#ifndef __CONFIG_H #define __CONFIG_H /*------------------------------------------------------------------------------ Constant -------------------------------------------------------------------------------*/ /* This is columbus2 hardware */ #define CONFIG_ARCH_INFINITY 1 #define CONFIG_ARMCORTEXA7 /* This is an ARM V7 CPU core */ #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ /*#define CONFIG_SYS_ARCH_TIMER 1*/ #define CONFIG_MS_PIU_TIMER 1 #define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_DELAY_STR "\x0d" /* press ENTER to interrupt BOOT */ #define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_BOARD_LATE_INIT #if CONFIG_VERSION_FPGA #define CONFIG_SYS_HZ_CLOCK 12000000 #define CONFIG_UART_CLOCK 12000000 #define CONFIG_BAUDRATE 38400 #else #define CONFIG_SYS_HZ_CLOCK 400000000 #define CONFIG_UART_CLOCK 172800000 #define CONFIG_BAUDRATE 115200 #define CONFIG_PIUTIMER_CLOCK 12000000 #endif /* define baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*------------------------------------------------------------------------------ Macro -------------------------------------------------------------------------------*/ /* boot delay time */ #define CONFIG_BOOTDELAY 0 #define CONFIG_ZERO_BOOTDELAY_CHECK /* #define CONFIG_MS_ANDROID_RECOVERY 1 #define CONFIG_MS_DISPLAY 1 #define CONFIG_MS_SHOW_LOGO 1 #define CONFIG_MS_ISP 1 #define CONFIG_MS_PIUTIMER 1 */ #define CONFIG_SKIP_LOWLEVEL_INIT /*#define CONFIG_DISPLAY_BOARDINFO *//*for checkboard*/ /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4*1024*1024)/* (CONFIG_ENV_SIZE + 512*1024) */ /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "MStar # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ /* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (4*1024*1024) /* regular stack */ /* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x20000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ /* following is a multiple DRAM bank sample*/ /* * Physical Memory Map */ /* #define CONFIG_NR_DRAM_BANKS 4 // we have 2 banks of DRAM * #define PHYS_SDRAM_1 0xa0000000 // SDRAM Bank #1 * #define PHYS_SDRAM_1_SIZE 0x04000000 // 64 MB * #define PHYS_SDRAM_2 0xa4000000 // SDRAM Bank #2 * #define PHYS_SDRAM_2_SIZE 0x00000000 // 0 MB * #define PHYS_SDRAM_3 0xa8000000 // SDRAM Bank #3 * #define PHYS_SDRAM_3_SIZE 0x00000000 // 0 MB * #define PHYS_SDRAM_4 0xac000000 // SDRAM Bank #4 * #define PHYS_SDRAM_4_SIZE 0x00000000 // 0 MB */ #define CONFIG_SYS_MEMTEST_START 0x20000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x24000000 /* 0 ... 64 MB in DRAM */ #define CONFIG_SYS_TEXT_BASE 0x23E00000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE) #define CONFIG_UBOOT_RAM_SIZE 0x04000000 // let us to use only 64MB for uboot /* RAM base address */ #define RAM_START_ADDR 0x20000000 /* RAM size */ #define RAM_SIZE PHYS_SDRAM_1_SIZE /* The address used to save tag list used when kernel is booting */ #define BOOT_PARAMS (RAM_START_ADDR) #define BOOT_PARAMS_LEN 0x2000 /* CFG load address */ #define CONFIG_SYS_LOAD_ADDR (BOOT_PARAMS+BOOT_PARAMS_LEN+0x4000) #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* kernel starting address */ #define KERNEL_RAM_BASE CFG_LOAD_ADDR /* Which block used to save IPL, u-boot and kernel images */ #define IPL_NAND_BLOCK 0 #define UBOOT_NAND_BLOCK 1 #define KERNEL_NAND_BLOCK 2 /* #define CONFIG_CMDLINE_EDITING */ /* #define CONFIG_AUTO_COMPLETE */ /* boot time analysis*/ #define CONFIG_BOOT_TIME_ANALYSIS 0 #define CONFIG_BOOT_TIME_ANALYSIS_USE_RTC 0 #define CONFIG_SYS_NO_FLASH 1 #ifdef CONFIG_MS_ISP_FLASH #define CONFIG_CMD_SF #ifdef CONFIG_MS_SAVE_ENV_IN_ISP_FLASH #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ /* bottom 4KB of available space in Uboot */ /* 0x40000 reserved for UBoot, 0x40000 maximum storage size of uboot */ #define CONFIG_ENV_OFFSET 0x40000+0x40000-0x1000 #endif #endif /* * File system, NAND flash, SD/MMC */ /* * FLASH driver setup */ #ifdef CONFIG_MS_SDMMC #define CONFIG_CMD_FAT #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_DOS_PARTITION #define CONFIG_MS_SDMMC_MAX_READ_BLOCKS 1024 #endif #ifdef CONFIG_MS_NAND #if defined(CONFIG_MS_SAVE_ENV_IN_NAND_FLASH) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET CONFIG_MSTAR_ENV_NAND_OFFSET #define CONFIG_MSTAR_ENV_NAND_OFFSET ms_nand_env_offset #define CONFIG_ENV_SIZE 0x00020000 #endif #define CONFIG_CMD_UBI /* #define CONFIG_CMD_UBIFS */ #define CONFIG_UBI_MWRITE #define MTDIDS_DEFAULT "nand0=nand0" /* "nor0=physmap-flash.0,nand0=nand" */ #define MTDPARTS_DEFAULT "mtdparts=nand0:0xC0000@0x140000(NPT),-(UBI)" /* must be different from real partition to test NAND partition function */ #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "" #define CONFIG_CMD_NAND #define CONFIG_CMD_CIS #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_NAND_MAX_CHIPS 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0 /* not actually used */ #endif #endif #ifdef CONFIG_MS_SPINAND #if defined(CONFIG_MS_SAVE_ENV_IN_NAND_FLASH) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET CONFIG_MSTAR_ENV_NAND_OFFSET #define CONFIG_MSTAR_ENV_NAND_OFFSET ms_nand_env_offset /*#define CONFIG_MSTAR_ENV_NAND_OFFSET 0x440000*/ #define CONFIG_ENV_SIZE 0x00020000 #endif #define CONFIG_CMD_SPINAND_CIS #define CONFIG_CMD_UBI /* #define CONFIG_CMD_UBIFS */ #define CONFIG_UBI_MWRITE #define MTDIDS_DEFAULT "nand0=nand0" /* "nor0=physmap-flash.0,nand0=nand" */ /* must be different from real partition to test NAND partition function */ #define MTDPARTS_DEFAULT "mtdparts=nand0:0xC0000@0x140000(NPT),-(UBI)" /* #define MTDPARTS_DEFAULT "mtdparts=nand0:0x60000@0x140000(IPL0),0x60000(IPL1),0x60000(IPL_CUST0),0x60000(IPL_CUST1),0xC0000(UBOOT0),0xC0000(UBOOT1),0x60000(ENV),0x340000(KERNEL),0x340000(RECOVERY),-(UBI)"*/ #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "" #define CONFIG_CMD_NAND #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_NAND_MAX_CHIPS 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0 /* not actually used */ #endif /*CONFIG_CMD_NAND*/ #endif /*CONFIG_MS_SPINAND*/ #ifdef CONFIG_MS_EMMC #define CONFIG_ENV_IS_IN_MMC 1 #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_MS_EMMC_DEV_INDEX 1 #define CONFIG_EMMC_PARTITION #define CONFIG_UNLZO_DST_ADDR 0x24000000 #endif #if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_MMC) || defined(CONFIG_ENV_IS_IN_SPI_FLASH) #define CONFIG_CMD_SAVEENV /* saveenv */ #else #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x00020000 /* Total Size of Environment Sector */ #define CONFIG_ENV_RANGE 0x00060000 #endif #if defined(CONFIG_MS_NAND) || defined(CONFIG_MS_MTD_ISP_FLASH) || defined(CONFIG_MS_SPINAND) #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS /*#define CONFIG_MTD_DEBUG #define CONFIG_MTD_DEBUG_VERBOSE 7*/ #endif /* CMD */ #define CONFIG_CMD_CACHE #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_AUTOSCRIPT /* * USB configuration */ #ifdef CONFIG_MS_USB #define CONFIG_USB #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #ifdef CONFIG_MS_ENABLE_USB_LAN_MODULE #define ENABLE_USB_LAN_MODULE #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_BOOTP_GATEWAY #endif #endif #endif /* __CONFIG_H */ /*following config should be considered to be removed after confirmed*/ /* #define CONFIG_SKIP_RELOCATE_UBOOT dropped after uboot 201012 */ /* #undef CONFIG_USE_IRQ // we don't need IRQ/FIQ stuff */ /*#define KERNEL_IMAGE_SIZE 0x1000000 // 10M kernel image size */ /* move to cedric_defconfig * * #define CONFIG_MS_SDMMC 1 * #define CONFIG_MS_EMMC 1 * #define CONFIG_MS_NAND 1 * */ /* Ethernet configuration */ #ifdef CONFIG_MS_EMAC #define CONFIG_MINIUBOOT #define CONFIG_BOOTP_GATEWAY #define CONFIG_TFTP_PORT #endif #define XZ_DICT_ADDR 0x21000000 /*used for XZ decompress*/ #define XZ_DICT_LENGTH 0x01000000 /* I2C configuration */ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_MSTAR #define I2C_MS_DECLARATIONS2 #define CONFIG_SYS_I2C_MS_SPEED (300000) #define CONFIG_SYS_I2C_MS_SLAVE (0x7F) /* EEPROM */ #define CONFIG_CMD_EEPROM #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN (2) #define CONFIG_SYS_I2C_EEPROM_ADDR (0x54) /* SENSOR */ #define CONFIG_MS_SRCFG