Convert CONFIG_BCH to Kconfig

This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-11 09:46:05 -05:00
parent edd1653f04
commit 6ef2f90108
36 changed files with 29 additions and 20 deletions
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -105,7 +105,6 @@
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -31,7 +31,6 @@
 #define CONFIG_MACH_TYPE	MACH_TYPE_KM_KIRKWOOD

 #define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH

 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -154,8 +154,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)

-#define CONFIG_BCH
-
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -22,7 +22,6 @@
 #define CONFIG_KM_BOARD_NAME	"kmcoge5ne"
 #define CONFIG_KM_DEF_NETDEV	"netdev=eth1\0"
 #define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH
 #define CONFIG_NAND_KMETER1
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define NAND_MAX_CHIPS				1
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -52,7 +52,6 @@
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT      64
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -137,7 +137,6 @@
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH

 /* UBI configuration */
 #define CONFIG_SPL_UBI			1
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -88,7 +88,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -17,8 +17,6 @@
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE		0x40200000

-#define CONFIG_BCH
-
 /* call misc_init_r */
 #define CONFIG_MISC_INIT_R

--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -58,7 +58,6 @@
 #define CONFIG_ENV_OFFSET	0x100000

 #define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH
 #define CONFIG_NAND_KMETER1
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define NAND_MAX_CHIPS				1
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -92,7 +92,6 @@
 							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56

--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -64,7 +64,6 @@
 #define CONFIG_SYS_FSMC_NAND_8BIT
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH

 /* UBI/UBI config options */
 #define CONFIG_MTD_DEVICE