From d1ff3f815fc639ef591fc3761896afd7fc890572 Mon Sep 17 00:00:00 2001 From: Kees Schoenmakers Date: Sun, 29 Sep 2019 14:41:54 +0200 Subject: [PATCH] Create README.md first entry --- Hardware/README.md | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 Hardware/README.md diff --git a/Hardware/README.md b/Hardware/README.md new file mode 100644 index 0000000..79b392d --- /dev/null +++ b/Hardware/README.md @@ -0,0 +1,13 @@ +This is the programming hardware as I use it now. It has a base board with a LPT connector. It needs to be used +with a LPT on the motherboard or with a USB<->LPT dongle BUT A SPECIAL ONE!. You need one with a Lucent compatible chip. +There exits a few chip versions that are suitable. + +I tried to minimize the chance that hazardous voltages could leave the board into the LPT port, probably +you blow up local components first in case of incident. + +The base board has connectors to hold a programming board. The programming board holds the ZIF socket and signal LED's. + +There exist one programming board for 20 pin ZIF's and one for 24 pin ZIF's. + +'perlblast_nh' will run smootly with this hardware. +