4196e58420
New drivers: - MZ-1500 persona driver with MZ-700/MZ-1500 mode switch, PCG bank switching, PSG stubs, physical I/O forwarding for virtual mode - MZ-2200 persona driver (based on MZ-2000) - MZ-1R23/MZ-1R24 Kanji ROM / Dictionary ROM board (B8h/B9h IDM) - MZ-1R37 640KB EMM (ACh/ADh, no auto-increment, 20-bit addressing) - PIO-3034 320KB EMM (configurable base, 19-bit, auto-increment) - Celestite LAN/Memory composite board: - W5100 TCP/IP via ESP32 WiFi (connect, send, recv, ping) - Integrated MZ-1R12 32/64KB CMOS RAM with SD persistence - Integrated MZ-1R37 640KB EMM with SD persistence - UFM flash, unlock state machine, interrupt controller Celestite networking (Phase 2): - New IPC commands: NET_CFG, NET_SOCK, NET_SEND, NET_RECV, NET_PING - ESP32 BSD socket handlers with non-blocking connect and recv - Shared volatile struct for cross-core results (bypasses responseQueue) - Inline IDM read check for socket status and recv data - Z80 test programs: celestite_test.asm (17 tests), celestite_stress.asm (loop) MZ-1500 virtual mode fixes: - I/O writes forwarded to physical hardware (PSG, bank switching, PCG) - E000-E7FF always stays physical during bank switching - PCG bank (F000-FFFF) properly remapped to PHYSICAL when open QDF format support: - Japanese standard QD format auto-detected on load (81936 bytes) - Hunt pattern changed to 00+16 (mark+sync) for inter-block gap handling - Sync stripping handles long preambles (9+ bytes) - MZQDTool updated with -j flag and format conversion Other: - Debug shell load command: len parameter now optional - FSPI filename field: memcpy instead of strncpy for binary data - Interface availability expanded across MZ-700/1500/80A/2000/2200 - Web GUI: param hints for Celestite, updated driver interface lists Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2 lines
6 B
Plaintext
Vendored
2 lines
6 B
Plaintext
Vendored
2.518
|