mx6: add support for el6x board

Custom Board based on MX6 Dual, 1GB RAM and eMMC.

There are two variants of the board with and without
PCIe (ZC5202 and ZC5601).

Signed-off-by: Stefano Babic <sbabic@denx.de>

include/configs/el6x_common.h

@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) Stefano Babic <sbabic@denx.de>
+ *
+ * Configuration settings for the E+L i.MX6Q DO82 board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __EL6Q_COMMON_CONFIG_H
+#define __EL6Q_COMMON_CONFIG_H
+
+#define CONFIG_BOARD_NAME		EL6Q
+
+#include <config_distro_defaults.h>
+#include "mx6_common.h"
+
+#define CONFIG_IMX_THERMAL
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_UART
+
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SPL_SPI_LOAD
+#include "imx6_spl.h"
+#endif
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+
+/* I2C config */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED			100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
+/* Commands */
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		3
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_MXC_UART_BASE	UART2_BASE
+#define CONFIG_BAUDRATE             115200
+
+/* Command definition */
+
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_BOOTZ
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOARD_NAME	EL6Q
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS                                               \
+	"board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
+	"cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
+	"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \
+	"console=" CONFIG_CONSOLE_DEV "\0" 					\
+	"fdtfile=undefined\0" \
+	"fdt_high=0xffffffff\0" \
+	"fdt_addr_r=0x18000000\0" \
+	"fdt_addr=0x18000000\0" \
+	"findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(PXE, PXE, na) \
+	func(DHCP, dhcp, na)
+
+#define CONFIG_BOOTCOMMAND \
+	   "run findfdt; " \
+	   "run distro_bootcmd"
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_ARP_TIMEOUT     200UL
+
+#define CONFIG_CMD_MEMTEST
+
+#define CONFIG_SYS_MEMTEST_START       0x10000000
+#define CONFIG_SYS_MEMTEST_END         0x10800000
+#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
+
+#define CONFIG_STACKSIZE               (128 * 1024)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		1
+#define CONFIG_SYS_MMC_ENV_PART		2
+#define CONFIG_ENV_OFFSET		0x0
+#endif
+
+#endif                         /* __EL6Q_COMMON_CONFIG_H */

include/configs/zc5202.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) Stefano Babic <sbabic@denx.de>
+ *
+ * Configuration settings for the E+L i.MX6Q DO82 board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __EL_ZC5202_H
+#define __EL_ZC5202_H
+
+#define CONFIG_MXC_UART_BASE	UART2_BASE
+#define CONFIG_CONSOLE_DEV		"ttymxc1"
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2"
+
+#define CONFIG_DEFAULT_FDT_FILE	"imx6q-zc5202.dtb"
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
+#include "el6x_common.h"
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE				ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE			MII100
+#define CONFIG_ETHPRIME				"FEC"
+#define CONFIG_FEC_MXC_PHYADDR			0
+#define CONFIG_MV88E6352_SWITCH
+
+#define CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+
+#endif                         /*__EL6Q_CONFIG_H */

include/configs/zc5601.h

@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) Stefano Babic <sbabic@denx.de>
+ *
+ * Configuration settings for the E+L i.MX6Q DO82 board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __EL_ZC5601_H
+#define __EL_ZC5601_H
+
+
+#define CONFIG_MXC_UART_BASE	UART2_BASE
+#define CONFIG_CONSOLE_DEV		"ttymxc1"
+#define CONFIG_MMCROOT			"/dev/mmcblk0p1"
+
+#define CONFIG_DEFAULT_FDT_FILE	"imx6q-zc5601.dtb"
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
+#include "el6x_common.h"
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE				ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE			RGMII
+#define CONFIG_ETHPRIME				"FEC"
+#define CONFIG_FEC_MXC_PHYADDR			0x10
+#define CONFIG_PHYLIB
+#define CONFIG_FEC_FIXED_SPEED			1000 /* No autoneg, fix Gb */
+
+#endif                         /*__EL6Q_CONFIG_H */