ARM: Add Support for the VInCo platform
The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with: - an RS-485 port - 2 Ethernet ports - a wireless M-BUS - a 4G modem - a 4MB SPI flash - a 4GB eMMC Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> [rebase on current TOT] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
This commit is contained in:
Gregory CLEMENT
committed by
Andreas Bießmann
Andreas Bießmann
parent
f7cf291aa7
commit
522e4fbb76
167
include/configs/vinco.h
Normal file
167
include/configs/vinco.h
Normal file
@@ -0,0 +1,167 @@
|
||||
/*
|
||||
* Configuration settings for the VInCo platform.
|
||||
*
|
||||
* Based on the settings for the SAMA5-EK board
|
||||
* Copyright (C) 2014 Atmel
|
||||
* Bo Shen <voice.shen@atmel.com>
|
||||
* Copyright (C) 2015 Free Electrons
|
||||
* Gregory CLEMENT gregory.clement@free-electrons.com
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* No NOR flash, this definition should be put before common header */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* The value in the common file is too far away for the VInCo platform */
|
||||
#ifdef CONFIG_SYS_TEXT_BASE
|
||||
#undef CONFIG_SYS_TEXT_BASE
|
||||
#endif
|
||||
#define CONFIG_SYS_TEXT_BASE 0x20f00000
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART3
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART3
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x4000000
|
||||
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
/* SerialFlash */
|
||||
#define CONFIG_CMD_SF
|
||||
|
||||
#ifdef CONFIG_CMD_SF
|
||||
#define CONFIG_ATMEL_SPI
|
||||
#define CONFIG_ATMEL_SPI0
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 50000000
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 50000000
|
||||
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
||||
#define CONFIG_ENV_SPI_MODE (SPI_MODE_0)
|
||||
#endif
|
||||
|
||||
|
||||
/* MMC */
|
||||
#define CONFIG_CMD_MMC
|
||||
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_SUPPORT_EMMC_BOOT
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_GENERIC_ATMEL_MCI
|
||||
#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
|
||||
#define CONFIG_SYS_MMC_CLK_OD 500000
|
||||
|
||||
/* For generating MMC partitions */
|
||||
#define CONFIG_PARTITION_UUIDS
|
||||
#define CONFIG_RANDOM_UUID
|
||||
#define CONFIG_EFI_PARTITION
|
||||
#define CONFIG_CMD_GPT
|
||||
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_ATMEL
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
||||
#define CONFIG_USB_STORAGE
|
||||
#endif
|
||||
|
||||
/* USB device */
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_GADGET_ATMEL_USBA
|
||||
#define CONFIG_USB_ETHER
|
||||
#define CONFIG_USB_ETH_RNDIS
|
||||
#define CONFIG_USBNET_MANUFACTURER "L+G VInCo"
|
||||
|
||||
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#endif
|
||||
|
||||
/* Ethernet Hardware */
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_PHY_SMSC
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_MACB_SEARCH_PHY
|
||||
|
||||
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
#define CONFIG_USB_ETHER_RNDIS
|
||||
|
||||
|
||||
#ifdef CONFIG_SYS_USE_SERIALFLASH
|
||||
/* bootstrap + u-boot + env + linux in serial flash */
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
/* Use our own mapping for the VInCo platform */
|
||||
#undef CONFIG_ENV_OFFSET
|
||||
#undef CONFIG_ENV_SIZE
|
||||
|
||||
#define CONFIG_ENV_OFFSET 0x10000
|
||||
#define CONFIG_ENV_SIZE 0x10000
|
||||
|
||||
/* Update the bootcommand according to our mapping for the VInCo platform */
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \
|
||||
"mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
|
||||
"mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
|
||||
"bootz ${loadaddr} - ${oftaddr}"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"kernel_start=0x20000\0" \
|
||||
"kernel_size=0x800000\0" \
|
||||
"mmcblksize=0x200\0" \
|
||||
"oftaddr=0x21000000\0" \
|
||||
"loadaddr=0x22000000\0" \
|
||||
"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
|
||||
"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
|
||||
"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
|
||||
"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
|
||||
"setenv partitions 'name=kernel,size=${kernel_size}," \
|
||||
"start=${kernel_start};name=rootfs,size=-';" \
|
||||
"gpt write mmc 0 ${partitions} \0"\
|
||||
"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
|
||||
"setexpr fileblksize ${fileblksize} + 1\0" \
|
||||
"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
|
||||
"setexpr k_blksize ${fileblksize};" \
|
||||
"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
|
||||
"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
|
||||
"setexpr dtb_blksize ${fileblksize};" \
|
||||
"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
|
||||
"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
|
||||
"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
|
||||
"bootdelay=0\0"
|
||||
|
||||
#endif
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user