45122533e0
1) Fix build issue in mbedtls 2) skip the public headers check in IDF 3)Update Kconfig Macros 4)Remove deprecated config options 5) Update the sha API according to new nomenclature 6) Update mbedtls_rsa_init usage 7) Include mbedtls/build_info.h instead of mbedtls/config.h 8) Dont include check_config.h 9) Add additional error message in esp_blufi_api.h
| Supported Targets | ESP32 | ESP32-C3 |
|---|
ESP-IDF Blufi Example
This demo shows how to use the Blufi to configurate the Wi-Fi connection to AP.
The BluFi for ESP32 is a Wi-Fi network configuration function via Bluetooth channel. It provides a secure protocol to pass Wi-Fi configuration and credentials to the ESP32.
How to Use Example
Before project configuration and build, be sure to set the correct chip target using:
idf.py set-target <chip_name>
To test this demo, you need to prepare a mobile phone with blufi application installed. You can download the blufi application from Android version and iOS version.
Blufi is completely open source, here is the download link:
- Blufi source code
- BluFi protocol
- iOS source code
- Android source code
- Bluetooth Network User Guide CN
Hardware Required
- A development board with ESP32/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
- A USB cable for Power supply and programming
See Development Boards for more information about it.
Build and Flash
Run idf.py -p PORT flash monitor to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
Example Output
I (0) cpu_start: Starting scheduler on APP CPU.
I (708) wifi:wifi driver task: 3ffbb118, prio:23, stack:6656, core=0
I (708) system_api: Base MAC address is not set
I (708) system_api: read default base MAC address from EFUSE
I (718) wifi:wifi firmware version: 44799ff
I (718) wifi:wifi certification version: v7.0
I (718) wifi:config NVS flash: enabled
I (718) wifi:config nano formating: disabled
I (728) wifi:Init data frame dynamic rx buffer num: 32
I (728) wifi:Init management frame dynamic rx buffer num: 32
I (738) wifi:Init management short buffer num: 32
I (738) wifi:Init dynamic tx buffer num: 32
I (748) wifi:Init static rx buffer size: 1600
I (748) wifi:Init static rx buffer num: 10
I (748) wifi:Init dynamic rx buffer num: 32
I (758) wifi_init: rx ba win: 6
I (758) wifi_init: tcpip mbox: 32
I (768) wifi_init: udp mbox: 6
I (768) wifi_init: tcp mbox: 6
I (768) wifi_init: tcp tx win: 5744
I (778) wifi_init: tcp rx win: 5744
I (778) wifi_init: tcp mss: 1440
I (788) wifi_init: WiFi IRAM OP enabled
I (788) wifi_init: WiFi RX IRAM OP enabled
I (798) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
I (908) wifi:mode : sta (fc:f5:c4:3c:62:90)
I (908) wifi:enable tsf
I (908) BTDM_INIT: BT controller compile version [1342a48]
I (1198) BLUFI_EXAMPLE: BD ADDR: fc:f5:c4:3c:62:92
I (1198) BLUFI_EXAMPLE: BLUFI VERSION 0102
I (1198) BLUFI_EXAMPLE: BLUFI init finish
Troubleshooting
<<<<<<< HEAD:examples/bluetooth/blufi/README.md
- Bluetooth Network User Guide CN ======= For any technical queries, please open an issue on GitHub. We will get back to you soon.
c552024ca7 (Changes on README files on ANCS, Eddystone, HID and NimBLE):examples/bluetooth/bluedroid/ble/blufi/README.md