFI 1
|
||||
#define CONFIG_FLASH_CFI_DRIVER 1
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x200000
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 16
|
||||
|
||||
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
||||
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
||||
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
|
||||
#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
|
||||
CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
|
||||
CF_ACR_EN | CF_ACR_SM_ALL)
|
||||
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
|
||||
CF_CACR_DISD | CF_CACR_INVI | \
|
||||
CF_CACR_CEIB | CF_CACR_DCM | \
|
||||
CF_CACR_EUSP)
|
||||
|
||||
/* Chip Select 0 : Boot Flash */
|
||||
#define CONFIG_SYS_CS0_BASE 0xFFE00000
|
||||
#define CONFIG_SYS_CS0_MASK 0x001F0001
|
||||
#define CONFIG_SYS_CS0_CTRL 0x00001980
|
||||
|
||||
/* Chip Select 1 : External SRAM */
|
||||
#define CONFIG_SYS_CS1_BASE 0x30000000
|
||||
#define CONFIG_SYS_CS1_MASK 0x00070001
|
||||
#define CONFIG_SYS_CS1_CTRL 0x00001900
|
||||
|
||||
#endif /* _M5271EVB_H */
|
||||
@@ -1,240 +0,0 @@
|
||||
/*
|
||||
* Configuration settings for the iDMR board
|
||||
*
|
||||
* Based on MC5272C3, r5200 and M5271EVB board configs
|
||||
* (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
* (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
|
||||
* (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _IDMR_H
|
||||
#define _IDMR_H
|
||||
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_MCF52x2 /* define processor family */
|
||||
#define CONFIG_M5271 /* define processor type */
|
||||
#define CONFIG_IDMR /* define board type */
|
||||
|
||||
#undef CONFIG_WATCHDOG /* disable watchdog */
|
||||
|
||||
/*
|
||||
* Default environment settings
|
||||
*/
|
||||
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
#define CONFIG_MCFUART
|
||||
#define CONFIG_SYS_UART_PORT (0)
|
||||
#define CONFIG_BAUDRATE 19200
|
||||
#define CONFIG_ETHADDR 00:06:3b:01:41:55
|
||||
#define CONFIG_ETHPRIME
|
||||
#define CONFIG_IPADDR 192.168.30.1
|
||||
#define CONFIG_SERVERIP 192.168.1.1
|
||||
#define CONFIG_ROOTPATH ""
|
||||
#define CONFIG_GATEWAYIP 192.168.1.1
|
||||
#define CONFIG_NETMASK 255.255.0.0
|
||||
#define CONFIG_HOSTNAME idmr
|
||||
#define CONFIG_BOOTFILE "/tftpboot/idmr/uImage"
|
||||
#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root " \
|
||||
"filesystem over NFS; echo"
|
||||
|
||||
#define CONFIG_MCFTMR
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs $(bootargs) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
||||
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
|
||||
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
|
||||
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
|
||||
"$(ramdisk_addr)\0" \
|
||||
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$(serverip):$(rootpath)\0" \
|
||||
"ethact=FEC\0 " \
|
||||
"update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \
|
||||
"cp.b 200000 ff800000 $(filesize);" \
|
||||
"prot on ff800000 ff81ffff\0" \
|
||||
"load=tftp 200000 $(u-boot)\0" \
|
||||
"u-boot=/tftpboot/idmr/u-boot.bin\0" \
|
||||
""
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_JFFS2
|
||||
#define CONFIG_CMD_NET
|
||||
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#undef CONFIG_CMD_LOADB
|
||||
|
||||
|
||||
/*
|
||||
* Low Level Configuration Settings
|
||||
* (address mappings, register initial values, etc.)
|
||||
* You should know what you are doing if you make changes here.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Configuration for environment, which occupies third sector in flash.
|
||||
*/
|
||||
#ifndef CONFIG_MONITOR_IS_IN_RAM
|
||||
#define CONFIG_ENV_ADDR 0xff820000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#else /* CONFIG_MONITOR_IS_IN_RAM */
|
||||
#define CONFIG_ENV_OFFSET 0x4000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x2000
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#endif /* !CONFIG_MONITOR_IS_IN_RAM */
|
||||
|
||||
#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00100000
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x400
|
||||
#define CONFIG_SYS_MEMTEST_END 0x380000
|
||||
|
||||
#define CONFIG_SYS_HZ (50000000 / 64)
|
||||
#define CONFIG_SYS_CLK 100000000
|
||||
|
||||
#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */
|
||||
|
||||
/*
|
||||
* Ethernet
|
||||
*/
|
||||
#define CONFIG_MCFFEC
|
||||
#ifdef CONFIG_MCFFEC
|
||||
# define CONFIG_MII 1
|
||||
# define CONFIG_MII_INIT 1
|
||||
# define CONFIG_SYS_DISCOVER_PHY
|
||||
# define CONFIG_SYS_RX_ETH_BUFFER 8
|
||||
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
|
||||
# define CONFIG_SYS_FEC0_PINMUX 0
|
||||
# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
|
||||
# define MCFFEC_TOUT_LOOP 50000
|
||||
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
|
||||
# ifndef CONFIG_SYS_DISCOVER_PHY
|
||||
# define FECDUPLEX FULL
|
||||
# define FECSPEED _100BASET
|
||||
# else
|
||||
# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
# endif
|
||||
# endif /* CONFIG_SYS_DISCOVER_PHY */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
/*
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xff800000
|
||||
|
||||
#ifdef CONFIG_MONITOR_IS_IN_RAM
|
||||
#define CONFIG_SYS_MONITOR_BASE 0x20000
|
||||
#else /* !CONFIG_MONITOR_IS_IN_RAM */
|
||||
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
|
||||
#endif /* CONFIG_MONITOR_IS_IN_RAM */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x20000
|
||||
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
|
||||
#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization ??
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
|
||||
|
||||
/* FLASH organization */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
|
||||
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x800000
|
||||
/*
|
||||
* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
||||
*/
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 16
|
||||
|
||||
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
||||
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
||||
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
|
||||
#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
|
||||
CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
|
||||
CF_ACR_EN | CF_ACR_SM_ALL)
|
||||
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
|
||||
CF_CACR_DISD | CF_CACR_INVI | \
|
||||
CF_CACR_CEIB | CF_CACR_DCM | \
|
||||
CF_CACR_EUSP)
|
||||
|
||||
/* Port configuration */
|
||||
#define CONFIG_SYS_FECI2C 0xF0
|
||||
|
||||
|
||||
/* Dynamic MTD partition support */
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
||||
#define CONFIG_FLASH_CFI_MTD
|
||||
#define MTDIDS_DEFAULT "nor0=idmr-0"
|
||||
|
||||
#define MTDPARTS_DEFAULT "mtdparts=idmr-0:128k(u-boot)," \
|
||||
"64k(env)," \
|
||||
"640k(kernel)," \
|
||||
"2m(rootfs)," \
|
||||
"-(user)";
|
||||
|
||||
#if defined(CONFIG_CMD_MII)
|
||||
#error "MII commands don't work on iDMR board and should not be enabled."
|
||||
#endif
|
||||
|
||||
#endif /* _IDMR_H */
|
||||
Reference in New Issue
Block a user