ARM: UniPhier: add UniPhier SoC support code
These are used by Panasonic UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
This commit is contained in:
Masahiro Yamada
59
include/configs/ph1_ld4.h
Normal file
59
include/configs/ph1_ld4.h
Normal file
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* Copyright (C) 2012-2014 Panasonic Corporation
|
||||
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __PH1_XXX_H
|
||||
#define __PH1_XXX_H
|
||||
|
||||
/*
|
||||
* Support Card Select
|
||||
*
|
||||
* CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
|
||||
* CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
|
||||
* CPLD is re-programmed for ARIMA board compatibility.
|
||||
* No define - No support card.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
#define CONFIG_PFC_MICRO_SUPPORT_CARD
|
||||
#else
|
||||
#define CONFIG_DCC_MICRO_SUPPORT_CARD
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Serial Configuration
|
||||
* SoC UART : enable CONFIG_UNIPHIER_SERIAL
|
||||
* On-board UART: enable CONFIG_SYS_NS16550_SERIAL
|
||||
*/
|
||||
#if 1
|
||||
#define CONFIG_UNIPHIER_SERIAL
|
||||
#else
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_UNIPHIER_UART_CLK 36864000
|
||||
|
||||
#define CONFIG_SMC911X
|
||||
|
||||
#define CONFIG_DDR_NUM_CH0 1
|
||||
#define CONFIG_DDR_NUM_CH1 1
|
||||
|
||||
#define CONFIG_DDR_FREQ 1600
|
||||
|
||||
/*
|
||||
* Memory Size & Mapping
|
||||
*/
|
||||
/* Physical start address of SDRAM */
|
||||
#define CONFIG_SDRAM0_BASE 0x80000000
|
||||
#define CONFIG_SDRAM0_SIZE 0x10000000
|
||||
#define CONFIG_SDRAM1_BASE 0x90000000
|
||||
#define CONFIG_SDRAM1_SIZE 0x10000000
|
||||
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40000
|
||||
|
||||
#include "uniphier-common.h"
|
||||
|
||||
#endif /* __PH1_XXX_H */
|
||||
61
include/configs/ph1_pro4.h
Normal file
61
include/configs/ph1_pro4.h
Normal file
@@ -0,0 +1,61 @@
|
||||
/*
|
||||
* Copyright (C) 2012-2014 Panasonic Corporation
|
||||
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __PH1_XXX_H
|
||||
#define __PH1_XXX_H
|
||||
|
||||
/*
|
||||
* Support Card Select
|
||||
*
|
||||
* CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
|
||||
* CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
|
||||
* CPLD is re-programmed for ARIMA board compatibility.
|
||||
* No define - No support card.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
#define CONFIG_PFC_MICRO_SUPPORT_CARD
|
||||
#else
|
||||
#define CONFIG_DCC_MICRO_SUPPORT_CARD
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Serial Configuration
|
||||
* SoC UART : enable CONFIG_UNIPHIER_SERIAL
|
||||
* On-board UART: enable CONFIG_SYS_NS16550_SERIAL
|
||||
*/
|
||||
#if 1
|
||||
#define CONFIG_UNIPHIER_SERIAL
|
||||
#else
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_UNIPHIER_UART_CLK 73728000
|
||||
|
||||
#define CONFIG_SMC911X
|
||||
|
||||
#define CONFIG_DDR_NUM_CH0 2
|
||||
#define CONFIG_DDR_NUM_CH1 2
|
||||
|
||||
#define CONFIG_DDR_FREQ 1600
|
||||
|
||||
#define CONFIG_UNIPHIER_SMP
|
||||
|
||||
/*
|
||||
* Memory Size & Mapping
|
||||
*/
|
||||
/* Physical start address of SDRAM */
|
||||
#define CONFIG_SDRAM0_BASE 0x80000000
|
||||
#define CONFIG_SDRAM0_SIZE 0x20000000
|
||||
#define CONFIG_SDRAM1_BASE 0xa0000000
|
||||
#define CONFIG_SDRAM1_SIZE 0x20000000
|
||||
|
||||
#define CONFIG_SPL_TEXT_BASE 0x100000
|
||||
|
||||
#include "uniphier-common.h"
|
||||
|
||||
#endif /* __PH1_XXX_H */
|
||||
61
include/configs/ph1_sld8.h
Normal file
61
include/configs/ph1_sld8.h
Normal file
@@ -0,0 +1,61 @@
|
||||
/*
|
||||
* Copyright (C) 2012-2014 Panasonic Corporation
|
||||
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __PH1_XXX_H
|
||||
#define __PH1_XXX_H
|
||||
|
||||
/*
|
||||
* Support Card Select
|
||||
*
|
||||
* CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
|
||||
* CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
|
||||
* CPLD is re-programmed for ARIMA board compatibility.
|
||||
* No define - No support card.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
#define CONFIG_PFC_MICRO_SUPPORT_CARD
|
||||
#else
|
||||
#define CONFIG_DCC_MICRO_SUPPORT_CARD
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Serial Configuration
|
||||
* SoC UART : enable CONFIG_UNIPHIER_SERIAL
|
||||
* On-board UART: enable CONFIG_SYS_NS16550_SERIAL
|
||||
*/
|
||||
#if 1
|
||||
#define CONFIG_UNIPHIER_SERIAL
|
||||
#else
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_UNIPHIER_UART_CLK 80000000
|
||||
|
||||
#define CONFIG_SMC911X
|
||||
|
||||
#define CONFIG_DDR_NUM_CH0 1
|
||||
#define CONFIG_DDR_NUM_CH1 1
|
||||
|
||||
#define CONFIG_DDR_FREQ 1333
|
||||
|
||||
/* #define CONFIG_DDR_STANDARD */
|
||||
|
||||
/*
|
||||
* Memory Size & Mapping
|
||||
*/
|
||||
/* Physical start address of SDRAM */
|
||||
#define CONFIG_SDRAM0_BASE 0x80000000
|
||||
#define CONFIG_SDRAM0_SIZE 0x10000000
|
||||
#define CONFIG_SDRAM1_BASE 0x90000000
|
||||
#define CONFIG_SDRAM1_SIZE 0x10000000
|
||||
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40000
|
||||
|
||||
#include "uniphier-common.h"
|
||||
|
||||
#endif /* __PH1_XXX_H */
|
||||
266
include/configs/uniphier-common.h
Normal file
266
include/configs/uniphier-common.h
Normal file
@@ -0,0 +1,266 @@
|
||||
/*
|
||||
* Copyright (C) 2012-2014 Panasonic Corporation
|
||||
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/* U-boot - Common settings for UniPhier Family */
|
||||
|
||||
#ifndef __CONFIG_UNIPHIER_COMMON_H__
|
||||
#define __CONFIG_UNIPHIER_COMMON_H__
|
||||
|
||||
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \
|
||||
defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
|
||||
# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \
|
||||
are defined. Select only one of them."
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Support card address map
|
||||
*/
|
||||
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
|
||||
# define CONFIG_SUPPORT_CARD_BASE 0x03f00000
|
||||
# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
|
||||
# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000)
|
||||
# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
|
||||
# define CONFIG_SUPPORT_CARD_BASE 0x08000000
|
||||
# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
|
||||
# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630)
|
||||
# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000)
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE
|
||||
#define CONFIG_SYS_NS16550_CLK 12288000
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE -2
|
||||
|
||||
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
|
||||
#define CONFIG_SMC911X_32_BIT
|
||||
|
||||
#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800
|
||||
#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900
|
||||
#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00
|
||||
#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* MMU and Cache Setting
|
||||
*----------------------------------------------------------------------*/
|
||||
|
||||
/* Comment out the following to enable L1 cache */
|
||||
/* #define CONFIG_SYS_ICACHE_OFF */
|
||||
/* #define CONFIG_SYS_DCACHE_OFF */
|
||||
|
||||
/* Comment out the following to enable L2 cache */
|
||||
#define CONFIG_UNIPHIER_L2CACHE_ON
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
#define CONFIG_TIMESTAMP
|
||||
|
||||
/* FLASH related */
|
||||
#define CONFIG_MTD_DEVICE
|
||||
|
||||
/*
|
||||
* uncomment the following to disable FLASH related code.
|
||||
*/
|
||||
/* #define CONFIG_SYS_NO_FLASH */
|
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
||||
#define CONFIG_SYS_MONITOR_BASE 0
|
||||
#define CONFIG_SYS_FLASH_BASE 0
|
||||
|
||||
/*
|
||||
* flash_toggle does not work for out supoort card.
|
||||
* We need to use flash_status_poll.
|
||||
*/
|
||||
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
|
||||
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
||||
|
||||
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
|
||||
# define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000}
|
||||
# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
|
||||
# define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000}
|
||||
# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000}
|
||||
#endif
|
||||
|
||||
/* serial console configuration */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
#if !defined(CONFIG_SPL_BUILD)
|
||||
#define CONFIG_USE_ARCH_MEMSET
|
||||
#define CONFIG_USE_ARCH_MEMCPY
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING /* add command line history */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
|
||||
/*
|
||||
* For NAND booting the environment is embedded in the U-Boot image. Please take
|
||||
* look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
|
||||
*/
|
||||
/* #define CONFIG_ENV_IS_IN_NAND */
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_OFFSET 0x0
|
||||
/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
|
||||
|
||||
/* Time clock 1MHz */
|
||||
#define CONFIG_SYS_TIMER_RATE 1000000
|
||||
|
||||
/*
|
||||
* By default, ARP timeout is 5 sec.
|
||||
* The first ARP request does not seem to work.
|
||||
* So we need to retry ARP request anyway.
|
||||
* We want to shrink the interval until the second ARP request.
|
||||
*/
|
||||
#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_TIME
|
||||
#define CONFIG_CMD_NAND /* NAND flash suppport */
|
||||
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_MAX_CHIPS 2
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
|
||||
|
||||
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
|
||||
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
|
||||
|
||||
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
|
||||
|
||||
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
||||
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
||||
|
||||
/* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
#define CONFIG_AUTOBOOT_KEYED 1
|
||||
#define CONFIG_AUTOBOOT_PROMPT \
|
||||
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
|
||||
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
||||
#define CONFIG_AUTOBOOT_STOP_STR " "
|
||||
|
||||
/*
|
||||
* Network Configuration
|
||||
*/
|
||||
#define CONFIG_ETHADDR 00:21:83:24:00:00
|
||||
#define CONFIG_SERVERIP 192.168.11.1
|
||||
#define CONFIG_IPADDR 192.168.11.10
|
||||
#define CONFIG_GATEWAYIP 192.168.11.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 0x84000000
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_BOOTFILE "fit.itb"
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING /* add command line history */
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run $bootmode"
|
||||
|
||||
#define CONFIG_ROOTPATH "/nfs/root/path"
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs $bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
|
||||
"tftpboot; bootm;"
|
||||
|
||||
#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"image_offset=0x00080000\0" \
|
||||
"image_size=0x00f00000\0" \
|
||||
"verify=n\0" \
|
||||
"autostart=yes\0" \
|
||||
"norboot=run add_default_bootargs;" \
|
||||
"bootm $image_offset\0" \
|
||||
"nandboot=run add_default_bootargs;" \
|
||||
"nand read $loadaddr $image_offset $image_size;" \
|
||||
"bootm\0" \
|
||||
"add_default_bootargs=setenv bootargs $bootargs" \
|
||||
" console=ttyS0,$baudrate\0" \
|
||||
|
||||
/* FIT support */
|
||||
#define CONFIG_FIT
|
||||
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
|
||||
|
||||
/* Open Firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
#define CONFIG_HAVE_ARM_SECURE
|
||||
|
||||
/* Memory Size & Mapping */
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE
|
||||
|
||||
#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
|
||||
/* Thre is no memory hole */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
|
||||
#else
|
||||
#define CONFIG_NR_DRAM_BANKS 2
|
||||
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x84000000
|
||||
|
||||
#if defined(CONFIG_SPL_BUILD)
|
||||
#define CONFIG_BOARD_POSTCLK_INIT
|
||||
#else
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000)
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000)
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000)
|
||||
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
|
||||
|
||||
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
|
||||
Reference in New Issue
Block a user