Memory configuration changes for ZPC.1900 board
- Fix SDRAM timing on both local bus and 60x bus - Add support for second flash bank (SIMM) - Change boot flash base Patch by Yuli Barcohen, 05 Jun 2005
This commit is contained in:
Wolfgang Denk
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2003-2004 Arabella Software Ltd.
|
||||
* Copyright (C) 2003-2005 Arabella Software Ltd.
|
||||
* Yuli Barcohen <yuli@arabellasw.com>
|
||||
*
|
||||
* U-Boot configuration for Zephyr Engineering ZPC.1900 board.
|
||||
@@ -32,11 +32,7 @@
|
||||
#define CPU_ID_STR "MPC8265"
|
||||
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */
|
||||
|
||||
/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */
|
||||
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
/*
|
||||
@@ -113,7 +109,6 @@
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_ASKENV \
|
||||
| CFG_CMD_DHCP \
|
||||
| CFG_CMD_ECHO \
|
||||
| CFG_CMD_IMMAP \
|
||||
| CFG_CMD_MII \
|
||||
| CFG_CMD_PING \
|
||||
@@ -154,31 +149,30 @@
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
||||
#define CFG_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CFG_LOAD_ADDR 0x400000 /* default load address */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
||||
|
||||
#define CFG_FLASH_BASE 0xFFE00000
|
||||
#define CFG_FLASH_CFI
|
||||
#define CFG_FLASH_CFI_DRIVER
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
||||
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
|
||||
|
||||
#define CFG_DEFAULT_IMMR 0x0F010000
|
||||
|
||||
#define CFG_IMMR 0xF0000000
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_SDRAM_SIZE 64
|
||||
#define CFG_FLSIMM_BASE 0xFC000000
|
||||
#define CFG_LSDRAM_BASE 0xFE000000
|
||||
|
||||
#define CFG_IMMR 0xF0000000
|
||||
#define CFG_LSDRAM_BASE 0xFC000000
|
||||
#define CFG_FLASH_BASE 0xFE000000
|
||||
#define CFG_BCSR 0xFEA00000
|
||||
#define CFG_EEPROM 0xFEB00000
|
||||
#define CFG_FLSIMM_BASE 0xFF000000
|
||||
|
||||
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
||||
#define CFG_FLASH_CFI
|
||||
#define CFG_FLASH_CFI_DRIVER
|
||||
#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */
|
||||
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
|
||||
|
||||
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLSIMM_BASE }
|
||||
|
||||
#define BCSR_PCI_MODE 0x01
|
||||
|
||||
@@ -190,10 +184,10 @@
|
||||
|
||||
/* Hard reset configuration word */
|
||||
#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\
|
||||
HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\
|
||||
HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\
|
||||
HRCW_MODCK_H0101 \
|
||||
) /* 0x16828605 */
|
||||
HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\
|
||||
HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\
|
||||
HRCW_MODCK_H0111 \
|
||||
) /* 0x16848207 */
|
||||
/* No slaves */
|
||||
#define CFG_HRCW_SLAVE1 0
|
||||
#define CFG_HRCW_SLAVE2 0
|
||||
@@ -211,7 +205,7 @@
|
||||
#define CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
@@ -233,14 +227,14 @@
|
||||
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
#define CFG_HID0_INIT 0
|
||||
#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
|
||||
#define CFG_HID0_INIT (HID0_ICFI)
|
||||
#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
|
||||
|
||||
#define CFG_HID2 0
|
||||
|
||||
#define CFG_SIUMCR 0x42200000
|
||||
#define CFG_SYPCR 0xFFFFFFC3
|
||||
#define CFG_BCR 0x90400000
|
||||
#define CFG_BCR 0x90000000
|
||||
#define CFG_SCCR SCCR_DFBRG01
|
||||
|
||||
#define CFG_RMR RMR_CSRE
|
||||
@@ -248,18 +242,23 @@
|
||||
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
|
||||
#define CFG_RCCR 0
|
||||
|
||||
#define CFG_PSDMR 0x014EB45A
|
||||
#define CFG_PSRT 0x0C
|
||||
#define CFG_LSDMR 0x008AB552
|
||||
#define CFG_LSRT 0x0E
|
||||
#define CFG_PSDMR /* 0x834DA43B */0x014DA43A
|
||||
#define CFG_PSRT 0x0F/* 0x0C */
|
||||
#define CFG_LSDMR 0x0085A562
|
||||
#define CFG_LSRT 0x0F
|
||||
#define CFG_MPTPR 0x4000
|
||||
|
||||
#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041
|
||||
#define CFG_PSDRAM_OR 0xFC0028C0
|
||||
#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861
|
||||
#define CFG_LSDRAM_OR 0xFF803480
|
||||
|
||||
#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801
|
||||
#define CFG_OR0_PRELIM 0xFFE00856
|
||||
#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801
|
||||
#define CFG_OR5_PRELIM 0xFFFF03F6
|
||||
#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801
|
||||
#define CFG_OR6_PRELIM 0xFE000856
|
||||
#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801
|
||||
#define CFG_OR6_PRELIM 0xFF000856
|
||||
#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801
|
||||
#define CFG_OR7_PRELIM 0xFFFF83F6
|
||||
|
||||
|
||||
Reference in New Issue
Block a user