disk: convert CONFIG_DOS_PARTITION to Kconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

include/config_distro_defaults.h

@@ -23,7 +23,6 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_ISO_PARTITION
 #define CONFIG_SUPPORT_RAW_INITRD

include/configs/B4860QDS.h

@@ -675,7 +675,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 #ifdef CONFIG_FMAN_ENET

include/configs/BSC9131RDB.h

@@ -299,7 +299,6 @@ extern unsigned long get_sdram_size(void);
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_DOS_PARTITION
 #define CONFIG_CMD_REGINFO
 
 /*

include/configs/BSC9132QDS.h

@@ -97,7 +97,6 @@
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xC0010000
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
 #define CONFIG_ENV_OVERWRITE
@@ -478,7 +477,6 @@ combinations. this should be removed later
 #endif	/* CONFIG_TSEC_ENET */
 
 #ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
@@ -535,10 +533,6 @@ combinations. this should be removed later
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH

include/configs/C29XPCIE.h

@@ -97,7 +97,6 @@
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
 #define CONFIG_TSEC_ENET

include/configs/CPCI4052.h

@@ -69,8 +69,6 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_EEPROM
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_SUPPORT_VFAT
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

include/configs/M52277EVB.h

@@ -92,7 +92,6 @@
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 #define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
 #define CONFIG_SYS_USB_EHCI_CPU_INIT

include/configs/M5253DEMO.h

@@ -42,7 +42,6 @@
 
 #ifdef CONFIG_CMD_IDE
 /* ATA */
-#	define CONFIG_DOS_PARTITION
 #	define CONFIG_IDE_RESET		1
 #	define CONFIG_IDE_PREINIT	1
 #	define CONFIG_ATAPI

include/configs/M5253EVBE.h

@@ -50,7 +50,6 @@
 #define CONFIG_CMD_IDE
 
 /* ATA */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_IDE_RESET	1
 #define CONFIG_IDE_PREINIT	1
 #define CONFIG_ATAPI

include/configs/M54455EVB.h

@@ -120,7 +120,6 @@
 
 /* ATA configuration */
 #define CONFIG_ISO_PARTITION
-#define CONFIG_DOS_PARTITION
 #define CONFIG_IDE_RESET	1
 #define CONFIG_IDE_PREINIT	1
 #define CONFIG_ATAPI

include/configs/M5475EVB.h

@@ -75,7 +75,6 @@
 #		define CONFIG_CMD_PCI
 #	endif
 #	define CONFIG_PCI_OHCI
-#	define CONFIG_DOS_PARTITION
 
 #	undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #	undef CONFIG_SYS_USB_OHCI_CPU_INIT

include/configs/M5485EVB.h

@@ -69,7 +69,6 @@
 #endif
 
 #ifdef CONFIG_CMD_USB
-#	define CONFIG_DOS_PARTITION
 #	define CONFIG_USB_OHCI_NEW
 #	ifndef CONFIG_CMD_PCI
 #		define CONFIG_CMD_PCI

include/configs/MIP405.h

@@ -326,7 +326,6 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************

include/configs/MPC8308RDB.h

@@ -27,7 +27,6 @@
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/MPC8315ERDB.h

@@ -417,7 +417,6 @@
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/MPC8349ITX.h

@@ -487,7 +487,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
 				|| defined(CONFIG_USB_STORAGE)
-	#define CONFIG_DOS_PARTITION
 	#define CONFIG_SUPPORT_VFAT
 #endif
 

include/configs/MPC837XEMDS.h

@@ -438,7 +438,6 @@ extern int board_pci_host_broken(void);
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -487,7 +486,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/MPC837XERDB.h

@@ -450,7 +450,6 @@
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -499,7 +498,6 @@
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/MPC8536DS.h

@@ -524,7 +524,6 @@
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
@@ -620,10 +619,6 @@
 #endif
 #endif
 
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /*
  * Miscellaneous configurable options
  */

include/configs/MPC8544DS.h

@@ -282,7 +282,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI

include/configs/MPC8569MDS.h

@@ -464,7 +464,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/MPC8572DS.h

@@ -471,7 +471,6 @@
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI

include/configs/MPC8610HPCD.h

@@ -285,7 +285,6 @@
 #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
 #endif
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI

include/configs/MPC8641HPCN.h

@@ -374,7 +374,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI

include/configs/P1010RDB.h

@@ -193,7 +193,6 @@
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
 #define CONFIG_TSEC_ENET
@@ -669,7 +668,6 @@ extern unsigned long get_sdram_size(void);
 #endif /* #ifdef CONFIG_FSL_SATA  */
 
 #ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
@@ -744,7 +742,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 		 || defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Hash command with SHA acceleration supported in hardware */

include/configs/P1022DS.h

@@ -500,7 +500,6 @@
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_MMC
@@ -509,10 +508,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
 #define CONFIG_TSEC_ENET
 #ifdef CONFIG_TSEC_ENET
 

include/configs/P1023RDB.h

@@ -259,7 +259,6 @@ extern unsigned long get_clock_freq(void);
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_DOS_PARTITION
 #endif
 #endif
 

include/configs/P2041RDB.h

@@ -533,7 +533,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -553,7 +552,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -609,7 +607,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Hash command with SHA acceleration supported in hardware */

include/configs/PIP405.h

@@ -284,7 +284,6 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************

include/configs/PLU405.h

@@ -63,8 +63,6 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_EEPROM
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_SUPPORT_VFAT
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

include/configs/PMC440.h

@@ -258,7 +258,6 @@
 #define USB_2_0_DEVICE
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 #define CONFIG_CMD_BSP

include/configs/T102xQDS.h

@@ -620,7 +620,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /*
@@ -636,7 +635,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -657,7 +655,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */

include/configs/T102xRDB.h

@@ -639,7 +639,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /*
@@ -660,7 +659,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */

include/configs/T1040QDS.h

@@ -504,7 +504,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -523,7 +522,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -545,7 +543,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
 

include/configs/T104xRDB.h

@@ -618,7 +618,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -634,7 +633,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -655,7 +653,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */

include/configs/T208xQDS.h

@@ -591,7 +591,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET	   /* need PCIe reset errata */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */
@@ -702,7 +701,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -724,7 +722,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
 

include/configs/T208xRDB.h

@@ -529,7 +529,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */
@@ -652,7 +651,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -673,7 +671,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/T4240QDS.h

@@ -493,7 +493,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -521,7 +520,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK \
 	(!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \

include/configs/T4240RDB.h

@@ -241,7 +241,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -259,7 +258,6 @@
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -681,7 +679,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -703,7 +700,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 

include/configs/TQM5200.h

@@ -107,7 +107,6 @@
 #endif /* #ifndef CONFIG_TQM5200S */
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 /* USB */

include/configs/TQM823L.h

@@ -87,8 +87,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM823M.h

@@ -85,8 +85,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM850L.h

@@ -80,8 +80,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM850M.h

@@ -80,8 +80,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM855L.h

@@ -82,8 +82,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM855M.h

@@ -111,8 +111,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM860L.h

@@ -82,8 +82,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM860M.h

@@ -82,8 +82,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM862L.h

@@ -85,8 +85,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM862M.h

@@ -85,8 +85,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*

include/configs/TQM866M.h

@@ -123,8 +123,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/

include/configs/TQM885D.h

@@ -119,8 +119,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#define CONFIG_DOS_PARTITION
-
 #undef CONFIG_RTC_MPC8xx		/* MPC885 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/

include/configs/UCP1020.h

@@ -378,7 +378,6 @@
 #define CONFIG_CMD_PCI
 
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
 
 /*
@@ -477,10 +476,6 @@
 #define CONFIG_GENERIC_MMC
 #endif
 
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Misc Extra Settings */
 #undef CONFIG_WATCHDOG	/* watchdog disabled */
 

include/configs/a4m072.h

@@ -60,9 +60,6 @@
 
 #undef CONFIG_EEPRO100
 
-/* Partitions */
-#define CONFIG_DOS_PARTITION
-
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER

include/configs/ac14xx.h

@@ -397,7 +397,6 @@
 #endif
 
 #if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 #endif /* defined(CONFIG_CMD_IDE) */
 

include/configs/acadia.h

@@ -154,7 +154,6 @@
 #define CONFIG_USB_OHCI
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 #define CONFIG_SUPPORT_VFAT

include/configs/adp-ag101p.h

@@ -101,7 +101,6 @@
  * SD (MMC) controller
  */
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FTSDC010
 #define CONFIG_FTSDC010_NUMBER		1
 #define CONFIG_FTSDC010_SDIO

include/configs/advantech_dms-ba16.h

@@ -54,7 +54,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
 
 /* USB Configs */
 #define CONFIG_USB_EHCI

include/configs/am3517_crane.h

@@ -76,7 +76,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 #define CONFIG_GENERIC_MMC		1
-#define CONFIG_DOS_PARTITION		1
 
 /*
  * USB configuration

include/configs/am3517_evm.h

@@ -78,7 +78,6 @@
 
 /* SD/MMC */
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 /*
  * USB configuration

include/configs/ap325rxa.h

@@ -15,7 +15,6 @@
 
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_BAUDRATE		38400
 #define CONFIG_BOOTARGS		"console=ttySC2,38400"

include/configs/apalis_imx6.h

@@ -70,7 +70,6 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
 
 #ifdef CONFIG_MX6Q
 #define CONFIG_CMD_SATA

include/configs/apf27.h

@@ -241,7 +241,6 @@
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
 
 /*

include/configs/apx4devkit.h

@@ -21,7 +21,6 @@
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND

include/configs/aria.h

@@ -404,7 +404,6 @@
 #endif
 
 #if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 #endif /* defined(CONFIG_CMD_IDE) */
 

include/configs/at91rm9200ek.h

@@ -142,7 +142,6 @@
 #define CONFIG_USB_ATMEL			1
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
-#define CONFIG_DOS_PARTITION			1
 
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_USB_HOST_BASE

include/configs/at91sam9260ek.h

@@ -149,11 +149,6 @@
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* NOR flash - no real flash on this board */
 #define CONFIG_SYS_NO_FLASH			1
 

include/configs/at91sam9261ek.h

@@ -127,7 +127,6 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
 #ifdef CONFIG_AT91SAM9G10EK

include/configs/at91sam9263ek.h

@@ -265,7 +265,6 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"

include/configs/at91sam9m10g45ek.h

@@ -102,10 +102,6 @@
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII

include/configs/at91sam9n12ek.h

@@ -126,11 +126,6 @@
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_KS8851_MLL
 #define CONFIG_KS8851_MLL_BASEADDR	0x30000000 /* use NCS2 */

include/configs/at91sam9rlek.h

@@ -107,7 +107,6 @@
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Ethernet - not present */

include/configs/at91sam9x5ek.h

@@ -114,11 +114,6 @@
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII

include/configs/atngw100.h

@@ -47,7 +47,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS

include/configs/atngw100mkii.h

@@ -66,7 +66,6 @@
 #define CONFIG_USART_ID			1
 
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS

include/configs/atstk1002.h

@@ -64,7 +64,6 @@
 #define CONFIG_USART_ID			1
 
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS

include/configs/axs10x.h

@@ -85,7 +85,6 @@
  * SD/MMC configuration
  */
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 /*
  * Ethernet PHY configuration

include/configs/bamboo.h

@@ -192,7 +192,6 @@
 #define CONFIG_SUPPORT_VFAT
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 /*-----------------------------------------------------------------------

include/configs/bcm23550_w1d.h

@@ -105,7 +105,6 @@
  * This is necessary for the fatls command to work on an SD card
  * for example.
  */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 
 /* version string, parser, etc */

include/configs/bcm28155_ap.h

@@ -104,7 +104,6 @@
  * This is necessary for the fatls command to work on an SD card
  * for example.
  */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 
 /* version string, parser, etc */

include/configs/bcm_ep_board.h

@@ -60,13 +60,6 @@
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-/*
- * One partition type must be defined for part.c
- * This is necessary for the fatls command to work on an SD card
- * for example.
- */
-#define CONFIG_DOS_PARTITION
-
 /* version string, parser, etc */
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING

include/configs/bf533-stamp.h

@@ -152,7 +152,6 @@
 /* #define CONFIG_STAMP_CF */
 #if defined(CONFIG_STAMP_CF)
 #define CONFIG_MISC_INIT_R
-#define CONFIG_DOS_PARTITION	1
 #undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef  CONFIG_IDE_LED			/* no led for ide supported */
 #undef  CONFIG_IDE_RESET		/* no reset for ide supported */

include/configs/bf537-stamp.h

@@ -184,7 +184,6 @@
 
 #if defined(CONFIG_BFIN_IDE)
 
-#define CONFIG_DOS_PARTITION	1
 /*
  * IDE/ATA stuff
  */

include/configs/bfin_adi_common.h

@@ -21,10 +21,8 @@
 # endif
 # ifdef CONFIG_LIBATA
 #  define CONFIG_CMD_SATA
-#  define CONFIG_DOS_PARTITION
 # endif
 # ifdef CONFIG_MMC
-#  define CONFIG_DOS_PARTITION
 #  define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
 # endif
 # ifdef CONFIG_MMC_SPI
@@ -32,7 +30,6 @@
 # endif
 # ifdef CONFIG_USB
 #  define CONFIG_CMD_USB_STORAGE
-#  define CONFIG_DOS_PARTITION
 # endif
 # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
 #  define CONFIG_CMD_NAND

include/configs/bg0900.h

@@ -11,7 +11,6 @@
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS

include/configs/brppt1.h

@@ -281,7 +281,6 @@ MMCARGS
  * enabled a number of useful commands and support.
  */
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_FS_EXT4
 #define CONFIG_EXT4_WRITE

include/configs/brxre1.h

@@ -127,7 +127,6 @@ BUR_COMMON_ENV \
  * enabled a number of useful commands and support.
  */
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #endif /* CONFIG_MMC, ... */
 

include/configs/canyonlands.h

@@ -395,7 +395,6 @@
 #endif
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 /*-----------------------------------------------------------------------

include/configs/clearfog.h

@@ -47,7 +47,6 @@
 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
 
 /* Partition support */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 
 /* Additional FS support/configuration */

include/configs/cm5200.h

@@ -225,7 +225,6 @@
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00001000
 /* Partitions (for USB) */
-#define CONFIG_DOS_PARTITION	1
 #define CONFIG_ISO_PARTITION	1
 
 /*

include/configs/cm_t35.h

@@ -81,7 +81,6 @@
 					115200}
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 /* USB */
 #define CONFIG_USB_OMAP3

include/configs/cm_t3517.h

@@ -88,7 +88,6 @@
 #define CONFIG_OMAP_GPIO
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 /* USB */
 #define CONFIG_USB_MUSB_AM35X

include/configs/colibri_imx6.h

@@ -68,7 +68,6 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
 
 /* Network */
 #define CONFIG_FEC_MXC

include/configs/colibri_vf.h

@@ -58,7 +58,6 @@
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_RBTREE
 #define CONFIG_LZO

include/configs/controlcenterd.h

@@ -374,7 +374,6 @@
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_DOS_PARTITION
 
 /*
  * For booting Linux, the board info and command line data

include/configs/corenet_ds.h

@@ -549,7 +549,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -567,7 +566,6 @@
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -623,7 +621,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Hash command with SHA acceleration supported in hardware */

include/configs/corvus.h

@@ -102,7 +102,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
 
 /* USB DFU support */
 #define CONFIG_CMD_MTDPARTS

include/configs/cyrus.h

@@ -380,7 +380,6 @@
 #define CONFIG_NET_MULTI
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -398,7 +397,6 @@
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -445,7 +443,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*

include/configs/da850evm.h

@@ -315,14 +315,6 @@
 #define CONFIG_GENERIC_MMC
 #endif
 
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#endif
-
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK

include/configs/db-88f6820-amc.h

@@ -41,7 +41,6 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 
 /* Partition support */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 
 /* Additional FS support/configuration */