Merge branch 'feature/ksz80xx_support_extension' into 'master'

esp_eth: rework KSZ80xx implementation and add more KSZ80xx PHYs

Closes IDFGH-6203 and IDF-3522

See merge request espressif/esp-idf!16024

examples/common_components/protocol_examples_common/Kconfig.projbuild

@@ -191,6 +191,15 @@ menu "Example Connection Configuration"
                     help
                         DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
                         Goto http://www.ti.com/product/DP83848J for more information about it.
+
+                config EXAMPLE_ETH_PHY_KSZ80XX
+                    bool "KSZ80xx"
+                    help
+                        With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
+                        Ethernet Physical Layer Tranceivers (PHY).
+                        The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
+                            KSZ8051, KSZ8061, KSZ8081, KSZ8091
+                        Goto https://www.microchip.com for more information about them.
             endchoice
 
             config EXAMPLE_ETH_MDC_GPIO

examples/common_components/protocol_examples_common/connect.c

@@ -390,6 +390,8 @@ static esp_netif_t *eth_start(void)
     s_phy = esp_eth_phy_new_lan87xx(&phy_config);
 #elif CONFIG_EXAMPLE_ETH_PHY_DP83848
     s_phy = esp_eth_phy_new_dp83848(&phy_config);
+#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
+    s_phy = esp_eth_phy_new_ksz80xx(&phy_config);
 #endif
 #elif CONFIG_EXAMPLE_USE_SPI_ETHERNET
     gpio_install_isr_service(0);

examples/ethernet/basic/main/Kconfig.projbuild

@@ -56,17 +56,14 @@ menu "Example Configuration"
                     DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
                     Goto http://www.ti.com/product/DP83848J for more information about it.
 
-            config EXAMPLE_ETH_PHY_KSZ8041
-                bool "KSZ8041"
+            config EXAMPLE_ETH_PHY_KSZ80XX
+                bool "KSZ80xx"
                 help
-                    The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
-
-            config EXAMPLE_ETH_PHY_KSZ8081
-                bool "KSZ8081"
-                help
-                    The KSZ8081 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8081 for more information about it.
+                    With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
+                    Ethernet Physical Layer Tranceivers (PHY).
+                    The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
+                        KSZ8051, KSZ8061, KSZ8081, KSZ8091
+                    Goto https://www.microchip.com for more information about them.
         endchoice # EXAMPLE_ETH_PHY_MODEL
 
         config EXAMPLE_ETH_MDC_GPIO

examples/ethernet/basic/main/ethernet_example_main.c

@@ -112,10 +112,8 @@ void app_main(void)
     esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
 #elif CONFIG_EXAMPLE_ETH_PHY_DP83848
     esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8081
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8081(&phy_config);
+#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
+    esp_eth_phy_t *phy = esp_eth_phy_new_ksz80xx(&phy_config);
 #endif
     esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
     esp_eth_handle_t eth_handle = NULL;

examples/ethernet/eth2ap/main/Kconfig.projbuild

@@ -91,17 +91,14 @@ menu "Example Configuration"
                     DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
                     Goto http://www.ti.com/product/DP83848J for more information about it.
 
-            config EXAMPLE_ETH_PHY_KSZ8041
-                bool "KSZ8041"
+            config EXAMPLE_ETH_PHY_KSZ80XX
+                bool "KSZ80xx"
                 help
-                    The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
-
-            config EXAMPLE_ETH_PHY_KSZ8081
-                bool "KSZ8081"
-                help
-                    The KSZ8081 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8081 for more information about it.
+                    With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
+                    Ethernet Physical Layer Tranceivers (PHY).
+                    The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
+                        KSZ8051, KSZ8061, KSZ8081, KSZ8091
+                    Goto https://www.microchip.com for more information about them.
         endchoice # EXAMPLE_ETH_PHY_MODEL
 
         config EXAMPLE_ETH_MDC_GPIO

examples/ethernet/eth2ap/main/ethernet_example_main.c

@@ -169,10 +169,8 @@ static void initialize_ethernet(void)
     esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
 #elif CONFIG_EXAMPLE_ETH_PHY_DP83848
     esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8081
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8081(&phy_config);
+#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
+    esp_eth_phy_t *phy = esp_eth_phy_new_ksz80xx(&phy_config);
 #endif
 #elif CONFIG_ETH_USE_SPI_ETHERNET
     gpio_install_isr_service(0);

examples/ethernet/iperf/main/Kconfig.projbuild

@@ -107,17 +107,14 @@ menu "Example Configuration"
                     DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
                     Goto http://www.ti.com/product/DP83848J for more information about it.
 
-            config EXAMPLE_ETH_PHY_KSZ8041
-                bool "KSZ8041"
+            config EXAMPLE_ETH_PHY_KSZ80XX
+                bool "KSZ80xx"
                 help
-                    The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
-
-            config EXAMPLE_ETH_PHY_KSZ8081
-                bool "KSZ8081"
-                help
-                    The KSZ8081 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8081 for more information about it.
+                    With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
+                    Ethernet Physical Layer Tranceivers (PHY).
+                    The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
+                        KSZ8051, KSZ8061, KSZ8081, KSZ8091
+                    Goto https://www.microchip.com for more information about them.
         endchoice # EXAMPLE_ETH_PHY_MODEL
 
         config EXAMPLE_ETH_MDC_GPIO

examples/ethernet/iperf/main/cmd_ethernet.c

@@ -219,10 +219,8 @@ void register_ethernet(void)
     esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
 #elif CONFIG_EXAMPLE_ETH_PHY_DP83848
     esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
-#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8081
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8081(&phy_config);
+#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
+    esp_eth_phy_t *phy = esp_eth_phy_new_ksz80xx(&phy_config);
 #endif
 #elif CONFIG_ETH_USE_SPI_ETHERNET
     gpio_install_isr_service(0);

examples/network/simple_sniffer/main/Kconfig.projbuild

@@ -180,17 +180,14 @@ menu "Example Configuration"
                     DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
                     Goto http://www.ti.com/product/DP83848J for more information about it.
 
-            config SNIFFER_ETH_PHY_KSZ8041
-                bool "KSZ8041"
+            config SNIFFER_ETH_PHY_KSZ80XX
+                bool "KSZ80xx"
                 help
-                    The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
-
-            config SNIFFER_ETH_PHY_KSZ8081
-                bool "KSZ8081"
-                help
-                    The KSZ8081 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8081 for more information about it.
+                    With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
+                    Ethernet Physical Layer Tranceivers (PHY).
+                    The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
+                        KSZ8051, KSZ8061, KSZ8081, KSZ8091
+                    Goto https://www.microchip.com for more information about them.
         endchoice # SNIFFER_ETH_PHY_MODEL
 
         config SNIFFER_ETH_MDC_GPIO

examples/network/simple_sniffer/main/simple_sniffer_example_main.c

@@ -146,10 +146,8 @@ static void initialize_eth(void)
     esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
 #elif CONFIG_SNIFFER_ETH_PHY_DP83848
     esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
-#elif CONFIG_SNIFFER_ETH_PHY_KSZ8041
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
-#elif CONFIG_SNIFFER_ETH_PHY_KSZ8081
-    esp_eth_phy_t *phy = esp_eth_phy_new_ksz8081(&phy_config);
+#elif CONFIG_SNIFFER_ETH_PHY_KSZ80XX
+    esp_eth_phy_t *phy = esp_eth_phy_new_ksz80xx(&phy_config);
 #endif
 #elif CONFIG_ETH_USE_SPI_ETHERNET
     gpio_install_isr_service(0);