Merge branch 'master' into hpc2
This commit is contained in:
roy zang
Zang Tiefei
@@ -740,8 +740,8 @@
|
||||
#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
|
||||
#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
|
||||
#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
|
||||
#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */
|
||||
#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */
|
||||
#define PVR_440GRX1_RA 0x216218D0 /* 440GRX rev A with Security / Kasumi */
|
||||
#define PVR_440GRX2_RA 0x216218D4 /* 440GRX rev A without Security / Kasumi */
|
||||
#define PVR_440GX_RA 0x51B21850
|
||||
#define PVR_440GX_RB 0x51B21851
|
||||
#define PVR_440GX_RC 0x51B21892
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* (C) Copyright 2006
|
||||
* (C) Copyright 2006-2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
@@ -135,7 +135,7 @@
|
||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo Type \"run kernelx\" to boot the system;" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
@@ -144,7 +144,7 @@
|
||||
"netdev=eth3\0" \
|
||||
"hostname=alpr\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"nfsroot=${serverip}:${rootpath} ${init}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
@@ -170,7 +170,6 @@
|
||||
"ethact=ppc_4xx_eth3\0" \
|
||||
"autoload=no\0" \
|
||||
"ipconfig=dhcp;setenv serverip 11.0.0.152\0" \
|
||||
"actkernel=kernel2\0" \
|
||||
"load_fpga=fpga load 0 ffe00000 10dd9a\0" \
|
||||
"mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \
|
||||
"rootfstype=jffs2 init=/sbin/init\0" \
|
||||
@@ -178,8 +177,10 @@
|
||||
";bootm 200000\0" \
|
||||
"kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \
|
||||
"addtty;bootm 200000\0" \
|
||||
"kernel1=run ipconfig load_fpga kernel1_mtd\0" \
|
||||
"kernel2=run ipconfig load_fpga kernel2_mtd\0" \
|
||||
"kernel1=setenv actkernel 'kernel1';run load_fpga " \
|
||||
"kernel1_mtd\0" \
|
||||
"kernel2=setenv actkernel 'kernel2';run load_fpga " \
|
||||
"kernel2_mtd\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run kernel2"
|
||||
@@ -244,6 +245,7 @@
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_ALT_MEMTEST 1 /* Enable more extensive memtest*/
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
|
||||
@@ -257,6 +257,7 @@
|
||||
"bootfile=/tftpboot/bamboo/uImage\0" \
|
||||
"kernel_addr=fff00000\0" \
|
||||
"ramdisk_addr=fff10000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0" \
|
||||
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
|
||||
"cp.b 100000 fffa0000 60000;" \
|
||||
|
||||
@@ -106,6 +106,7 @@
|
||||
"bootfile=/tftpboot/bubinga/uImage\0" \
|
||||
"kernel_addr=fff80000\0" \
|
||||
"ramdisk_addr=fff90000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
@@ -177,6 +177,7 @@
|
||||
"bootfile=/tftpboot/ebony/uImage\0" \
|
||||
"kernel_addr=ff800000\0" \
|
||||
"ramdisk_addr=ff810000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/ebony/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
@@ -178,6 +178,7 @@
|
||||
"bootfile=/tftpboot/luan/uImage\0" \
|
||||
"kernel_addr=fc000000\0" \
|
||||
"ramdisk_addr=fc100000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/luan/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
345
include/configs/mecp5200.h
Normal file
345
include/configs/mecp5200.h
Normal file
@@ -0,0 +1,345 @@
|
||||
/*
|
||||
* (C) Copyright 2003-2004
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* (c) 2005 esd gmbh Hannover
|
||||
*
|
||||
*
|
||||
* from IceCube.h file
|
||||
* by Reinhard Arlt reinhard.arlt@esd-electronics.com
|
||||
*
|
||||
*************************************************************************/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */
|
||||
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
||||
#define CONFIG_ICECUBE 1 /* ... on IceCube board */
|
||||
#define CONFIG_MECP5200 1 /* ... on MECP5200 board */
|
||||
#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
|
||||
|
||||
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
||||
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
||||
#if 0 /* test-only */
|
||||
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
||||
#else
|
||||
#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */
|
||||
#endif
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
||||
|
||||
|
||||
#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
|
||||
|
||||
#define CONFIG_MII
|
||||
#if 0 /* test-only !!! */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_EEPRO100 1
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_NS8382X 1
|
||||
#endif
|
||||
|
||||
#else /* MPC5100 */
|
||||
|
||||
#endif
|
||||
|
||||
/* Partitions */
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* USB */
|
||||
#if 0
|
||||
#define CONFIG_USB_OHCI
|
||||
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
|
||||
#define CONFIG_USB_STORAGE
|
||||
#else
|
||||
#define ADD_USB_CMD 0
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Supported commands
|
||||
*/
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_EEPROM | \
|
||||
CFG_CMD_FAT | \
|
||||
CFG_CMD_EXT2 | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IDE | \
|
||||
CFG_CMD_BSP | \
|
||||
CFG_CMD_ELF)
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
|
||||
# define CFG_LOWBOOT 1
|
||||
# define CFG_LOWBOOT16 1
|
||||
#endif
|
||||
#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
|
||||
# define CFG_LOWBOOT 1
|
||||
# define CFG_LOWBOOT08 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Autobooting
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Welcome to CBX-CPU5200 (mecp5200);" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
|
||||
"flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
|
||||
"net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
|
||||
"vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
|
||||
"ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
|
||||
"loadaddr=01000000\0" \
|
||||
"serverip=192.168.2.99\0" \
|
||||
"gatewayip=10.0.0.79\0" \
|
||||
"user=mu\0" \
|
||||
"target=mecp5200.esd\0" \
|
||||
"script=mecp5200.bat\0" \
|
||||
"image=/tftpboot/vxWorks_mecp5200\0" \
|
||||
"ipaddr=10.0.13.196\0" \
|
||||
"netmask=255.255.0.0\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
|
||||
|
||||
#if defined(CONFIG_MPC5200)
|
||||
/*
|
||||
* IPB Bus clocking configuration.
|
||||
*/
|
||||
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
|
||||
#endif
|
||||
/*
|
||||
* I2C configuration
|
||||
*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
||||
|
||||
#define CFG_I2C_SPEED 86000 /* 100 kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
/*
|
||||
* EEPROM configuration
|
||||
*/
|
||||
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 5
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
|
||||
#define CFG_I2C_MULTI_EEPROMS 1
|
||||
/*
|
||||
* Flash configuration
|
||||
*/
|
||||
#define CFG_FLASH_BASE 0xFFC00000
|
||||
#define CFG_FLASH_SIZE 0x00400000
|
||||
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000)
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 512
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
||||
|
||||
/*
|
||||
* Environment settings
|
||||
*/
|
||||
#if 1 /* test-only */
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_SIZE 0x10000
|
||||
#define CFG_ENV_SECT_SIZE 0x10000
|
||||
#define CONFIG_ENV_OVERWRITE 1
|
||||
#else
|
||||
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
||||
#define CFG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */
|
||||
#define CFG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars*/
|
||||
/* total size of a CAT24WC32 is 8192 bytes */
|
||||
#define CONFIG_ENV_OVERWRITE 1
|
||||
#endif
|
||||
|
||||
#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
|
||||
#if 0
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
#endif
|
||||
#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */
|
||||
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
||||
#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
|
||||
|
||||
|
||||
/*
|
||||
* Memory map
|
||||
*/
|
||||
#define CFG_MBAR 0xF0000000
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_DEFAULT_MBAR 0x80000000
|
||||
|
||||
/* Use SRAM until RAM will be available */
|
||||
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
||||
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
|
||||
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
# define CFG_RAMBOOT 1
|
||||
#endif
|
||||
|
||||
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Ethernet configuration
|
||||
*/
|
||||
#define CONFIG_MPC5xxx_FEC 1
|
||||
/*
|
||||
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
|
||||
*/
|
||||
/* #define CONFIG_FEC_10MBIT 1 */
|
||||
#define CONFIG_PHY_ADDR 0x00
|
||||
#define CONFIG_UDP_CHECKSUM 1
|
||||
|
||||
|
||||
/*
|
||||
* GPIO configuration
|
||||
*/
|
||||
#define CFG_GPS_PORT_CONFIG 0x01052444
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
|
||||
|
||||
/*
|
||||
* Various low-level settings
|
||||
*/
|
||||
#if defined(CONFIG_MPC5200)
|
||||
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
||||
#define CFG_HID0_FINAL HID0_ICE
|
||||
#else
|
||||
#define CFG_HID0_INIT 0
|
||||
#define CFG_HID0_FINAL 0
|
||||
#endif
|
||||
|
||||
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
||||
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
||||
#define CFG_BOOTCS_CFG 0x00085d00
|
||||
|
||||
#define CFG_CS0_START CFG_FLASH_BASE
|
||||
#define CFG_CS0_SIZE CFG_FLASH_SIZE
|
||||
|
||||
#define CFG_CS1_START 0xfd000000
|
||||
#define CFG_CS1_SIZE 0x00010000
|
||||
#define CFG_CS1_CFG 0x10101410
|
||||
|
||||
#define CFG_CS_BURST 0x00000000
|
||||
#define CFG_CS_DEADCYCLE 0x33333333
|
||||
|
||||
#define CFG_RESET_ADDRESS 0xff000000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* USB stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_USB_CLOCK 0x0001BBBB
|
||||
#define CONFIG_USB_CONFIG 0x00001000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff Supports IDE harddisk
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
||||
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CONFIG_IDE_PREINIT
|
||||
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
||||
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
||||
|
||||
#define CFG_ATA_IDE0_OFFSET 0x0000
|
||||
|
||||
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
|
||||
|
||||
/* Offset for data I/O */
|
||||
#define CFG_ATA_DATA_OFFSET (0x0060)
|
||||
|
||||
/* Offset for normal register accesses */
|
||||
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
|
||||
|
||||
/* Offset for alternate registers */
|
||||
#define CFG_ATA_ALT_OFFSET (0x005C)
|
||||
|
||||
/* Interval between registers */
|
||||
#define CFG_ATA_STRIDE 4
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@@ -192,6 +192,7 @@
|
||||
"bootfile=/tftpboot/ocotea/uImage\0" \
|
||||
"kernel_addr=fff00000\0" \
|
||||
"ramdisk_addr=fff10000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* (C) Copyright 2006
|
||||
* (C) Copyright 2006-2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* Configuation settings for the PDNB3 board.
|
||||
@@ -237,18 +237,19 @@
|
||||
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
|
||||
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
|
||||
#if defined(CONFIG_SCPU)
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
||||
/* no redundant environment on SCPU */
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
||||
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
||||
#else
|
||||
#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
|
||||
#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
|
||||
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
|
||||
#endif
|
||||
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
|
||||
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_SCPU)
|
||||
/*
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* (C) Copyright 2006
|
||||
* (C) Copyright 2006-2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
@@ -23,7 +23,7 @@
|
||||
*/
|
||||
|
||||
/************************************************************************
|
||||
* sequoia.h - configuration for Sequoia board (PowerPC440EPx)
|
||||
* sequoia.h - configuration for Sequoia & Rainier boards
|
||||
***********************************************************************/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
@@ -31,7 +31,7 @@
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
|
||||
/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
|
||||
#ifndef CONFIG_RAINIER
|
||||
#define CONFIG_SEQUOIA 1 /* Board is Sequoia */
|
||||
#define CONFIG_440EPX 1 /* Specific PPC440EPx */
|
||||
@@ -39,7 +39,7 @@
|
||||
#define CONFIG_440GRX 1 /* Specific PPC440GRx */
|
||||
#endif
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
|
||||
#define CONFIG_SYS_CLK_FREQ 33000000 /* external freq to pll */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
|
||||
@@ -222,9 +222,21 @@
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
/* Setup some board specific values for the default environment variables */
|
||||
#ifndef CONFIG_RAINIER
|
||||
#define CONFIG_HOSTNAME sequoia
|
||||
#define CFG_BOOTFILE "bootfile=/tftpboot/sequoia/uImage\0"
|
||||
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
|
||||
#else
|
||||
#define CONFIG_HOSTNAME rainier
|
||||
#define CFG_BOOTFILE "bootfile=/tftpboot/rainier/uImage\0"
|
||||
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CFG_BOOTFILE \
|
||||
CFG_ROOTPATH \
|
||||
"netdev=eth0\0" \
|
||||
"hostname=sequoia\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
@@ -238,13 +250,11 @@
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
|
||||
"bootm\0" \
|
||||
"rootpath=/opt/eldk/ppc_4xxFP\0" \
|
||||
"bootfile=/tftpboot/sequoia/uImage\0" \
|
||||
"kernel_addr=FC000000\0" \
|
||||
"ramdisk_addr=FC180000\0" \
|
||||
"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
|
||||
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
|
||||
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
|
||||
"cp.b 100000 FFFA0000 60000\0" \
|
||||
"cp.b 200000 FFFA0000 60000\0" \
|
||||
"upd=run load;run update\0" \
|
||||
""
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
@@ -349,7 +359,7 @@
|
||||
*----------------------------------------------------------------------*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
|
||||
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
|
||||
|
||||
|
||||
@@ -188,6 +188,7 @@
|
||||
"bootfile=/tftpboot/taishan/uImage\0" \
|
||||
"kernel_addr=fc000000\0" \
|
||||
"ramdisk_addr=fc180000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/taishan/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
@@ -68,6 +68,7 @@
|
||||
"bootfile=/tftpboot/walnut/uImage\0" \
|
||||
"kernel_addr=fff80000\0" \
|
||||
"ramdisk_addr=fff80000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0" \
|
||||
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
|
||||
"cp.b 100000 fffc0000 40000;" \
|
||||
|
||||
@@ -1,340 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2005-2006
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/************************************************************************
|
||||
* yellowstone.h - configuration for YELLOWSTONE board
|
||||
***********************************************************************/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_YOLLOWSTONE 1 /* Board is Yellowstone */
|
||||
#define CONFIG_440GR 1 /* Specific PPC440EP support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
|
||||
#define CONFIG_BOARD_RESET 1 /* call board_reset() */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
|
||||
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
|
||||
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
|
||||
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
|
||||
#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
|
||||
#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
|
||||
|
||||
/*Don't change either of these*/
|
||||
#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/
|
||||
#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/
|
||||
/*Don't change either of these*/
|
||||
|
||||
#define CFG_USB_DEVICE 0x50000000
|
||||
#define CFG_NVRAM_BASE_ADDR 0x80000000
|
||||
#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
|
||||
#define CFG_BOOT_BASE_ADDR 0xf0000000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Initial RAM & stack pointer (placed in SDRAM)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
|
||||
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
|
||||
#define CFG_INIT_RAM_END (8 << 10)
|
||||
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Serial Port
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SERIAL_MULTI 1
|
||||
/*define this if you want console on UART1*/
|
||||
#undef CONFIG_UART1_CONSOLE
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment
|
||||
*----------------------------------------------------------------------*/
|
||||
/*
|
||||
* Define here the location of the environment variables (FLASH or EEPROM).
|
||||
* Note: DENX encourages to use redundant environment in FLASH.
|
||||
*/
|
||||
#if 1
|
||||
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
||||
#else
|
||||
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_FLASH_CFI /* The flash is CFI compatible */
|
||||
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
||||
#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
|
||||
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
|
||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
|
||||
#ifdef CFG_ENV_IS_IN_FLASH
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
|
||||
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
|
||||
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
||||
#endif /* CFG_ENV_IS_IN_FLASH */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* DDR SDRAM
|
||||
*----------------------------------------------------------------------*/
|
||||
#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
|
||||
#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */
|
||||
#define CFG_SDRAM_BANKS (2)
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
#define CFG_I2C_MULTI_EEPROMS
|
||||
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
#ifdef CFG_ENV_IS_IN_EEPROM
|
||||
#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
|
||||
#define CFG_ENV_OFFSET 0x0
|
||||
#endif /* CFG_ENV_IS_IN_EEPROM */
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"hostname=yellowstone\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
|
||||
"flash_nfs=run nfsargs addip addtty;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"flash_self=run ramargs addip addtty;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
|
||||
"bootm\0" \
|
||||
"rootpath=/opt/eldk/ppc_4xx\0" \
|
||||
"bootfile=/tftpboot/yellowstone/uImage\0" \
|
||||
"kernel_addr=fc000000\0" \
|
||||
"ramdisk_addr=fc180000\0" \
|
||||
"load=tftp 100000 /tftpboot/yellowstone/u-boot.bin\0" \
|
||||
"update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
|
||||
"cp.b 100000 fff80000 80000;" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"upd=run load;run update\0" \
|
||||
""
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
#if 0
|
||||
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
||||
#else
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_NET_MULTI 1 /* required for netconsole */
|
||||
#define CONFIG_PHY1_ADDR 3
|
||||
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
||||
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
|
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
||||
|
||||
/* Partitions */
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
|
||||
#ifdef CONFIG_440EP
|
||||
/* USB */
|
||||
#define CONFIG_USB_OHCI
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
/*Comment this out to enable USB 1.1 device*/
|
||||
#define USB_2_0_DEVICE
|
||||
#endif /*CONFIG_440EP*/
|
||||
|
||||
#ifdef DEBUG
|
||||
#define CONFIG_PANIC_HANG
|
||||
#else
|
||||
#define CONFIG_HW_WATCHDOG /* watchdog */
|
||||
#endif
|
||||
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_ASKENV | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DIAG | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_EEPROM | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_NET | \
|
||||
CFG_CMD_NFS | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_REGINFO | \
|
||||
CFG_CMD_SDRAM)
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
#define CONFIG_LYNXKDI 1 /* support kdi files */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
#define CONFIG_LOOPW 1 /* enable loopw command */
|
||||
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
|
||||
|
||||
/* Board-specific PCI */
|
||||
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
|
||||
#define CFG_PCI_TARGET_INIT
|
||||
#define CFG_PCI_MASTER_INIT
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
|
||||
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* External Bus Controller (EBC) Setup
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_FLASH CFG_FLASH_BASE
|
||||
#define CFG_CPLD 0x80000000
|
||||
|
||||
/* Memory Bank 0 (NOR-FLASH) initialization */
|
||||
#define CFG_EBC_PB0AP 0x03017300
|
||||
#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
|
||||
|
||||
/* Memory Bank 2 (CPLD) initialization */
|
||||
#define CFG_EBC_PB2AP 0x04814500
|
||||
#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
|
||||
#define CFG_CACHELINE_SIZE 32 /* ... */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* (C) Copyright 2005-2006
|
||||
* (C) Copyright 2005-2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
@@ -22,7 +22,7 @@
|
||||
*/
|
||||
|
||||
/************************************************************************
|
||||
* yosemite.h - configuration for YOSEMITE board
|
||||
* yosemite.h - configuration for Yosemite & Yellowstone boards
|
||||
***********************************************************************/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
@@ -30,9 +30,16 @@
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_YOSEMITE 1 /* Board is Yosemite */
|
||||
#define CONFIG_440EP 1 /* Specific PPC440EP support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
/* This config file is used for Yosemite (440EP) and Yellowstone (440GR)*/
|
||||
#ifndef CONFIG_YELLOWSTONE
|
||||
#define CONFIG_YOSEMITE 1 /* Board is Yosemite */
|
||||
#define CONFIG_440EP 1 /* Specific PPC440EP support */
|
||||
#define CONFIG_HOSTNAME yosemite
|
||||
#else
|
||||
#define CONFIG_440GR 1 /* Specific PPC440GR support */
|
||||
#define CONFIG_HOSTNAME yellowstone
|
||||
#endif
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
@@ -159,9 +166,21 @@
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
/* Setup some board specific values for the default environment variables */
|
||||
#ifndef CONFIG_YELLOWSTONE
|
||||
#define CONFIG_HOSTNAME yosemite
|
||||
#define CFG_BOOTFILE "bootfile=/tftpboot/yosemite/uImage\0"
|
||||
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
|
||||
#else
|
||||
#define CONFIG_HOSTNAME yellowstone
|
||||
#define CFG_BOOTFILE "bootfile=/tftpboot/yellowstone/uImage\0"
|
||||
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CFG_BOOTFILE \
|
||||
CFG_ROOTPATH \
|
||||
"netdev=eth0\0" \
|
||||
"hostname=yosemite\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
@@ -175,13 +194,12 @@
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
|
||||
"bootm\0" \
|
||||
"rootpath=/opt/eldk/ppc_4xx\0" \
|
||||
"bootfile=/tftpboot/yosemite/uImage\0" \
|
||||
"bootfile=/tftpboot/${hostname}/uImage\0" \
|
||||
"kernel_addr=fc000000\0" \
|
||||
"ramdisk_addr=fc180000\0" \
|
||||
"load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \
|
||||
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
|
||||
"update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
|
||||
"cp.b 100000 fff80000 80000;" \
|
||||
"cp.b 200000 fff80000 80000;" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"upd=run load;run update\0" \
|
||||
""
|
||||
@@ -218,9 +236,15 @@
|
||||
#define CONFIG_USB_OHCI
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
/*Comment this out to enable USB 1.1 device*/
|
||||
/* Comment this out to enable USB 1.1 device */
|
||||
#define USB_2_0_DEVICE
|
||||
#endif /*CONFIG_440EP*/
|
||||
|
||||
#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2)
|
||||
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
#else
|
||||
#define CMD_USB 0 /* no USB on 440GR */
|
||||
#endif /* CONFIG_440EP */
|
||||
|
||||
#ifdef DEBUG
|
||||
#define CONFIG_PANIC_HANG
|
||||
@@ -243,11 +267,7 @@
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_REGINFO | \
|
||||
CFG_CMD_SDRAM | \
|
||||
CFG_CMD_FAT | \
|
||||
CFG_CMD_EXT2 | \
|
||||
CFG_CMD_USB )
|
||||
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
CMD_USB)
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
@@ -178,6 +178,7 @@
|
||||
"bootfile=yucca/uImage\0" \
|
||||
"kernel_addr=E7F10000\0" \
|
||||
"ramdisk_addr=E7F20000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 100000 yuca/u-boot.bin\0" \
|
||||
"update=protect off 2:4-7;era 2:4-7;" \
|
||||
"cp.b ${fileaddr} FFFB0000 ${filesize};" \
|
||||
|
||||
Reference in New Issue
Block a user