564 lines
41 KiB
NASM
564 lines
41 KiB
NASM
;--------------------------------------------------------------------------------------------------------
|
|
;-
|
|
;- Name: RFS_Definitions.asm
|
|
;- Created: September 2019
|
|
;- Author(s): Philip Smart
|
|
;- Description: Sharp MZ series Rom Filing System.
|
|
;- Definitions for the RFS including SA1510 locations.
|
|
;-
|
|
;- Credits:
|
|
;- Copyright: (c) 2019-23 Philip Smart <philip.smart@net2net.org>
|
|
;-
|
|
;- History: Sep 2019 - Initial version.
|
|
;- May 2020 - Advent of the new RFS PCB v2.0, quite a few changes to accommodate the
|
|
;- additional and different hardware. The SPI is now onboard the PCB and
|
|
;- not using the printer interface card.
|
|
;- July 2020 - Updated for the tranZPUter v2.1 hardware. RFS can run with a tranZPUter
|
|
;- board with or without the K64 I/O processor. RFS wont use the K64
|
|
;- processor all operations are done by the Z80 under RFS.
|
|
;- March 2021- Updates to accommodate the RFS v2.1 board along with back porting TZFS
|
|
;- developments.
|
|
;-
|
|
;--------------------------------------------------------------------------------------------------------
|
|
;- This source file is free software: you can redistribute it and-or modify
|
|
;- it under the terms of the GNU General Public License as published
|
|
;- by the Free Software Foundation, either version 3 of the License, or
|
|
;- (at your option) any later version.
|
|
;-
|
|
;- This source file is distributed in the hope that it will be useful,
|
|
;- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
;- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
;- GNU General Public License for more details.
|
|
;-
|
|
;- You should have received a copy of the GNU General Public License
|
|
;- along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
;--------------------------------------------------------------------------------------------------------
|
|
|
|
;-----------------------------------------------
|
|
; Features.
|
|
;-----------------------------------------------
|
|
HW_SPI_ENA EQU 1 ; Set to 1 if hardware SPI is present on the RFS PCB v2 board.
|
|
SW_SPI_ENA EQU 0 ; Set to 1 if software SPI is present on the RFS PCB v2 board.
|
|
PP_SPI_ENA EQU 0 ; Set to 1 if using the SPI interface via the Parallel Port, ie. for RFS PCB v1 which doesnt have SPI onboard.
|
|
FUSIONX_ENA EQU 1 ; Set to 1 if using RFS on the tranZPUter FusionX board.
|
|
|
|
; Debugging
|
|
ENADEBUG EQU 0 ; Enable debugging logic, 1 = enable, 0 = disable
|
|
|
|
;-----------------------------------------------
|
|
; Entry/compilation start points.
|
|
;-----------------------------------------------
|
|
UROMADDR EQU 0E800H ; Start of User ROM Address space.
|
|
UROMBSTBL EQU UROMADDR + 020H ; Entry point to the bank switching table.
|
|
RFSJMPTABLE EQU UROMADDR + 00080H ; Start of jump table.
|
|
FDCROMADDR EQU 0F000H
|
|
|
|
|
|
;-----------------------------------------------
|
|
; Common character definitions.
|
|
;-----------------------------------------------
|
|
SCROLL EQU 001H ;Set scroll direction UP.
|
|
BELL EQU 007H
|
|
SPACE EQU 020H
|
|
TAB EQU 009H ;TAB ACROSS (8 SPACES FOR SD-BOARD)
|
|
CR EQU 00DH
|
|
LF EQU 00AH
|
|
FF EQU 00CH
|
|
CS EQU 0CH ; Clear screen
|
|
DELETE EQU 07FH
|
|
BACKS EQU 008H
|
|
SOH EQU 1 ; For XModem etc.
|
|
EOT EQU 4
|
|
ACK EQU 6
|
|
NAK EQU 015H
|
|
NUL EQU 000H
|
|
NULL EQU 000H
|
|
CTRL_A EQU 001H
|
|
CTRL_B EQU 002H
|
|
CTRL_C EQU 003H
|
|
CTRL_D EQU 004H
|
|
CTRL_E EQU 005H
|
|
CTRL_F EQU 006H
|
|
CTRL_G EQU 007H
|
|
CTRL_H EQU 008H
|
|
CTRL_I EQU 009H
|
|
CTRL_J EQU 00AH
|
|
CTRL_K EQU 00BH
|
|
CTRL_L EQU 00CH
|
|
CTRL_M EQU 00DH
|
|
CTRL_N EQU 00EH
|
|
CTRL_O EQU 00FH
|
|
CTRL_P EQU 010H
|
|
CTRL_Q EQU 011H
|
|
CTRL_R EQU 012H
|
|
CTRL_S EQU 013H
|
|
CTRL_T EQU 014H
|
|
CTRL_U EQU 015H
|
|
CTRL_V EQU 016H
|
|
CTRL_W EQU 017H
|
|
CTRL_X EQU 018H
|
|
CTRL_Y EQU 019H
|
|
CTRL_Z EQU 01AH
|
|
ESC EQU 01BH
|
|
CTRL_SLASH EQU 01CH
|
|
CTRL_LB EQU 01BH
|
|
CTRL_RB EQU 01DH
|
|
CTRL_CAPPA EQU 01EH
|
|
CTRL_UNDSCR EQU 01FH
|
|
CTRL_AT EQU 000H
|
|
NOKEY EQU 0F0H
|
|
CURSRIGHT EQU 0F1H
|
|
CURSLEFT EQU 0F2H
|
|
CURSUP EQU 0F3H
|
|
CURSDOWN EQU 0F4H
|
|
DBLZERO EQU 0F5H
|
|
INSERT EQU 0F6H
|
|
CLRKEY EQU 0F7H
|
|
HOMEKEY EQU 0F8H
|
|
BREAKKEY EQU 0FBH
|
|
GRAPHKEY EQU 0FCH
|
|
ALPHAKEY EQU 0FDH
|
|
|
|
|
|
;-------------------------------------------------------
|
|
; Function entry points in the standard SA-1510 Monitor.
|
|
;-------------------------------------------------------
|
|
GETL: EQU 00003h
|
|
LETNL: EQU 00006h
|
|
NL: EQU 00009h
|
|
PRNTS: EQU 0000Ch
|
|
PRNT: EQU 00012h
|
|
MSG: EQU 00015h
|
|
MSGX: EQU 00018h
|
|
GETKY EQU 0001Bh
|
|
BRKEY EQU 0001Eh
|
|
?WRI EQU 00021h
|
|
?WRD EQU 00024h
|
|
?RDI EQU 00027h
|
|
?RDD EQU 0002Ah
|
|
?VRFY EQU 0002Dh
|
|
MELDY EQU 00030h
|
|
?TMST EQU 00033h
|
|
MONIT: EQU 00000h
|
|
SS: EQU 00089h
|
|
ST1: EQU 00095h
|
|
HLHEX EQU 00410h
|
|
_2HEX EQU 0041Fh
|
|
?MODE: EQU 0074DH
|
|
?KEY EQU 008CAh
|
|
PRNT3 EQU 0096Ch
|
|
?ADCN EQU 00BB9h
|
|
?DACN EQU 00BCEh
|
|
?DSP: EQU 00DB5H
|
|
?BLNK EQU 00DA6h
|
|
?DPCT EQU 00DDCh
|
|
PRTHL: EQU 003BAh
|
|
PRTHX: EQU 003C3h
|
|
HEX: EQU 003F9h
|
|
DPCT: EQU 00DDCh
|
|
DLY12: EQU 00DA7h
|
|
DLY12A: EQU 00DAAh
|
|
?RSTR1: EQU 00EE6h
|
|
MOTOR: EQU 006A3H
|
|
CKSUM: EQU 0071AH
|
|
GAP: EQU 0077AH
|
|
WTAPE: EQU 00485H
|
|
MSTOP: EQU 00700H
|
|
|
|
;-----------------------------------------------
|
|
; Memory mapped ports in hardware.
|
|
;-----------------------------------------------
|
|
SCRN: EQU 0D000H
|
|
ARAM: EQU 0D800H
|
|
DSPCTL: EQU 0DFFFH ; Screen 40/80 select register (bit 7)
|
|
KEYPA: EQU 0E000h
|
|
KEYPB: EQU 0E001h
|
|
KEYPC: EQU 0E002h
|
|
KEYPF: EQU 0E003h
|
|
CSTR: EQU 0E002h
|
|
CSTPT: EQU 0E003h
|
|
CONT0: EQU 0E004h
|
|
CONT1: EQU 0E005h
|
|
CONT2: EQU 0E006h
|
|
CONTF: EQU 0E007h
|
|
SUNDG: EQU 0E008h
|
|
TEMP: EQU 0E008h
|
|
MEMSW: EQU 0E00CH
|
|
MEMSWR: EQU 0E010H
|
|
INVDSP: EQU 0E014H
|
|
NRMDSP: EQU 0E015H
|
|
SCLDSP: EQU 0E200H
|
|
SCLBASE: EQU 0E2H
|
|
BNKCTRLRST: EQU 0EFF8H ; Bank control reset, returns all registers to power up default.
|
|
BNKCTRLDIS: EQU 0EFF9H ; Disable bank control registers by resetting the coded latch.
|
|
HWSPIDATA: EQU 0EFFBH ; Hardware SPI Data register (read/write).
|
|
HWSPISTART: EQU 0EFFCH ; Start an SPI transfer.
|
|
BNKSELMROM: EQU 0EFFDh ; Select RFS Bank1 (MROM)
|
|
BNKSELUSER: EQU 0EFFEh ; Select RFS Bank2 (User ROM)
|
|
BNKCTRL: EQU 0EFFFH ; Bank Control register (read/write).
|
|
|
|
;
|
|
; RFS v2 Control Register constants.
|
|
;
|
|
BBCLK EQU 1 ; BitBang SPI Clock.
|
|
SDCS EQU 2 ; SD Card Chip Select, active low.
|
|
BBMOSI EQU 4 ; BitBang MOSI (Master Out Serial In).
|
|
CDLTCH1 EQU 8 ; Coded latch up count bit 1
|
|
CDLTCH2 EQU 16 ; Coded latch up count bit 2
|
|
CDLTCH3 EQU 32 ; Coded latch up count bit 3
|
|
BK2A19 EQU 64 ; User ROM Device Select Bit 0 (or Address bit 19).
|
|
BK2A20 EQU 128 ; User ROM Device Select Bit 1 (or Address bit 20).
|
|
; BK2A20 : BK2A19
|
|
; 0 0 = Flash RAM 0 (default).
|
|
; 0 1 = Flash RAM 1.
|
|
; 1 0 = Flasm RAM 2 or Static RAM 0.
|
|
; 1 1 = Reserved.`
|
|
|
|
BNKCTRLDEF EQU BBMOSI+SDCS+BBCLK ; Default on startup for the Bank Control register.
|
|
|
|
;-----------------------------------------------
|
|
; IO ports in hardware and values.
|
|
;-----------------------------------------------
|
|
SPI_OUT EQU 0FFH
|
|
SPI_IN EQU 0FEH
|
|
;
|
|
DOUT_LOW EQU 000H
|
|
DOUT_HIGH EQU 004H
|
|
DOUT_MASK EQU 004H
|
|
DIN_LOW EQU 000H
|
|
DIN_HIGH EQU 001H
|
|
CLOCK_LOW EQU 000H
|
|
CLOCK_HIGH EQU 002H
|
|
CLOCK_MASK EQU 0FDH
|
|
CS_LOW EQU 000H
|
|
CS_HIGH EQU 001H
|
|
;
|
|
MMCFG EQU 060H ; Memory management configuration latch.
|
|
SETXMHZ EQU 062H ; Select the alternate clock frequency.
|
|
SET2MHZ EQU 064H ; Select the system 2MHz clock frequency.
|
|
CLKSELRD EQU 066H ; Read clock selected setting, 0 = 2MHz, 1 = XMHz
|
|
SVCREQ EQU 068H ; I/O Processor service request.
|
|
CPUCFG EQU 06CH ; Version 2.2 CPU configuration register.
|
|
CPUSTATUS EQU 06CH ; Version 2.2 CPU runtime status register.
|
|
CPUINFO EQU 06DH ; Version 2.2 CPU information register.
|
|
CPLDCFG EQU 06EH ; Version 2.1 CPLD configuration register.
|
|
CPLDSTATUS EQU 06EH ; Version 2.1 CPLD status register.
|
|
CPLDINFO EQU 06FH ; Version 2.1 CPLD version information register.
|
|
MMIO0 EQU 0E0H ; MZ-700/MZ-800 Memory Management Set 0
|
|
MMIO1 EQU 0E1H ; MZ-700/MZ-800 Memory Management Set 1
|
|
MMIO2 EQU 0E2H ; MZ-700/MZ-800 Memory Management Set 2
|
|
MMIO3 EQU 0E3H ; MZ-700/MZ-800 Memory Management Set 3
|
|
MMIO4 EQU 0E4H ; MZ-700/MZ-800 Memory Management Set 4
|
|
MMIO5 EQU 0E5H ; MZ-700/MZ-800 Memory Management Set 5
|
|
MMIO6 EQU 0E6H ; MZ-700/MZ-800 Memory Management Set 6
|
|
MMIO7 EQU 0E7H ; MZ-700/MZ-800 Memory Management Set 7
|
|
|
|
;-----------------------------------------------
|
|
; CPLD Configuration constants.
|
|
;-----------------------------------------------
|
|
MODE_MZ80K EQU 0 ; Set to MZ-80K mode.
|
|
MODE_MZ80C EQU 1 ; Set to MZ-80C mode.
|
|
MODE_MZ1200 EQU 2 ; Set to MZ-1200 mode.
|
|
MODE_MZ80A EQU 3 ; Set to MZ-80A mode (base mode on MZ-80A hardware).
|
|
MODE_MZ700 EQU 4 ; Set to MZ-700 mode (base mode on MZ-700 hardware).
|
|
MODE_MZ800 EQU 5 ; Set to MZ-800 mode.
|
|
MODE_MZ80B EQU 6 ; Set to MZ-80B mode.
|
|
MODE_MZ2000 EQU 7 ; Set to MZ-2000 mode.
|
|
MODE_VIDEO_FPGA EQU 8 ; Bit flag (bit 3) to switch CPLD into using the new FPGA video hardware.
|
|
|
|
;-----------------------------------------------
|
|
; tranZPUter SW Memory Management modes
|
|
;-----------------------------------------------
|
|
TZMM_ENIOWAIT EQU 020H ; Memory management IO Wait State enable - insert a wait state when an IO operation to E0-FF is executed.
|
|
TZMM_ORIG EQU 000H ; Original Sharp MZ80A mode, no tranZPUter features are selected except the I/O control registers (default: 0x60-063).
|
|
TZMM_BOOT EQU 001H ; Original mode but E800-EFFF is mapped to tranZPUter RAM so TZFS can be booted.
|
|
TZMM_TZFS EQU 002H + TZMM_ENIOWAIT ; TZFS main memory configuration. all memory is in tranZPUter RAM, E800-FFFF is used by TZFS, SA1510 is at 0000-1000 and RAM is 1000-CFFF, 64K Block 0 selected.
|
|
TZMM_TZFS2 EQU 003H + TZMM_ENIOWAIT ; TZFS main memory configuration. all memory is in tranZPUter RAM, E800-EFFF is used by TZFS, SA1510 is at 0000-1000 and RAM is 1000-CFFF, 64K Block 0 selected, F000-FFFF is in 64K Block 1.
|
|
TZMM_TZFS3 EQU 004H + TZMM_ENIOWAIT ; TZFS main memory configuration. all memory is in tranZPUter RAM, E800-EFFF is used by TZFS, SA1510 is at 0000-1000 and RAM is 1000-CFFF, 64K Block 0 selected, F000-FFFF is in 64K Block 2.
|
|
TZMM_TZFS4 EQU 005H + TZMM_ENIOWAIT ; TZFS main memory configuration. all memory is in tranZPUter RAM, E800-EFFF is used by TZFS, SA1510 is at 0000-1000 and RAM is 1000-CFFF, 64K Block 0 selected, F000-FFFF is in 64K Block 3.
|
|
TZMM_CPM EQU 006H + TZMM_ENIOWAIT ; CPM main memory configuration, all memory on the tranZPUter board, 64K block 4 selected. Special case for F3C0:F3FF & F7C0:F7FF (floppy disk paging vectors) which resides on the mainboard.
|
|
TZMM_CPM2 EQU 007H + TZMM_ENIOWAIT ; CPM main memory configuration, F000-FFFF are on the tranZPUter board in block 4, 0040-CFFF and E800-EFFF are in block 5, mainboard for D000-DFFF (video), E000-E800 (Memory control) selected.
|
|
; Special case for 0000:003F (interrupt vectors) which resides in block 4, F3C0:F3FF & F7C0:F7FF (floppy disk paging vectors) which resides on the mainboard.
|
|
TZMM_COMPAT EQU 008H + TZMM_ENIOWAIT ; Original mode but with main DRAM in Bank 0 to allow bootstrapping of programs from other machines such as the MZ700.
|
|
TZMM_HOSTACCESS EQU 009H + TZMM_ENIOWAIT ; Mode to allow code running in Bank 0, address E800:FFFF to access host memory. Monitor ROM 0000-0FFF and Main DRAM 0x1000-0xD000, video and memory mapped I/O are on the host machine, User/Floppy ROM E800-FFFF are in tranZPUter memory.
|
|
TZMM_MZ700_0 EQU 00AH + TZMM_ENIOWAIT ; MZ700 Mode - 0000:0FFF is on the tranZPUter board in block 6, 1000:CFFF is on the tranZPUter board in block 0, D000:FFFF is on the mainboard.
|
|
TZMM_MZ700_1 EQU 00BH + TZMM_ENIOWAIT ; MZ700 Mode - 0000:0FFF is on the tranZPUter board in block 0, 1000:CFFF is on the tranZPUter board in block 0, D000:FFFF is on the tranZPUter in block 6.
|
|
TZMM_MZ700_2 EQU 00CH + TZMM_ENIOWAIT ; MZ700 Mode - 0000:0FFF is on the tranZPUter board in block 6, 1000:CFFF is on the tranZPUter board in block 0, D000:FFFF is on the tranZPUter in block 6.
|
|
TZMM_MZ700_3 EQU 00DH + TZMM_ENIOWAIT ; MZ700 Mode - 0000:0FFF is on the tranZPUter board in block 0, 1000:CFFF is on the tranZPUter board in block 0, D000:FFFF is inaccessible.
|
|
TZMM_MZ700_4 EQU 00EH + TZMM_ENIOWAIT ; MZ700 Mode - 0000:0FFF is on the tranZPUter board in block 6, 1000:CFFF is on the tranZPUter board in block 0, D000:FFFF is inaccessible.
|
|
TZMM_MZ800 EQU 00FH + TZMM_ENIOWAIT ; MZ800 Mode - Tracks original hardware mode offering MZ700/MZ800 configurations.
|
|
TZMM_FPGA EQU 015H + TZMM_ENIOWAIT ; Open up access for the K64F to the FPGA resources such as memory. All other access to RAM or mainboard is blocked.
|
|
TZMM_TZPUM EQU 016H + TZMM_ENIOWAIT ; Everything in on mainboard, no access to tranZPUter memory.
|
|
TZMM_TZPU EQU 017H + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 0 is selected.
|
|
TZMM_TZPU0 EQU 018H + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 0 is selected.
|
|
TZMM_TZPU1 EQU 019H + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 1 is selected.
|
|
TZMM_TZPU2 EQU 01AH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 2 is selected.
|
|
TZMM_TZPU3 EQU 01BH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 3 is selected.
|
|
TZMM_TZPU4 EQU 01CH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 4 is selected.
|
|
TZMM_TZPU5 EQU 01DH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 5 is selected.
|
|
TZMM_TZPU6 EQU 01EH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 6 is selected.
|
|
TZMM_TZPU7 EQU 01FH + TZMM_ENIOWAIT ; Everything is in tranZPUter domain, no access to underlying Sharp mainboard unless memory management mode is switched. tranZPUter RAM 64K block 7 is selected.
|
|
|
|
;-----------------------------------------------
|
|
; Rom File System Header (MZF)
|
|
;-----------------------------------------------
|
|
RFS_ATRB: EQU 00000h ; Code Type, 01 = Machine Code.
|
|
RFS_NAME: EQU 00001h ; Title/Name (17 bytes).
|
|
RFS_SIZE: EQU 00012h ; Size of program.
|
|
RFS_DTADR: EQU 00014h ; Load address of program.
|
|
RFS_EXADR: EQU 00016h ; Exec address of program.
|
|
RFS_COMNT: EQU 00018h ; COMMENT
|
|
|
|
;-----------------------------------------------
|
|
; Entry/compilation start points.
|
|
;-----------------------------------------------
|
|
TPSTART: EQU 010F0h
|
|
MEMSTART: EQU 01200h
|
|
MSTART: EQU 0E900h
|
|
MZFHDRSZ EQU 128
|
|
RFSSECTSZ EQU 256
|
|
MROMSIZE EQU 4096
|
|
UROMSIZE EQU 2048
|
|
FNSIZE EQU 17
|
|
;
|
|
; Monitor ROM Jump Table definitions.
|
|
;
|
|
MROMJMPTBL: EQU 00070H
|
|
DIRMROM: EQU MROMJMPTBL + 00000H
|
|
MFINDMZF: EQU MROMJMPTBL + 00003H
|
|
MROMLOAD: EQU MROMJMPTBL + 00006H
|
|
|
|
;-----------------------------------------------
|
|
; ROM Banks, 0-7 are reserved for alternative
|
|
; Monitor versions, CPM and RFS
|
|
; code in MROM bank,
|
|
; 0-7 are reserved for RFS code in
|
|
; the User ROM bank.
|
|
; 8-15 are reserved for CPM code in
|
|
; the User ROM bank.
|
|
;-----------------------------------------------
|
|
MROMPAGES EQU 8
|
|
USRROMPAGES EQU 12 ; Monitor ROM : User ROM
|
|
ROMBANK0 EQU 0 ; MROM SA1510 40 Char : RFS Bank 0 - Main RFS Entry point and functions.
|
|
ROMBANK1 EQU 1 ; MROM SA1510 80 Char : RFS Bank 1 - Floppy disk controller and utilities.
|
|
ROMBANK2 EQU 2 ; CPM 2.2 CBIOS : RFS Bank 2 - SD Card controller and utilities.
|
|
ROMBANK3 EQU 3 ; RFS Utilities : RFS Bank 3 - Cmdline tools (Memory, Printer, Help)
|
|
ROMBANK4 EQU 4 ; MZ700 1Z-013A 40C : RFS Bank 4 - CMT Utilities.
|
|
ROMBANK5 EQU 5 ; MZ700-1Z-013A 80C : RFS Bank 5
|
|
ROMBANK6 EQU 6 ; MZ-80B IPL : RFS Bank 6
|
|
ROMBANK7 EQU 7 ; Free : RFS Bank 7 - Memory and timer test utilities.
|
|
ROMBANK8 EQU 8 ; : CBIOS Bank 1 - Utilities
|
|
ROMBANK9 EQU 9 ; : CBIOS Bank 2 - Screen / ANSI Terminal
|
|
ROMBANK10 EQU 10 ; : CBIOS Bank 3 - SD Card
|
|
ROMBANK11 EQU 11 ; : CBIOS Bank 4 - Floppy disk controller.
|
|
|
|
|
|
; MMC/SD command (SPI mode)
|
|
CMD0 EQU 64 + 0 ; GO_IDLE_STATE
|
|
CMD1 EQU 64 + 1 ; SEND_OP_COND
|
|
ACMD41 EQU 0x40+41 ; SEND_OP_COND (SDC)
|
|
CMD8 EQU 64 + 8 ; SEND_IF_COND
|
|
CMD9 EQU 64 + 9 ; SEND_CSD
|
|
CMD10 EQU 64 + 10 ; SEND_CID
|
|
CMD12 EQU 64 + 12 ; STOP_TRANSMISSION
|
|
CMD13 EQU 64 + 13 ; SEND_STATUS
|
|
ACMD13 EQU 0x40+13 ; SD_STATUS (SDC)
|
|
CMD16 EQU 64 + 16 ; SET_BLOCKLEN
|
|
CMD17 EQU 64 + 17 ; READ_SINGLE_BLOCK
|
|
CMD18 EQU 64 + 18 ; READ_MULTIPLE_BLOCK
|
|
CMD23 EQU 64 + 23 ; SET_BLOCK_COUNT
|
|
ACMD23 EQU 0x40+23 ; SET_WR_BLK_ERASE_COUNT (SDC)
|
|
CMD24 EQU 64 + 24 ; WRITE_BLOCK
|
|
CMD25 EQU 64 + 25 ; WRITE_MULTIPLE_BLOCK
|
|
CMD32 EQU 64 + 32 ; ERASE_ER_BLK_START
|
|
CMD33 EQU 64 + 33 ; ERASE_ER_BLK_END
|
|
CMD38 EQU 64 + 38 ; ERASE
|
|
CMD55 EQU 64 + 55 ; APP_CMD
|
|
CMD58 EQU 64 + 58 ; READ_OCR
|
|
SD_SECSIZE EQU 512 ; Default size of an SD Sector
|
|
SD_RETRIES EQU 00100H ; Number of retries before giving up.
|
|
|
|
; Card type flags (CardType)
|
|
CT_MMC EQU 001H ; MMC ver 3
|
|
CT_SD1 EQU 002H ; SD ver 1
|
|
CT_SD2 EQU 004H ; SD ver 2
|
|
CT_SDC EQU CT_SD1|CT_SD2 ; SD
|
|
CT_BLOCK EQU 008H ; Block addressing
|
|
|
|
; SD Card Directory structure. The directory entries are based on the MZF Header format and constraints.
|
|
;
|
|
; FLAG1 | FLAG2 | FILE NAME | START SECTOR | SIZE | LOAD ADDR | EXEC ADDR | RESERVED
|
|
; 1 Byte | 1 Byte | 17 Bytes | 2 Bytes | 2 Bytes | 2 Bytes | 2 Bytes | 5 Bytes
|
|
;
|
|
; FLAG1 : BIT 7 = 1, Valid directory entry, 0 = inactive.
|
|
; FLAG2 : MZF Execution Code, 0x01 = Binary
|
|
; FILENAME : Standard MZF format filename.
|
|
; START SECTOR : Sector in the SD card where the program starts. It always starts at position 0 of the sector.
|
|
; SIZE : Size in bytes of the program. Each file block occupies 64Kbyte space (as per a tape) and this
|
|
; parameter provides the actual space occupied by the program at the current time.
|
|
; LOAD ADDR : Start address in memory where data should be loaded.
|
|
; EXEC ADDR : If a binary then this parameter specifies the location to auto execute once loaded.
|
|
; RESERVED : Not used at the moemnt.
|
|
SDDIR_FLAG1 EQU 000H
|
|
SDDIR_FLAG2 EQU 001H
|
|
SDDIR_FILEN EQU 002H
|
|
SDDIR_SSEC EQU 013H
|
|
SDDIR_SIZE EQU 015H
|
|
SDDIR_LOAD EQU 017H
|
|
SDDIR_EXEC EQU 019H
|
|
SDDIR_FNSZ EQU FNSIZE
|
|
SDDIR_ENTSZ EQU 32
|
|
|
|
;
|
|
; Rom Filing System constants for the SD Card.
|
|
;
|
|
SDDIR_DIRENT EQU 256 ; Directory entries in the RFS directory.
|
|
SDDIR_DIRENTSZ EQU 32 ; Size of a directory entry.
|
|
SDDIR_DIRSIZE EQU SDDIR_DIRENT * SDDIR_DIRENTSZ ; Total size of the directory.
|
|
SDDIR_BLOCKSZ EQU 65536 ; Size of a file block per directory entry.
|
|
SDDIR_IMGSZ EQU SDDIR_DIRSIZE + (SDDIR_DIRENT * SDDIR_BLOCKSZ) ; Total size of the RFS image.
|
|
|
|
OBJCD EQU 001H ; MZF contains a binary object.
|
|
BTX1CD EQU 002H ; MZF contains an MZ-80K/80A BASIC program.
|
|
BTX2CD EQU 005H ; MZF contains an MZ-700/800 BASIC program.
|
|
BTX3CD EQU 07EH ; MZF contains a NASCOM Cassette BASIC program.
|
|
BTX4CD EQU 07FH ; MZF contains a NASCOM ASCII TEXT BASIC program.
|
|
TZOBJCD0 EQU 0F8H ; MZF contains a TZFS binary object for page 0.
|
|
TZOBJCD1 EQU 0F9H
|
|
TZOBJCD2 EQU 0FAH
|
|
TZOBJCD3 EQU 0FBH
|
|
TZOBJCD4 EQU 0FCH
|
|
TZOBJCD5 EQU 0FDH
|
|
TZOBJCD6 EQU 0FEH
|
|
TZOBJCD7 EQU 0FFH ; MZF contains a TZFS binary object for page 7.
|
|
|
|
;-----------------------------------------------
|
|
; SA-1510 MONITOR WORK AREA (MZ80A)
|
|
;-----------------------------------------------
|
|
STACK: EQU 010F0H
|
|
;
|
|
ORG STACK
|
|
;
|
|
SPV:
|
|
IBUFE: ; TAPE BUFFER (128 BYTES)
|
|
ATRB: DS virtual 1 ; ATTRIBUTE
|
|
NAME: DS virtual FNSIZE ; FILE NAME
|
|
SIZE: DS virtual 2 ; BYTESIZE
|
|
DTADR: DS virtual 2 ; DATA ADDRESS
|
|
EXADR: DS virtual 2 ; EXECUTION ADDRESS
|
|
COMNT: DS virtual 92 ; COMMENT
|
|
SWPW: DS virtual 10 ; SWEEP WORK
|
|
KDATW: DS virtual 2 ; KEY WORK
|
|
KANAF: DS virtual 1 ; KANA FLAG (01=GRAPHIC MODE)
|
|
DSPXY: DS virtual 2 ; DISPLAY COORDINATES
|
|
MANG: DS virtual 6 ; COLUMN MANAGEMENT
|
|
MANGE: DS virtual 1 ; COLUMN MANAGEMENT END
|
|
PBIAS: DS virtual 1 ; PAGE BIAS
|
|
ROLTOP: DS virtual 1 ; ROLL TOP BIAS
|
|
MGPNT: DS virtual 1 ; COLUMN MANAG. POINTER
|
|
PAGETP: DS virtual 2 ; PAGE TOP
|
|
ROLEND: DS virtual 1 ; ROLL END
|
|
DS virtual 14 ; BIAS
|
|
FLASH: DS virtual 1 ; FLASHING DATA
|
|
SFTLK: DS virtual 1 ; SHIFT LOCK
|
|
REVFLG: DS virtual 1 ; REVERSE FLAG
|
|
SPAGE: DS virtual 1 ; PAGE CHANGE
|
|
FLSDT: DS virtual 1 ; CURSOR DATA
|
|
STRGF: DS virtual 1 ; STRING FLAG
|
|
DPRNT: DS virtual 1 ; TAB COUNTER
|
|
TMCNT: DS virtual 2 ; TAPE MARK COUNTER
|
|
SUMDT: DS virtual 2 ; CHECK SUM DATA
|
|
CSMDT: DS virtual 2 ; FOR COMPARE SUM DATA
|
|
AMPM: DS virtual 1 ; AMPM DATA
|
|
TIMFG: DS virtual 1 ; TIME FLAG
|
|
SWRK: DS virtual 1 ; KEY SOUND FLAG
|
|
TEMPW: DS virtual 1 ; TEMPO WORK
|
|
ONTYO: DS virtual 1 ; ONTYO WORK
|
|
OCTV: DS virtual 1 ; OCTAVE WORK
|
|
RATIO: DS virtual 2 ; ONPU RATIO
|
|
BUFER: DS virtual 81 ; GET LINE BUFFER
|
|
|
|
; Starting 1000H - Generally unused bytes not cleared by the monitor.
|
|
ROMBK1: EQU 01016H ; CURRENT MROM BANK
|
|
ROMBK2: EQU 01017H ; CURRENT USERROM BANK
|
|
WRKROMBK1: EQU 01018H ; WORKING MROM BANK
|
|
WRKROMBK2: EQU 01019H ; WORKING USERROM BANK
|
|
ROMCTL: EQU 0101AH ; Current Bank control register setting.
|
|
SCRNMODE: EQU 0101BH ; Mode of screen, 0 = 40 char, 1 = 80 char.
|
|
TMPADR: EQU 0101CH ; TEMPORARY ADDRESS STORAGE
|
|
TMPSIZE: EQU 0101EH ; TEMPORARY SIZE
|
|
TMPCNT: EQU 01020H ; TEMPORARY COUNTER
|
|
TMPLINECNT: EQU 01022H ; Temporary counter for displayed lines.
|
|
TMPSTACKP: EQU 01024H ; Temporary stack pointer save.
|
|
SDVER: EQU 01026H
|
|
SDCAP: EQU 01027H
|
|
SDDRIVENO EQU 01028H ; RFS SDCFS Active Drive Number
|
|
CMTFILENO EQU 01029H ; Next Sequential file number to read when file request given without name.
|
|
TZPU: EQU 0102AH ; Tranzputer present flag (0 = not present, > 0 = present and version number).
|
|
; Variables sharing the BUFER buffer, normally the BUFER is only used to get keyboard input and so long as data in BUFER is processed
|
|
; before calling the CMT/SD commands and not inbetween there shouldnt be any issue. Also the space used is at the top end of the buffer which is not used so often.
|
|
; This frees up memory needed by the CMT and SD card.
|
|
SECTORBUF: EQU 0CE00H ; Working buffer to place an SD card sector.
|
|
SDSTARTSEC EQU BUFER+50+0 ; Starting sector of data to read/write from/to SD card.
|
|
SDLOADADDR EQU BUFER+50+4 ; Address to read/write data from/to SD card.
|
|
SDLOADSIZE EQU BUFER+50+6 ; Total remaining byte count data to read/write from/to SD card.
|
|
SDAUTOEXEC EQU BUFER+50+8 ; Flag to indicate if a loaded image should be executed (=0xFF)
|
|
SDBUF: EQU BUFER+50+9 ; SD Card command fram buffer for the command and response storage.
|
|
DIRSECBUF: EQU BUFER+50+20 ; Directory sector in cache.
|
|
DUMPADDR: EQU BUFER+50+22 ; Address used by the D(ump) command so that calls without parameters go onto the next block.
|
|
CMTLOLOAD: EQU BUFER+50+24 ; Flag to indicate that a tape program is loaded into hi memory then shifted to low memory after ROM pageout.
|
|
CMTCOPY: EQU BUFER+50+25 ; Flag to indicate that a CMT copy operation is taking place.
|
|
CMTAUTOEXEC: EQU BUFER+50+26 ; Auto execution flag, run CMT program when loaded if flag clear.
|
|
DTADRSTORE: EQU BUFER+50+27 ; Backup for load address if actual load shifts to lo memory or to 0x1200 for copy.
|
|
SDCOPY: EQU BUFER+50+29 ; Flag to indicate an SD copy is taking place, either CMT->SD or SD->CMT.
|
|
RESULT: EQU BUFER+50+30 ; Result variable needed for interbank calls when a result is needed.
|
|
|
|
; Quickdisk work area
|
|
;QDPA EQU 01130h ; QD code 1
|
|
;QDPB EQU 01131h ; QD code 2
|
|
;QDPC EQU 01132h ; QD header startaddress
|
|
;QDPE EQU 01134h ; QD header length
|
|
;QDCPA EQU 0113Bh ; QD error flag
|
|
;HDPT EQU 0113Ch ; QD new headpoint possition
|
|
;HDPT0 EQU 0113Dh ; QD actual headpoint possition
|
|
;FNUPS EQU 0113Eh
|
|
;FNUPF EQU 01140h
|
|
;FNA EQU 01141h ; File Number A (actual file number)
|
|
;FNB EQU 01142h ; File Number B (next file number)
|
|
;MTF EQU 01143h ; QD motor flag
|
|
;RTYF EQU 01144h
|
|
;SYNCF EQU 01146h ; SyncFlags
|
|
;RETSP EQU 01147h
|
|
;BUFER EQU 011A3h
|
|
;QDIRBF EQU 0CD90h
|
|
|
|
|
|
|
|
;SPV:
|
|
;IBUFE: ; TAPE BUFFER (128 BYTES)
|
|
;ATRB: DS virtual 1 ; Code Type, 01 = Machine Code.
|
|
;NAME: DS virtual 17 ; Title/Name (17 bytes).
|
|
;SIZE: DS virtual 2 ; Size of program.
|
|
;DTADR: DS virtual 2 ; Load address of program.
|
|
;EXADR: DS virtual 2 ; Exec address of program.
|
|
;COMNT: DS virtual 104 ; COMMENT
|
|
;KANAF: DS virtual 1 ; KANA FLAG (01=GRAPHIC MODE)
|
|
;DSPXY: DS virtual 2 ; DISPLAY COORDINATES
|
|
;MANG: DS virtual 27 ; COLUMN MANAGEMENT
|
|
;FLASH: DS virtual 1 ; FLASHING DATA
|
|
;FLPST: DS virtual 2 ; FLASHING POSITION
|
|
;FLSST: DS virtual 1 ; FLASHING STATUS
|
|
;FLSDT: DS virtual 1 ; CURSOR DATA
|
|
;STRGF: DS virtual 1 ; STRING FLAG
|
|
;DPRNT: DS virtual 1 ; TAB COUNTER
|
|
;TMCNT: DS virtual 2 ; TAPE MARK COUNTER
|
|
;SUMDT: DS virtual 2 ; CHECK SUM DATA
|
|
;CSMDT: DS virtual 2 ; FOR COMPARE SUM DATA
|
|
;AMPM: DS virtual 1 ; AMPM DATA
|
|
;TIMFG: DS virtual 1 ; TIME FLAG
|
|
;SWRK: DS virtual 1 ; KEY SOUND FLAG
|
|
;TEMPW: DS virtual 1 ; TEMPO WORK
|
|
;ONTYO: DS virtual 1 ; ONTYO WORK
|
|
;OCTV: DS virtual 1 ; OCTAVE WORK
|
|
;RATIO: DS virtual 2 ; ONPU RATIO
|