arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
This commit is contained in:
Patrick Bruenn
committed by
Stefano Babic
Stefano Babic
parent
8e1d92fdbc
commit
98d62e618b
198
include/configs/mx53cx9020.h
Normal file
198
include/configs/mx53cx9020.h
Normal file
@@ -0,0 +1,198 @@
|
||||
/*
|
||||
* Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
|
||||
* Patrick Bruenn <p.bruenn@beckhoff.com>
|
||||
*
|
||||
* Configuration settings for Beckhoff CX9020.
|
||||
*
|
||||
* Based on Freescale's Linux i.MX mx53loco.h file:
|
||||
* Copyright (C) 2010-2011 Freescale Semiconductor.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
|
||||
#define CONFIG_SYS_FSL_CLK
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
#define CONFIG_MXC_GPIO
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
#define CONFIG_MXC_UART_BASE UART2_BASE
|
||||
|
||||
#define CONFIG_FPGA_COUNT 1
|
||||
|
||||
/* MMC Configs */
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
#define CONFIG_SYS_FSL_ESDHC_NUM 2
|
||||
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
|
||||
/* bootz: zImage/initrd.img support */
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* Eth Configs */
|
||||
#define CONFIG_MII
|
||||
#define IMX_FEC_BASE FEC_BASE_ADDR
|
||||
#define CONFIG_ETHPRIME "FEC0"
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x1F
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX5
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_USB_ETHER_MCS7830
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
#define CONFIG_MXC_USB_PORT 1
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/* Command definition */
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
|
||||
#define CONFIG_LOADADDR 0x70010000 /* loadaddr env var */
|
||||
#define CONFIG_SYS_TEXT_BASE 0x77800000
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"fdt_addr=0x71ff0000\0" \
|
||||
"rdaddr=0x72000000\0" \
|
||||
"console=ttymxc1,115200\0" \
|
||||
"uenv=/boot/uEnv.txt\0" \
|
||||
"optargs=\0" \
|
||||
"cmdline=\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcpart=1\0" \
|
||||
"mmcrootfstype=ext4 rootwait fixrtc\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \
|
||||
"rootfstype=${mmcrootfstype} " \
|
||||
"${cmdline}\0" \
|
||||
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
||||
"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile};" \
|
||||
"setenv rdsize ${filesize}\0" \
|
||||
"loadfdt=echo loading ${fdt_path} ...;" \
|
||||
"load mmc ${bootpart} ${fdt_addr} ${fdt_path}\0" \
|
||||
"mmcboot=mmc dev ${mmcdev}; " \
|
||||
"if mmc rescan; then " \
|
||||
"echo SD/MMC found on device ${mmcdev};" \
|
||||
"echo Checking for: ${uenv} ...;" \
|
||||
"setenv bootpart ${mmcdev}:${mmcpart};" \
|
||||
"if test -e mmc ${bootpart} ${uenv}; then " \
|
||||
"load mmc ${bootpart} ${loadaddr} ${uenv};" \
|
||||
"env import -t ${loadaddr} ${filesize};" \
|
||||
"echo Loaded environment from ${uenv};" \
|
||||
"if test -n ${dtb}; then " \
|
||||
"setenv fdt_file ${dtb};" \
|
||||
"echo Using: dtb=${fdt_file} ...;" \
|
||||
"fi;" \
|
||||
"echo Checking for uname_r in ${uenv}...;" \
|
||||
"if test -n ${uname_r}; then " \
|
||||
"echo Running uname_boot ...;" \
|
||||
"run uname_boot;" \
|
||||
"fi;" \
|
||||
"fi;" \
|
||||
"fi;\0" \
|
||||
"uname_boot="\
|
||||
"setenv bootdir /boot; " \
|
||||
"setenv bootfile vmlinuz-${uname_r}; " \
|
||||
"setenv ccatfile /boot/ccat.rbf; " \
|
||||
"echo loading CCAT firmware from ${ccatfile}; " \
|
||||
"load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \
|
||||
"fpga load 0 ${loadaddr} ${filesize}; " \
|
||||
"if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
|
||||
"echo loading ${bootdir}/${bootfile} ...; " \
|
||||
"run loadimage;" \
|
||||
"setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \
|
||||
"if test -e mmc ${bootpart} ${fdt_path}; then " \
|
||||
"run loadfdt;" \
|
||||
"else " \
|
||||
"echo; echo unable to find ${fdt_file} ...;" \
|
||||
"echo booting legacy ...;"\
|
||||
"run mmcargs;" \
|
||||
"echo debug: [${bootargs}] ... ;" \
|
||||
"echo debug: [bootz ${loadaddr}] ... ;" \
|
||||
"bootz ${loadaddr}; " \
|
||||
"fi;" \
|
||||
"run mmcargs;" \
|
||||
"echo debug: [${bootargs}] ... ;" \
|
||||
"echo debug: [bootz ${loadaddr} - ${fdt_addr}] ... ;" \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"fi;\0"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"run mmcboot;"
|
||||
|
||||
#define CONFIG_ARP_TIMEOUT 200UL
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x70010000
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 2
|
||||
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
||||
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
|
||||
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
|
||||
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
|
||||
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
|
||||
#define CONFIG_ENV_SIZE (8 * 1024)
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
|
||||
/* Framebuffer and LCD */
|
||||
#define CONFIG_PREBOOT
|
||||
#define CONFIG_VIDEO_IPUV3
|
||||
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
||||
#define CONFIG_VIDEO_BMP_RLE8
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_BMP_16BPP
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_IPUV3_CLK 200000000
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Reference in New Issue
Block a user