ee250685e1
[MiSTer] ; lastcore - Autoboot the last loaded core (corename autosaved in CONFIG/lastcore.dat) first found on the SD/USB ; lastexactcore - Autoboot the last loaded exact core (corename_yyyymmdd.rbf autosaved in CONFIG/lastcore.dat) first found on the SD/USB ; corename - Autoboot first corename_*.rbf found on the SD/USB ; corename_yyyymmdd.rbf - Autoboot first corename_yyyymmdd.rbf found on the SD/USB ;bootcore=lastcore ; uncomment to autoboot a core, as the last loaded core. bootcore_timeout=10 ; 10-30 timeout before autoboot, comment for autoboot without timeout.
69 lines
3.3 KiB
INI
69 lines
3.3 KiB
INI
[MiSTer]
|
|
key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
|
|
forced_scandoubler=0 ; set to 1 to run scandoubler on VGA output always (depends on core).
|
|
ypbpr=0 ; set to 1 for YPbPr on VGA output.
|
|
composite_sync=0 ; set to 1 for composite sync on HSync signal of VGA output.
|
|
vga_scaler=0 ; set to 1 to connect VGA to scaler output.
|
|
hdmi_audio_96k=0 ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
|
|
keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)
|
|
volumectl=0 ; enable audio volume control by multimedia keys
|
|
vscale_mode=0 ; 0 - scale to fit the screen height.
|
|
; 1 - use integer scale only.
|
|
; 2 - use 0.5 steps of scale.
|
|
; 3 - use 0.25 steps of scale.
|
|
vscale_border=0 ; set vertical border for TVs cutting the upper/bottom parts of screen (1-99)
|
|
;bootscreen=0 ; uncomment to disable boot screen of some cores like Minimig.
|
|
;mouse_throttle=10 ; 1-100 mouse speed divisor. Useful for very sensitive mouses
|
|
rbf_hide_datecode=0 ; 1 - hides datecodes from rbf file names. Press F2 for quick temporary toggle
|
|
menu_pal=0 ; 1 - PAL mode for menu core
|
|
|
|
; lastcore - Autoboot the last loaded core (corename autosaved in CONFIG/lastcore.dat) first found on the SD/USB
|
|
; lastexactcore - Autoboot the last loaded exact core (corename_yyyymmdd.rbf autosaved in CONFIG/lastcore.dat) first found on the SD/USB
|
|
; corename - Autoboot first corename_*.rbf found on the SD/USB
|
|
; corename_yyyymmdd.rbf - Autoboot first corename_yyyymmdd.rbf found on the SD/USB
|
|
;bootcore=lastcore ; uncomment to autoboot a core, as the last loaded core.
|
|
bootcore_timeout=10 ; 10-30 timeout before autoboot, comment for autoboot without timeout.
|
|
|
|
; USER button emulation by keybaord. Usually it's reset button.
|
|
; 0 - lctrl+lalt+ralt (lctrl+lgui+rgui on keyrah)
|
|
; 1 - lctrl+lgui+rgui
|
|
; 2 - lctrl+lalt+del
|
|
; 3 - same as 0 (lctrl+lalt+ralt on keyrah)
|
|
reset_combo=0
|
|
|
|
dvi_mode=0 ; set to 1 for DVI mode. Audio won't be transmitted through HDMI in DVI mode.
|
|
|
|
; 0 - 1280x720@60
|
|
; 1 - 1024x768@60
|
|
; 2 - 720x480@60
|
|
; 3 - 720x576@50
|
|
; 4 - 1280x1024@60
|
|
; 5 - 800x600@60
|
|
; 6 - 640x480@60
|
|
; 7 - 1280x720@50
|
|
; 8 - 1920x1080@60
|
|
; 9 - 1920x1080@50
|
|
;10 - 1366x768@60
|
|
;11 - 1024x600@60
|
|
;
|
|
; custom mode: hact,hfp,hs,hbp,vact,vfp,vs,vbp,Fpix_in_KHz
|
|
; video_mode=1280,110,40,220,720,5,5,20,74250
|
|
video_mode=0
|
|
|
|
; set to 1-10 (seconds) to display video info on startup/change
|
|
video_info=0
|
|
|
|
; Set to 1 for automatic HDMI VSync rate adjust to match original VSync.
|
|
; Set to 2 for low latency mode (single buffer).
|
|
; This option makes video butter smooth like on original emulated system.
|
|
; Adjusting is done by changing pixel clock. Not every display supports variable pixel clock.
|
|
; For proper adjusting and to reduce possible out of range pixel clock, use 60Hz HDMI video
|
|
; modes as a base even for 50Hz systems.
|
|
vsync_adjust=0
|
|
|
|
; These parameters have the same format as video_mode.
|
|
; You need to supply both PAL and NTSC modes if you want vsync_adjust to switch between
|
|
; predefined modes as a base. This will reduce the range of pixel clock.
|
|
;video_mode_ntsc=0
|
|
;video_mode_pal=7
|